Este contenido no está disponible en el idioma seleccionado.
Appendix G. Broker Properties
The following is a list of AMQ Broker properties which can be applied directly to the internal java configuration bean instead of using the XML configuration.
criticalAnalyzerCheckPeriod
Type: long
Default: 0
XML name: critical-analyzer-check-period
Description: The period defaults to half the critical-analyzer-timeout and is calculated at runtime.
pageMaxConcurrentIO
Type: int
Default: 5
XML name: page-max-concurrent-io
Description: The maximum number of concurrent reads allowed during paging.
messageCounterSamplePeriod
Type: long
Default: 10000
XML name: message-counter-sample-period
Description: The sample period (in ms) to use for message counters.
networkCheckNIC
Type: String
Default:
XML name: network-check-nic
Description: The network interface card name to be used to validate the address.
globalMaxSize
Type: long
Default: -1
XML name: global-max-size
Description: Size (in bytes) before all addresses will enter into their Full Policy configured upon messages being produced. Supports byte notation like "K", "Mb", "MiB", "GB", etc.
journalFileSize
Type: int
Default: 10485760
XML name: journal-file-size
Description: The size (in bytes) of each journal file. Supports byte notation, for example: "K", "Mb", "MiB", "GB".
configurationFileRefreshPeriod
Type: long
Default: 5000
XML name: configuration-file-refresh-period
Description: The frequency (in ms) to check the configuration file for modifications.
diskScanPeriod
Type: int
Default: 5000
XML name: disk-scan-period
Description: The frequency, in milliseconds, to scan the disks for full disks.
journalRetentionDirectory
Type: String
Default:
XML name: journal-retention-directory
Description: The directory in which to store journal-retention messages and the retention configuration.
networkCheckPeriod
Type: long
Default: 10000
XML name: network-check-period
Description: The frequency, in milliseconds, at which to check if the network is up.
journalBufferSize_AIO
Type: int
Default: 501760
XML name: journal-buffer-size
Description: The size, in bytes, of the internal buffer on the journal. Supports byte notation, for example, "K", "Mb", "MiB", "GB".
networkCheckURLList
Type: String
Default:
XML name: network-check-URL-list
Description: A comma separated list of URLs to use to validate if the broker should be kept up.
networkCheckTimeout
Type: int
Default: 1000
XML name: network-check-timeout
Description: The timeout, in milliseconds, to be used on the ping.
pageSyncTimeout
Type: int
Default:
XML name: page-sync-timeout
Description: The timeout, in nanoseconds, used to sync pages. The exact default value depend on whether the journal is ASYNCIO or NIO.
journalPoolFiles
Type: int
Default: -1
XML name: journal-pool-files
Description: The number of journal files to pre-create.
criticalAnalyzer
Type: boolean
Default: true
XML name: critical-analyzer
Description: Should analyze response time on critical paths and decide for broker log, shutdown or halt.
readWholePage
Type: boolean
Default: false
XML name: read-whole-page
Description: Specifies whether the whole page is read while getting message after page cache is evicted.
maxDiskUsage
Type: int
Default: 90
XML name: max-disk-usage
Description: The maximum percentage of disk usage before the system blocks or fails clients.
globalMaxMessages
Type: long
Default: -1
XML name: global-max-messages
Description: Number of messages before all addresses will enter into their address full policy configured. It works in conjunction with global-max-size, with the configured address fully policy being executed when either limit is reached.
internalNamingPrefix
Type: String
Default:
XML name: internal-naming-prefix
Description: Artemis uses internal queues and addresses to implement certain behaviors. These queues and addresses are prefixed by default with "$.activemq.internal" to avoid naming clashes with user namespacing. This can be overridden by setting this value to a valid Artemis address.
journalFileOpenTimeout
Type: int
Default: 5
XML name: journal-file-open-timeout
Description: The time, in seconds, to wait when opening a new Journal file before timing out and failing.
journalCompactPercentage
Type: int
Default: 30
XML name: journal-compact-percentage
Description: The percentage of live data on which to consider compacting the journal.
createBindingsDir
Type: boolean
Default: true
XML name: create-bindings-dir
Description: A value of true causes the server to create the bindings directory at startup.
