Este contenido no está disponible en el idioma seleccionado.
Chapter 3. Installing the Migration Toolkit for Containers
You can install the Migration Toolkit for Containers (MTC) on OpenShift Container Platform 4.
To install MTC on OpenShift Container Platform 3, see Installing the legacy Migration Toolkit for Containers Operator on OpenShift Container Platform 3.
By default, the MTC web console and the Migration Controller
pod run on the target cluster. You can configure the Migration Controller
custom resource manifest to run the MTC web console and the Migration Controller
pod on a remote cluster.
After you have installed MTC, you must configure an object storage to use as a replication repository.
To uninstall MTC, see Uninstalling MTC and deleting resources.
3.1. Compatibility guidelines
You must install the Migration Toolkit for Containers (MTC) Operator that is compatible with your OpenShift Container Platform version.
Definitions
- legacy platform
- OpenShift Container Platform 4.5 and earlier.
- modern platform
- OpenShift Container Platform 4.6 and later.
- legacy operator
- The MTC Operator designed for legacy platforms.
- modern operator
- The MTC Operator designed for modern platforms.
- control cluster
- The cluster that runs the MTC controller and GUI.
- remote cluster
- A source or destination cluster for a migration that runs Velero. The Control Cluster communicates with Remote clusters via the Velero API to drive migrations.
You must use the compatible MTC version for migrating your OpenShift Container Platform clusters. For the migration to succeed both your source cluster and the destination cluster must use the same version of MTC.
MTC 1.7 supports migrations from OpenShift Container Platform 3.11 to 4.9.
MTC 1.8 only supports migrations from OpenShift Container Platform 4.10 and later.
Details | OpenShift Container Platform 3.11 | OpenShift Container Platform 4.0 to 4.5 | OpenShift Container Platform 4.6 to 4.9 | OpenShift Container Platform 4.10 or later |
---|---|---|---|---|
Stable MTC version | MTC v.1.7.z | MTC v.1.7.z | MTC v.1.7.z | MTC v.1.8.z |
Installation |
Legacy MTC v.1.7.z operator: Install manually with the [IMPORTANT] This cluster cannot be the control cluster. |
Install with OLM, release channel |
Install with OLM, release channel |
Edge cases exist in which network restrictions prevent modern clusters from connecting to other clusters involved in the migration. For example, when migrating from an OpenShift Container Platform 3.11 cluster on premises to a modern OpenShift Container Platform cluster in the cloud, where the modern cluster cannot connect to the OpenShift Container Platform 3.11 cluster.
With MTC v.1.7.z, if one of the remote clusters is unable to communicate with the control cluster because of network restrictions, use the crane tunnel-api
command.
With the stable MTC release, although you should always designate the most modern cluster as the control cluster, in this specific case it is possible to designate the legacy cluster as the control cluster and push workloads to the remote cluster.
3.2. Installing the legacy Migration Toolkit for Containers Operator on OpenShift Container Platform 4.2 to 4.5
You can install the legacy Migration Toolkit for Containers Operator manually on OpenShift Container Platform versions 4.2 to 4.5.
Prerequisites
-
You must be logged in as a user with
cluster-admin
privileges on all clusters. -
You must have access to
registry.redhat.io
. -
You must have
podman
installed.
Procedure
Log in to
registry.redhat.io
with your Red Hat Customer Portal credentials:$ podman login registry.redhat.io
Download the
operator.yml
file by entering the following command:podman cp $(podman create registry.redhat.io/rhmtc/openshift-migration-legacy-rhel8-operator:v1.7):/operator.yml ./
Download the
controller.yml
file by entering the following command:podman cp $(podman create registry.redhat.io/rhmtc/openshift-migration-legacy-rhel8-operator:v1.7):/controller.yml ./
- Log in to your OpenShift Container Platform source cluster.
