Chapter 16. Configuring hybrid networking

Procedure

1. To configure the OVN-Kubernetes hybrid network overlay, enter the following command:

   $ oc patch networks.operator.openshift.io cluster --type=merge \
     -p '{
       "spec":{
         "defaultNetwork":{
           "ovnKubernetesConfig":{
             "hybridOverlayConfig":{
               "hybridClusterNetwork":[
                 {
                   "cidr": "<cidr>",
                   "hostPrefix": <prefix>
                 }
               ],
               "hybridOverlayVXLANPort": <overlay_port>
             }
           }
         }
       }
     }'

   Copy to Clipboard Toggle word wrap

   where:

   cidr

   Specify the CIDR configuration used for nodes on the additional overlay network. This CIDR must not overlap with the cluster network CIDR.

   hostPrefix

   Specifies the subnet prefix length to assign to each individual node. For example, if hostPrefix is set to 23, then each node is assigned a /23 subnet out of the given cidr, which allows for 510 (2^(32 - 23) - 2) pod IP addresses. If you are required to provide access to nodes from an external network, configure load balancers and routers to manage the traffic.

   hybridOverlayVXLANPort

   Specify a custom VXLAN port for the additional overlay network. This is required for running Windows nodes in a cluster installed on vSphere, and must not be configured for any other cloud provider. The custom port can be any open port excluding the default 4789 port. For more information on this requirement, see Pod-to-pod connectivity between hosts is broken in the Microsoft documentation.

   Note

   Windows Server Long-Term Servicing Channel (LTSC): Windows Server 2019 is not supported on clusters with a custom hybridOverlayVXLANPort value because this Windows server version does not support selecting a custom VXLAN port.

   Example output

   network.operator.openshift.io/cluster patched

   Copy to Clipboard Toggle word wrap

2. To confirm that the configuration is active, enter the following command. It can take several minutes for the update to apply.

   $ oc get network.operator.openshift.io -o jsonpath="{.items[0].spec.defaultNetwork.ovnKubernetesConfig}"

   Copy to Clipboard Toggle word wrap