suppressSessionNotifications
Type: boolean
Default: false
XML name: suppress-session-notifications
Description: Whether or not to suppress SESSION_CREATED and SESSION_CLOSED notifications. Set to true to reduce notification overhead. However, these are required to enforce unique client ID utilization in a cluster for MQTT clients.
journalBufferTimeout_AIO
Type: int
Default:
XML name: journal-buffer-timeout
Description: The timeout,in nanoseconds, used to flush internal buffers on the journal. The exact default value depends on whether the journal is ASYNCIO or NIO.
journalType
Type: JournalType
Default: ASYNCIO
XML name: journal-type
Description: The type of journal to use.
name
Type: String
Default:
XML name: name
Description: Node name. If set, it is used in topology notifications.
networkCheckPingCommand
Type: String
Default:
XML name: network-check-ping-command
Description: The ping command used to ping IPV4 addresses.
temporaryQueueNamespace
Type: String
Default:
XML name: temporary-queue-namespace
Description: The namespace to use for looking up address settings for temporary queues.
pagingDirectory
Type: String
Default: data/paging
XML name: paging-directory
Description: The directory in which to store paged messages.
journalDirectory
Type: String
Default: data/journal
XML name: journal-directory
Description: The directory in which store the journal files.
journalBufferSize_NIO
Type: int
Default: 501760
XML name: journal-buffer-size
Description: The size, in bytes, of the internal buffer on the journal. Supports byte notation, for example: "K", "Mb", "MiB", "GB".
journalDeviceBlockSize
Type: Integer
Default:
XML name: journal-device-block-size
Description: The size, in bytes, used by the device. This is usually translated as fstat/st_blksize and this is a way to bypass the value returned as st_blksize.
nodeManagerLockDirectory
Type: String
Default:
XML name: node-manager-lock-directory
Description: The directory in which to store the node manager lock file.
messageCounterMaxDayHistory
Type: int
Default: 10
XML name: message-counter-max-day-history
Description: The number of days to keep message counter history.
largeMessagesDirectory
Type: String
Default: data/largemessages
XML name: large-messages-directory
Description: The directory in which to store large messages.
networkCheckPing6Command
Type: String
Default:
XML name: network-check-ping6-command
Description: The ping command used to ping IPV6 addresses.
memoryWarningThreshold
Type: int
Default: 25
XML name: memory-warning-threshold
Description: Percentage of available memory at which a warning is generated.
mqttSessionScanInterval
Type: long
Default: 5000
XML name: mqtt-session-scan-interval
Description: The frequency, in milliseconds, at which to scan for expired MQTT sessions.
journalMaxAtticFiles
Type: int
Default:
XML name: journal-max-attic-files
Description:
journalSyncTransactional
Type: boolean
Default: true
XML name: journal-sync-transactional
Description: If set to true, waits for transaction data to be synchronized to the journal before returning a response to client.
logJournalWriteRate
Type: boolean
Default: false
XML name: log-journal-write-rate
Description: Specifies whether to log messages related to the journal write-rate.
journalMaxIO_AIO
Type: int
Default:
XML name: journal-max-io
Description: The maximum number of write requests that can be in the AIO queue at any one time. The default is 500 for AIO and 1 for NIO.
messageExpiryScanPeriod
Type: long
Default: 30000
XML name: message-expiry-scan-period
Description: The frequency, in milliseconds, to scan for expired messages.
criticalAnalyzerTimeout
Type: long
Default: 120000
XML name: critical-analyzer-timeout
Description: The default timeout used to analyze timeouts on the critical path.
messageCounterEnabled
Type: boolean
Default: false
XML name: message-counter-enabled
Description: A value of true means that message counters are enabled.
journalCompactMinFiles
Type: int
Default: 10
XML name: journal-compact-min-files
Description: The minimum number of data files before the broker starts to compact files.
createJournalDir
Type: boolean
Default: true
XML name: create-journal-dir
Description: A value of true means that the journal directory is created.
addressQueueScanPeriod
Type: long
Default: 30000
XML name: address-queue-scan-period
Description: The frequency, in milliseconds, to scan for addresses and queues that need to be deleted.