Verify that the cluster can authenticate with
registry.redhat.io
:$ oc run test --image registry.redhat.io/ubi9 --command sleep infinity
Create the Migration Toolkit for Containers Operator object:
$ oc create -f operator.yml
Example output
namespace/openshift-migration created rolebinding.rbac.authorization.k8s.io/system:deployers created serviceaccount/migration-operator created customresourcedefinition.apiextensions.k8s.io/migrationcontrollers.migration.openshift.io created role.rbac.authorization.k8s.io/migration-operator created rolebinding.rbac.authorization.k8s.io/migration-operator created clusterrolebinding.rbac.authorization.k8s.io/migration-operator created deployment.apps/migration-operator created Error from server (AlreadyExists): error when creating "./operator.yml": rolebindings.rbac.authorization.k8s.io "system:image-builders" already exists 1 Error from server (AlreadyExists): error when creating "./operator.yml": rolebindings.rbac.authorization.k8s.io "system:image-pullers" already exists
- 1
- You can ignore
Error from server (AlreadyExists)
messages. They are caused by the Migration Toolkit for Containers Operator creating resources for earlier versions of OpenShift Container Platform 4 that are provided in later releases.
Create the
MigrationController
object:$ oc create -f controller.yml
Verify that the MTC pods are running:
$ oc get pods -n openshift-migration
3.3. Installing the Migration Toolkit for Containers Operator on OpenShift Container Platform 4.16
You install the Migration Toolkit for Containers Operator on OpenShift Container Platform 4.16 by using the Operator Lifecycle Manager.
Prerequisites
-
You must be logged in as a user with
cluster-admin
privileges on all clusters.
Procedure
-
In the OpenShift Container Platform web console, click Operators
OperatorHub. - Use the Filter by keyword field to find the Migration Toolkit for Containers Operator.
- Select the Migration Toolkit for Containers Operator and click Install.
Click Install.
On the Installed Operators page, the Migration Toolkit for Containers Operator appears in the openshift-migration project with the status Succeeded.
- Click Migration Toolkit for Containers Operator.
- Under Provided APIs, locate the Migration Controller tile, and click Create Instance.
- Click Create.
-
Click Workloads
Pods to verify that the MTC pods are running.
3.4. Proxy configuration
For OpenShift Container Platform 4.1 and earlier versions, you must configure proxies in the MigrationController
custom resource (CR) manifest after you install the Migration Toolkit for Containers Operator because these versions do not support a cluster-wide proxy
object.
For OpenShift Container Platform 4.2 to 4.16, the MTC inherits the cluster-wide proxy settings. You can change the proxy parameters if you want to override the cluster-wide proxy settings.
3.4.1. Direct volume migration
Direct Volume Migration (DVM) was introduced in MTC 1.4.2. DVM supports only one proxy. The source cluster cannot access the route of the target cluster if the target cluster is also behind a proxy.
If you want to perform a DVM from a source cluster behind a proxy, you must configure a TCP proxy that works at the transport layer and forwards the SSL connections transparently without decrypting and re-encrypting them with their own SSL certificates. A Stunnel proxy is an example of such a proxy.
3.4.1.1. TCP proxy setup for DVM
You can set up a direct connection between the source and the target cluster through a TCP proxy and configure the stunnel_tcp_proxy
variable in the MigrationController
CR to use the proxy:
apiVersion: migration.openshift.io/v1alpha1 kind: MigrationController metadata: name: migration-controller namespace: openshift-migration spec: [...] stunnel_tcp_proxy: http://username:password@ip:port
Direct volume migration (DVM) supports only basic authentication for the proxy. Moreover, DVM works only from behind proxies that can tunnel a TCP connection transparently. HTTP/HTTPS proxies in man-in-the-middle mode do not work. The existing cluster-wide proxies might not support this behavior. As a result, the proxy settings for DVM are intentionally kept different from the usual proxy configuration in MTC.
3.4.1.2. Why use a TCP proxy instead of an HTTP/HTTPS proxy?
You can enable DVM by running Rsync between the source and the target cluster over an OpenShift route. Traffic is encrypted using Stunnel, a TCP proxy. The Stunnel running on the source cluster initiates a TLS connection with the target Stunnel and transfers data over an encrypted channel.
Cluster-wide HTTP/HTTPS proxies in OpenShift are usually configured in man-in-the-middle mode where they negotiate their own TLS session with the outside servers. However, this does not work with Stunnel. Stunnel requires that its TLS session be untouched by the proxy, essentially making the proxy a transparent tunnel which simply forwards the TCP connection as-is. Therefore, you must use a TCP proxy.
3.4.1.3. Known issue
Migration fails with error Upgrade request required
The migration Controller uses the SPDY protocol to execute commands within remote pods. If the remote cluster is behind a proxy or a firewall that does not support the SPDY protocol, the migration controller fails to execute remote commands. The migration fails with the error message Upgrade request required
. Workaround: Use a proxy that supports the SPDY protocol.
In addition to supporting the SPDY protocol, the proxy or firewall also must pass the Upgrade
HTTP header to the API server. The client uses this header to open a websocket connection with the API server. If the Upgrade
header is blocked by the proxy or firewall, the migration fails with the error message Upgrade request required
. Workaround: Ensure that the proxy forwards the Upgrade
header.
3.4.2. Tuning network policies for migrations
OpenShift supports restricting traffic to or from pods using NetworkPolicy or EgressFirewalls based on the network plugin used by the cluster. If any of the source namespaces involved in a migration use such mechanisms to restrict network traffic to pods, the restrictions might inadvertently stop traffic to Rsync pods during migration.
Rsync pods running on both the source and the target clusters must connect to each other over an OpenShift Route. Existing NetworkPolicy or EgressNetworkPolicy objects can be configured to automatically exempt Rsync pods from these traffic restrictions.
3.4.2.1. NetworkPolicy configuration
3.4.2.1.1. Egress traffic from Rsync pods
You can use the unique labels of Rsync pods to allow egress traffic to pass from them if the NetworkPolicy
configuration in the source or destination namespaces blocks this type of traffic. The following policy allows all egress traffic from Rsync pods in the namespace:
apiVersion: networking.k8s.io/v1 kind: NetworkPolicy metadata: name: allow-all-egress-from-rsync-pods spec: podSelector: matchLabels: owner: directvolumemigration app: directvolumemigration-rsync-transfer egress: - {} policyTypes: - Egress
3.4.2.1.2. Ingress traffic to Rsync pods
apiVersion: networking.k8s.io/v1 kind: NetworkPolicy metadata: name: allow-all-egress-from-rsync-pods spec: podSelector: matchLabels: owner: directvolumemigration app: directvolumemigration-rsync-transfer ingress: - {} policyTypes: - Ingress
3.4.2.2. EgressNetworkPolicy configuration
The EgressNetworkPolicy
object or Egress Firewalls are OpenShift constructs designed to block egress traffic leaving the cluster.
Unlike the NetworkPolicy
object, the Egress Firewall works at a project level because it applies to all pods in the namespace. Therefore, the unique labels of Rsync pods do not exempt only Rsync pods from the restrictions. However, you can add the CIDR ranges of the source or target cluster to the Allow rule of the policy so that a direct connection can be setup between two clusters.
Based on which cluster the Egress Firewall is present in, you can add the CIDR range of the other cluster to allow egress traffic between the two:
apiVersion: network.openshift.io/v1 kind: EgressNetworkPolicy metadata: name: test-egress-policy namespace: <namespace> spec: egress: - to: cidrSelector: <cidr_of_source_or_target_cluster> type: Deny
3.4.2.3. Choosing alternate endpoints for data transfer
By default, DVM uses an OpenShift Container Platform route as an endpoint to transfer PV data to destination clusters. You can choose another type of supported endpoint, if cluster topologies allow.