memoryMeasureInterval
Type: long
Default: -1
XML name: memory-measure-interval
Description: The frequency, in milliseconds, to sample JVM memory. A value of -1 disables memory sampling.
journalSyncNonTransactional
Type: boolean
Default: true
XML name: journal-sync-non-transactional
Description: If true, waits for non transaction data to be synced to the journal before returning a response to the client.
connectionTtlCheckInterval
Type: long
Default: 2000
XML name: connection-ttl-check-interval
Description: The frequency, in milliseconds, to check connections for ttl violations.
rejectEmptyValidatedUser
Type: boolean
Default: false
XML name: reject-empty-validated-user
Description: If true, the server does not allow any message that does not have a validated user. In JMS, this is JMSXUserID.
journalMaxIO_NIO
Type: int
Default:
XML name: journal-max-io
Description: The maximum number of write requests that can be in the AIO queue at any one time. The default is 500 for AIO and 1 for NIO. Currently, broker properties only support using an integer and measures in bytes.
transactionTimeoutScanPeriod
Type: long
Default: 1000
XML name: transaction-timeout-scan-period
Description: The frequency, in milliseconds, to scan for timeout transactions.
systemPropertyPrefix
Type: String
Default:
XML name: system-property-prefix
Description: The prefix used to parse system properties for the configuration.
transactionTimeout
Type: long
Default: 300000
XML name: transaction-timeout
Description: The duration, in milliseconds, before a transaction can be removed from the resource manager after the create time.
journalLockAcquisitionTimeout
Type: long
Default: -1
XML name: journal-lock-acquisition-timeout
Description: The frequency, in milliseconds, to wait to acquire a file lock on the journal.
journalBufferTimeout_NIO
Type: int
Default:
XML name: journal-buffer-timeout
Description: The timeout, in nanoseconds, used to flush internal buffers on the journal. The exact default value depends on whether the journal is ASYNCIO or NIO.
journalMinFiles
Type: int
Default: 2
XML name: journal-min-files
Description: The number of journal files to pre-create.
G.1. bridgeConfigurations
bridgeConfigurations.<name>.retryIntervalMultiplier
Type: double
Default: 1
XML name: retry-interval-multiplier
Description: The multiplier to apply to successive retry intervals.
bridgeConfigurations.<name>.maxRetryInterval
Type: long
Default: 2000
XML name: max-retry-interval
Description: The limit to the retry-interval growth, due to retry-interval-multiplier.
bridgeConfigurations.<name>.filterString
Type: String
Default:
XML name: filter-string
Description:
bridgeConfigurations.<name>.connectionTTL
Type: long
Default: 60000
XML name: connection-ttl
Description: The duration to keep a connection alive if no data is received from the client. The duration should be greater than the ping period.
bridgeConfigurations.<name>.confirmationWindowSize
Type: int
Default: 1048576
XML name: confirmation-window-size
Description: The number of bytes received after which the bridge sends a confirmation. Supports byte notation, for example, "K", "Mb", "MiB", "GB".
bridgeConfigurations.<name>.staticConnectors
Type: List
Default:
XML name: static-connectors
Description:
bridgeConfigurations.<name>.reconnectAttemptsOnSameNode
Type: int
Default:
XML name: reconnect-attempts-on-same-node
Description:
bridgeConfigurations.<name>.concurrency
Type: int
Default: 1
XML name: concurrency
Description: The number of concurrent workers. More workers can help increase throughput on high latency networks. The default is 1.
bridgeConfigurations.<name>.transformerConfiguration
Type: TransformerConfiguration
Default:
XML name: transformer-configuration
Description:
bridgeConfigurations.<name>.transformerConfiguration.className
Type: String
Default:
XML name: class-name
Description:
bridgeConfigurations.<name>.transformerConfiguration.properties
Type: Map
Default:
XML name: property
Description: A KEY/VALUE pair to set on the transformer, for example, properties.MY_PROPERTY=MY_VALUE
bridgeConfigurations.<name>.password
Type: String
Default:
XML name: password
Description: If unspecified, the cluster-password is used.
bridgeConfigurations.<name>.queueName
Type: String
Default:
XML name: queue-name
Description: The name of the queue from which this bridge consumes.