For each cluster, you can configure an endpoint by setting the rsync_endpoint_type
variable on the appropriate destination cluster in your MigrationController
CR:
apiVersion: migration.openshift.io/v1alpha1 kind: MigrationController metadata: name: migration-controller namespace: openshift-migration spec: [...] rsync_endpoint_type: [NodePort|ClusterIP|Route]
3.4.2.4. Configuring supplemental groups for Rsync pods
When your PVCs use a shared storage, you can configure the access to that storage by adding supplemental groups to Rsync pod definitions in order for the pods to allow access:
Variable | Type | Default | Description |
---|---|---|---|
| string | Not set | Comma-separated list of supplemental groups for source Rsync pods |
| string | Not set | Comma-separated list of supplemental groups for target Rsync pods |
Example usage
The MigrationController
CR can be updated to set values for these supplemental groups:
spec: src_supplemental_groups: "1000,2000" target_supplemental_groups: "2000,3000"
3.4.3. Configuring proxies
Prerequisites
-
You must be logged in as a user with
cluster-admin
privileges on all clusters.
Procedure
Get the
MigrationController
CR manifest:$ oc get migrationcontroller <migration_controller> -n openshift-migration
Update the proxy parameters:
apiVersion: migration.openshift.io/v1alpha1 kind: MigrationController metadata: name: <migration_controller> namespace: openshift-migration ... spec: stunnel_tcp_proxy: http://<username>:<password>@<ip>:<port> 1 noProxy: example.com 2
Preface a domain with
.
to match subdomains only. For example,.y.com
matchesx.y.com
, but noty.com
. Use*
to bypass proxy for all destinations. If you scale up workers that are not included in the network defined by thenetworking.machineNetwork[].cidr
field from the installation configuration, you must add them to this list to prevent connection issues.This field is ignored if neither the
httpProxy
nor thehttpsProxy
field is set.-
Save the manifest as
migration-controller.yaml
. Apply the updated manifest:
$ oc replace -f migration-controller.yaml -n openshift-migration
For more information, see Configuring the cluster-wide proxy.
3.4.4. Running Rsync as either root or non-root
OpenShift Container Platform environments have the PodSecurityAdmission
controller enabled by default. This controller requires cluster administrators to enforce Pod Security Standards by means of namespace labels. All workloads in the cluster are expected to run one of the following Pod Security Standard levels: Privileged
, Baseline
or Restricted
. Every cluster has its own default policy set.
To guarantee successful data transfer in all environments, Migration Toolkit for Containers (MTC) 1.7.5 introduced changes in Rsync pods, including running Rsync pods as non-root user by default. This ensures that data transfer is possible even for workloads that do not necessarily require higher privileges. This change was made because it is best to run workloads with the lowest level of privileges possible.
3.4.4.1. Manually overriding default non-root operation for data transfer
Although running Rsync pods as non-root user works in most cases, data transfer might fail when you run workloads as root user on the source side. MTC provides two ways to manually override default non-root operation for data transfer:
- Configure all migrations to run an Rsync pod as root on the destination cluster for all migrations.
- Run an Rsync pod as root on the destination cluster per migration.
In both cases, you must set the following labels on the source side of any namespaces that are running workloads with higher privileges before migration: enforce
, audit
, and warn.
To learn more about Pod Security Admission and setting values for labels, see Controlling pod security admission synchronization.
3.4.4.2. Configuring the MigrationController CR as root or non-root for all migrations
By default, Rsync runs as non-root.
On the destination cluster, you can configure the MigrationController
CR to run Rsync as root.
Procedure
Configure the
MigrationController
CR as follows:apiVersion: migration.openshift.io/v1alpha1 kind: MigrationController metadata: name: migration-controller namespace: openshift-migration spec: [...] migration_rsync_privileged: true
This configuration will apply to all future migrations.
3.4.4.3. Configuring the MigMigration CR as root or non-root per migration
On the destination cluster, you can configure the MigMigration
CR to run Rsync as root or non-root, with the following non-root options:
- As a specific user ID (UID)
- As a specific group ID (GID)
Procedure
To run Rsync as root, configure the
MigMigration
CR according to this example:apiVersion: migration.openshift.io/v1alpha1 kind: MigMigration metadata: name: migration-controller namespace: openshift-migration spec: [...] runAsRoot: true
To run Rsync as a specific User ID (UID) or as a specific Group ID (GID), configure the
MigMigration
CR according to this example:apiVersion: migration.openshift.io/v1alpha1 kind: MigMigration metadata: name: migration-controller namespace: openshift-migration spec: [...] runAsUser: 10010001 runAsGroup: 3
3.5. Configuring a replication repository
You must configure an object storage to use as a replication repository. The Migration Toolkit for Containers (MTC) copies data from the source cluster to the replication repository, and then from the replication repository to the target cluster.
MTC supports the file system and snapshot data copy methods for migrating data from the source cluster to the target cluster. Select a method that is suited for your environment and is supported by your storage provider.
MTC supports the following storage providers:
- Multicloud Object Gateway
- Amazon Web Services S3
- Google Cloud Platform
- Microsoft Azure Blob
- Generic S3 object storage, for example, Minio or Ceph S3
3.5.1. Prerequisites
- All clusters must have uninterrupted network access to the replication repository.
- If you use a proxy server with an internally hosted replication repository, you must ensure that the proxy allows access to the replication repository.
3.5.2. Retrieving Multicloud Object Gateway credentials
You must retrieve the Multicloud Object Gateway (MCG) credentials and S3 endpoint, which you need to configure MCG as a replication repository for the Migration Toolkit for Containers (MTC).
You must retrieve the Multicloud Object Gateway (MCG) credentials, which you need to create a Secret
custom resource (CR) for MTC.
Although the MCG Operator is deprecated, the MCG plugin is still available for OpenShift Data Foundation. To download the plugin, browse to Download Red Hat OpenShift Data Foundation and download the appropriate MCG plugin for your operating system.
Prerequisites
- You must deploy OpenShift Data Foundation by using the appropriate Red Hat OpenShift Data Foundation deployment guide.
Procedure
Obtain the S3 endpoint,
AWS_ACCESS_KEY_ID
, andAWS_SECRET_ACCESS_KEY
by running thedescribe
command on theNooBaa
custom resource.You use these credentials to add MCG as a replication repository.
3.5.3. Configuring Amazon Web Services
You configure Amazon Web Services (AWS) S3 object storage as a replication repository for the Migration Toolkit for Containers (MTC) .
Prerequisites
- You must have the AWS CLI installed.
- The AWS S3 storage bucket must be accessible to the source and target clusters.
If you are using the snapshot copy method:
- You must have access to EC2 Elastic Block Storage (EBS).
- The source and target clusters must be in the same region.
- The source and target clusters must have the same storage class.
- The storage class must be compatible with snapshots.
Procedure
Set the
BUCKET
variable:$ BUCKET=<your_bucket>
Set the
REGION
variable:$ REGION=<your_region>
Create an AWS S3 bucket:
$ aws s3api create-bucket \ --bucket $BUCKET \ --region $REGION \ --create-bucket-configuration LocationConstraint=$REGION 1
- 1
us-east-1
does not support aLocationConstraint
. If your region isus-east-1
, omit--create-bucket-configuration LocationConstraint=$REGION
.
Create an IAM user:
$ aws iam create-user --user-name velero 1
- 1
- If you want to use Velero to back up multiple clusters with multiple S3 buckets, create a unique user name for each cluster.