bridgeConfigurations.<name>.forwardingAddress
Type: String
Default:
XML name: forwarding-address
Description: Address to forward to. If omitted, the original address is used.
bridgeConfigurations.<name>.routingType
Type: ComponentConfigurationRoutingType
Default: PASS
XML name: routing-type
Description: How the routing-type on the bridged messages is set.
bridgeConfigurations.<name>.name
Type: String
Default:
XML name: name
Description: A unique name for this bridge.
bridgeConfigurations.<name>.ha
Type: boolean
Default: false
XML name: ha
Description: Specifies whether this bridge supports fail-over.
bridgeConfigurations.<name>.initialConnectAttempts
Type: int
Default: -1
XML name: initial-connect-attempts
Description: The maximum number of initial connection attempts. The default value of -1 means there is no limit.
bridgeConfigurations.<name>.retryInterval
Type: long
Default: 2000
XML name: retry-interval
Description: The interval, in milliseconds, between successive retries.
bridgeConfigurations.<name>.producerWindowSize
Type: int
Default: 1048576
XML name: producer-window-size
Description: Producer flow control. Supports byte notation, for example: "K", "Mb", "MiB", "GB".
bridgeConfigurations.<name>.clientFailureCheckPeriod
Type: long
Default: 30000
XML name: check-period
Description: The interval, in milliseconds, at which a bridge’s client checks if it failed to receive a ping from the server. Specify a value of -1 to disable this check.
bridgeConfigurations.<name>.discoveryGroupName
Type: String
Default:
XML name: discovery-group-ref
Description:
bridgeConfigurations.<name>.user
Type: String
Default:
XML name: user
Description: Username. If unspecified, the cluster-user is used.
bridgeConfigurations.<name>.useDuplicateDetection
Type: boolean
Default: true
XML name: use-duplicate-detection
Description: Specifies whether duplicate detection headers are inserted in forwarded messages.
bridgeConfigurations.<name>.minLargeMessageSize
Type: int
Default: 102400
XML name: min-large-message-size
Description: The size, in bytes, above which a message is considered a large message. Large messages are sent over the network in multiple segments. Supports byte notation, for example, "K", "Mb", "MiB", "GB".
G.2. AMQPConnections
AMQPConnections.<name>.reconnectAttempts
Type: int
Default: -1
XML name: reconnect-attempts
Description: The number of reconnection attempts after a failure.
AMQPConnections.<name>.password
Type: String
Default:
XML name: password
Description: The password used to connect. If not specified, an anonymous connection is attempted.
AMQPConnections.<name>.retryInterval
Type: int
Default: 5000
XML name: retry-interval
Description: The interval, in milliseconds, between successive retries.
AMQPConnections.<name>.connectionElements
Type: AMQPMirrorBrokerConnectionElement
Default:
XML name: amqp-connection
Description: An AMQP Broker Connection supports 4 types: 1. Mirrors - The broker uses an AMQP connection to another broker and duplicates messages and sends acknowledgments over the wire. 2. Senders - Messages received on specific queues are transferred to another endpoint. 3. Receivers - The broker pulls messages from another endpoint. 4. Peers - The broker creates both senders and receivers on another endpoint that knows how to handle them. This is currently implemented by Apache Qpid Dispatch. Currently, only mirror type is supported.
AMQPConnections.<name>.connectionElements.<name>.messageAcknowledgments
Type: boolean
Default:
XML name: message-acknowledgments
Description: If true, message acknowledgments are mirrored.
AMQPConnections.<name>.connectionElements.<name>.queueRemoval
Type: boolean
Default:
XML name: queue-removal
Description: Specifies whether the mirror queue deletes events for addresses and queues.
AMQPConnections.<name>.connectionElements.<name>.addressFilter
Type: String
Default:
XML name: address-filter
Description: Specifies a filter that the mirror uses to determine which events are forwarded towards to the target server based on source address.
AMQPConnections.<name>.connectionElements.<name>.queueCreation
Type: boolean
Default:
XML name: queue-creation
Description: Specifies whether the mirror queue creates events for addresses and queues.