Create a
velero-policy.json
file:$ cat > velero-policy.json <<EOF { "Version": "2012-10-17", "Statement": [ { "Effect": "Allow", "Action": [ "ec2:DescribeVolumes", "ec2:DescribeSnapshots", "ec2:CreateTags", "ec2:CreateVolume", "ec2:CreateSnapshot", "ec2:DeleteSnapshot" ], "Resource": "*" }, { "Effect": "Allow", "Action": [ "s3:GetObject", "s3:DeleteObject", "s3:PutObject", "s3:AbortMultipartUpload", "s3:ListMultipartUploadParts" ], "Resource": [ "arn:aws:s3:::${BUCKET}/*" ] }, { "Effect": "Allow", "Action": [ "s3:ListBucket", "s3:GetBucketLocation", "s3:ListBucketMultipartUploads" ], "Resource": [ "arn:aws:s3:::${BUCKET}" ] } ] } EOF
Attach the policies to give the
velero
user the minimum necessary permissions:$ aws iam put-user-policy \ --user-name velero \ --policy-name velero \ --policy-document file://velero-policy.json
Create an access key for the
velero
user:$ aws iam create-access-key --user-name velero
Example output
{ "AccessKey": { "UserName": "velero", "Status": "Active", "CreateDate": "2017-07-31T22:24:41.576Z", "SecretAccessKey": <AWS_SECRET_ACCESS_KEY>, "AccessKeyId": <AWS_ACCESS_KEY_ID> } }
Record the
AWS_SECRET_ACCESS_KEY
and theAWS_ACCESS_KEY_ID
. You use the credentials to add AWS as a replication repository.
3.5.4. Configuring Google Cloud Platform
You configure a Google Cloud Platform (GCP) storage bucket as a replication repository for the Migration Toolkit for Containers (MTC).
Prerequisites
-
You must have the
gcloud
andgsutil
CLI tools installed. See the Google cloud documentation for details. - The GCP storage bucket must be accessible to the source and target clusters.
If you are using the snapshot copy method:
- The source and target clusters must be in the same region.
- The source and target clusters must have the same storage class.
- The storage class must be compatible with snapshots.
Procedure
Log in to GCP:
$ gcloud auth login
Set the
BUCKET
variable:$ BUCKET=<bucket> 1
- 1
- Specify your bucket name.
Create the storage bucket:
$ gsutil mb gs://$BUCKET/
Set the
PROJECT_ID
variable to your active project:$ PROJECT_ID=$(gcloud config get-value project)
Create a service account:
$ gcloud iam service-accounts create velero \ --display-name "Velero service account"
List your service accounts:
$ gcloud iam service-accounts list
Set the
SERVICE_ACCOUNT_EMAIL
variable to match itsemail
value:$ SERVICE_ACCOUNT_EMAIL=$(gcloud iam service-accounts list \ --filter="displayName:Velero service account" \ --format 'value(email)')
Attach the policies to give the
velero
user the minimum necessary permissions:$ ROLE_PERMISSIONS=( compute.disks.get compute.disks.create compute.disks.createSnapshot compute.snapshots.get compute.snapshots.create compute.snapshots.useReadOnly compute.snapshots.delete compute.zones.get storage.objects.create storage.objects.delete storage.objects.get storage.objects.list iam.serviceAccounts.signBlob )
Create the
velero.server
custom role:$ gcloud iam roles create velero.server \ --project $PROJECT_ID \ --title "Velero Server" \ --permissions "$(IFS=","; echo "${ROLE_PERMISSIONS[*]}")"
Add IAM policy binding to the project:
$ gcloud projects add-iam-policy-binding $PROJECT_ID \ --member serviceAccount:$SERVICE_ACCOUNT_EMAIL \ --role projects/$PROJECT_ID/roles/velero.server
Update the IAM service account:
$ gsutil iam ch serviceAccount:$SERVICE_ACCOUNT_EMAIL:objectAdmin gs://${BUCKET}
Save the IAM service account keys to the
credentials-velero
file in the current directory:$ gcloud iam service-accounts keys create credentials-velero \ --iam-account $SERVICE_ACCOUNT_EMAIL
You use the
credentials-velero
file to add GCP as a replication repository.
3.5.5. Configuring Microsoft Azure
You configure a Microsoft Azure Blob storage container as a replication repository for the Migration Toolkit for Containers (MTC).
Prerequisites
- You must have the Azure CLI installed.
- The Azure Blob storage container must be accessible to the source and target clusters.
If you are using the snapshot copy method:
- The source and target clusters must be in the same region.
- The source and target clusters must have the same storage class.
- The storage class must be compatible with snapshots.
Procedure
Log in to Azure:
$ az login
Set the
AZURE_RESOURCE_GROUP
variable:$ AZURE_RESOURCE_GROUP=Velero_Backups
Create an Azure resource group:
$ az group create -n $AZURE_RESOURCE_GROUP --location CentralUS 1
- 1
- Specify your location.
Set the
AZURE_STORAGE_ACCOUNT_ID
variable:$ AZURE_STORAGE_ACCOUNT_ID="velero$(uuidgen | cut -d '-' -f5 | tr '[A-Z]' '[a-z]')"
Create an Azure storage account:
$ az storage account create \ --name $AZURE_STORAGE_ACCOUNT_ID \ --resource-group $AZURE_RESOURCE_GROUP \ --sku Standard_GRS \ --encryption-services blob \ --https-only true \ --kind BlobStorage \ --access-tier Hot
Set the
BLOB_CONTAINER
variable:$ BLOB_CONTAINER=velero
Create an Azure Blob storage container:
$ az storage container create \ -n $BLOB_CONTAINER \ --public-access off \ --account-name $AZURE_STORAGE_ACCOUNT_ID
Create a service principal and credentials for
velero
:$ AZURE_SUBSCRIPTION_ID=`az account list --query '[?isDefault].id' -o tsv` AZURE_TENANT_ID=`az account list --query '[?isDefault].tenantId' -o tsv`
Create a service principal with the
Contributor
role, assigning a specific--role
and--scopes
:$ AZURE_CLIENT_SECRET=`az ad sp create-for-rbac --name "velero" \ --role "Contributor" \ --query 'password' -o tsv \ --scopes /subscriptions/$AZURE_SUBSCRIPTION_ID/resourceGroups/$AZURE_RESOURCE_GROUP`
The CLI generates a password for you. Ensure you capture the password.
After creating the service principal, obtain the client id.
$ AZURE_CLIENT_ID=`az ad app credential list --id <your_app_id>`
NoteFor this to be successful, you must know your Azure application ID.
Save the service principal credentials in the
credentials-velero
file:$ cat << EOF > ./credentials-velero AZURE_SUBSCRIPTION_ID=${AZURE_SUBSCRIPTION_ID} AZURE_TENANT_ID=${AZURE_TENANT_ID} AZURE_CLIENT_ID=${AZURE_CLIENT_ID} AZURE_CLIENT_SECRET=${AZURE_CLIENT_SECRET} AZURE_RESOURCE_GROUP=${AZURE_RESOURCE_GROUP} AZURE_CLOUD_NAME=AzurePublicCloud EOF
You use the
credentials-velero
file to add Azure as a replication repository.
3.5.6. Additional resources
3.6. Uninstalling MTC and deleting resources
You can uninstall the Migration Toolkit for Containers (MTC) and delete its resources to clean up the cluster.
Deleting the velero
CRDs removes Velero from the cluster.
Prerequisites
-
You must be logged in as a user with
cluster-admin
privileges.
Procedure
Delete the
MigrationController
custom resource (CR) on all clusters:$ oc delete migrationcontroller <migration_controller>
- Uninstall the Migration Toolkit for Containers Operator on OpenShift Container Platform 4 by using the Operator Lifecycle Manager.
Delete cluster-scoped resources on all clusters by running the following commands:
migration
custom resource definitions (CRDs):$ oc delete $(oc get crds -o name | grep 'migration.openshift.io')
velero
CRDs:$ oc delete $(oc get crds -o name | grep 'velero')
migration
cluster roles:$ oc delete $(oc get clusterroles -o name | grep 'migration.openshift.io')
migration-operator
cluster role:$ oc delete clusterrole migration-operator
velero
cluster roles:$ oc delete $(oc get clusterroles -o name | grep 'velero')
migration
cluster role bindings:$ oc delete $(oc get clusterrolebindings -o name | grep 'migration.openshift.io')
migration-operator
cluster role bindings:$ oc delete clusterrolebindings migration-operator
velero
cluster role bindings:$ oc delete $(oc get clusterrolebindings -o name | grep 'velero')