AMQPConnections.<name>.autostart
Type: boolean
Default: true
XML name: auto-start
Description: Specifies whether the broker connection is started when the server is started.
AMQPConnections.<name>.user
Type: String
Default:
XML name: user
Description: User name used to connect. If not specified, an anonymous connection is attempted.
AMQPConnections.<name>.uri
Type: String
Default:
XML name: uri
Description: The URI of the AMQP connection.
G.3. divertConfiguration
divertConfiguration.transformerConfiguration
Type: TransformerConfiguration
Default:
XML name: transformer-configuration
Description:
divertConfiguration.transformerConfiguration.className
Type: String
Default:
XML name: class-name
Description:
divertConfiguration.transformerConfiguration.properties
Type: Map
Default:
XML name: property
Description: A KEY/VALUE pair to set on the transformer, for example, …properties.MY_PROPERTY=MY_VALUE.
divertConfiguration.filterString
Type: String
Default:
XML name: filter-string
Description:
divertConfiguration.routingName
Type: String
Default:
XML name: routing-name
Description: The routing name for the divert.
divertConfiguration.address
Type: String
Default:
XML name: address
Description: The address this divert will divert from.
divertConfiguration.forwardingAddress
Type: String
Default:
XML name: forwarding-address
Description: The forwarding address for the divert.
divertConfiguration.routingType
Type: ComponentConfigurationRoutingType( MULTICAST ANYCAST STRIP PASS )
Default:
XML name: routing-type
Description: How the routing-type on the diverted messages is set.
divertConfiguration.exclusive
Type: boolean
Default: false
XML name: exclusive
Description: Specifies whether this is an exclusive divert.
G.4. addressSettings
addressSettings.<address>.configDeleteDiverts
Type: DeletionPolicy( OFF FORCE )
Default:
XML name: config-delete-addresses
Description:
addressSettings.<address>.expiryQueuePrefix
Type: SimpleString
Default:
XML name: expiry-queue-prefix
Description:
addressSettings.<address>.defaultConsumerWindowSize
Type: int
Default:
XML name: default-consumer-window-size
Description:
addressSettings.<address>.maxReadPageBytes
Type: int
Default:
XML name: max-read-page-bytes
Description:
addressSettings.<address>.deadLetterQueuePrefix
Type: SimpleString
Default:
XML name: dead-letter-queue-prefix
Description:
addressSettings.<address>.defaultGroupRebalancePauseDispatch
Type: boolean
Default:
XML name: default-group-rebalance-pause-dispatch
Description:
addressSettings.<address>.autoCreateAddresses
Type: Boolean
Default:
XML name: auto-create-addresses
Description:
addressSettings.<address>.slowConsumerThreshold
Type: long
Default:
XML name: slow-consumer-threshold
Description:
addressSettings.<address>.managementMessageAttributeSizeLimit
Type: int
Default:
XML name: management-message-attribute-size-limit
Description:
addressSettings.<address>.autoCreateExpiryResources
Type: boolean
Default:
XML name: auto-create-expiry-resources
Description:
addressSettings.<address>.pageSizeBytes
Type: int
Default:
XML name: page-size-bytes
Description:
addressSettings.<address>.minExpiryDelay
Type: Long
Default:
XML name: min-expiry-delay
Description:
addressSettings.<address>.defaultConsumersBeforeDispatch
Type: Integer
Default:
XML name: default-consumers-before-dispatch
Description:
addressSettings.<address>.expiryQueueSuffix
Type: SimpleString
Default:
XML name: expiry-queue-suffix
Description:
addressSettings.<address>.configDeleteQueues
Type: DeletionPolicy( OFF FORCE )
Default:
XML name: config-delete-queues
Description:
addressSettings.<address>.enableIngressTimestamp
Type: boolean
Default:
XML name: enable-ingress-timestamp
Description:
addressSettings.<address>.autoDeleteCreatedQueues
Type: Boolean
Default:
XML name: auto-delete-created-queues
Description:
addressSettings.<address>.expiryAddress
Type: SimpleString
Default:
XML name: expiry-address
Description:
addressSettings.<address>.managementBrowsePageSize
Type: int
Default:
XML name: management-browse-page-size
Description:
addressSettings.<address>.autoDeleteQueues
Type: Boolean
Default:
XML name: auto-delete-queues
Description:
addressSettings.<address>.retroactiveMessageCount
Type: long
Default:
XML name: retroactive-message-count
Description:
addressSettings.<address>.maxExpiryDelay
Type: Long
Default:
XML name: max-expiry-delay
Description:
addressSettings.<address>.maxDeliveryAttempts
Type: int
Default:
XML name: max-delivery-attempts
Description:
addressSettings.<address>.defaultGroupFirstKey
Type: SimpleString
Default:
XML name: default-group-first-key
Description:
addressSettings.<address>.slowConsumerCheckPeriod
Type: long
Default:
XML name: slow-consumer-check-period
Description:
addressSettings.<address>.defaultPurgeOnNoConsumers
Type: Boolean
Default:
XML name: default-purge-on-no-consumers
Description:
addressSettings.<address>.defaultLastValueKey
Type: SimpleString
Default:
XML name: default-last-value-key
Description:
addressSettings.<address>.autoCreateQueues
Type: Boolean
Default:
XML name: auto-create-queues
Description:
addressSettings.<address>.defaultExclusiveQueue
Type: Boolean
Default:
XML name: default-exclusive-queue
Description:
addressSettings.<address>.defaultMaxConsumers
Type: Integer
Default:
XML name: default-max-consumers
Description:
addressSettings.<address>.defaultQueueRoutingType
Type: RoutingType( MULTICAST ANYCAST )
Default:
XML name: default-queue-routing-type
Description:
addressSettings.<address>.messageCounterHistoryDayLimit
Type: int
Default:
XML name: message-counter-history-day-limit
Description:
addressSettings.<address>.defaultGroupRebalance
Type: boolean
Default:
XML name: default-group-rebalance
Description:
addressSettings.<address>.defaultAddressRoutingType
Type: RoutingType( MULTICAST ANYCAST )
Default:
XML name: default-address-routing-type
Description:
addressSettings.<address>.maxSizeBytesRejectThreshold
Type: long
Default:
XML name: max-size-bytes-reject-threshold
Description:
addressSettings.<address>.pageCacheMaxSize
Type: int
Default:
XML name: page-cache-max-size
Description:
addressSettings.<address>.autoCreateDeadLetterResources
Type: boolean
Default:
XML name: auto-create-dead-letter-resources
Description:
addressSettings.<address>.maxRedeliveryDelay
Type: long
Default:
XML name: max-redelivery-delay
Description:
addressSettings.<address>.configDeleteAddresses
Type: DeletionPolicy
Default:
XML name: config-delete-addresses
Description:
addressSettings.<address>.deadLetterAddress
Type: SimpleString
Default:
XML name: dead-letter-address
Description:
addressSettings.<address>.autoDeleteQueuesMessageCount
Type: long
Default:
XML name: auto-delete-queues-message-count
Description:
addressSettings.<address>.autoDeleteAddresses
Type: Boolean
Default:
XML name: auto-delete-addresses
Description:
addressSettings.<address>.addressFullMessagePolicy
Type: AddressFullMessagePolicy
Default:
XML name: address-full-message-policy
Description:
addressSettings.<address>.maxSizeBytes
Type: long
Default:
XML name: max-size-bytes
Description:
addressSettings.<address>.defaultDelayBeforeDispatch
Type: Long
Default:
XML name: default-delay-before-dispatch
Description:
addressSettings.<address>.redistributionDelay
Type: long
Default:
XML name: redistribution-delay
Description:
addressSettings.<address>.maxSizeMessages
Type: long
Default:
XML name: max-size-messages
Description:
addressSettings.<address>.redeliveryMultiplier
Type: double
Default:
XML name: redelivery-multiplier
Description:
addressSettings.<address>.defaultRingSize
Type: long
Default:
XML name: default-ring-size
Description:
addressSettings.<address>.defaultLastValueQueue
Type: boolean
Default:
XML name: default-last-value-queue
Description:
addressSettings.<address>.slowConsumerPolicy
Type: SlowConsumerPolicy( KILL NOTIFY )
Default:
XML name: slow-consumer-policy
Description:
addressSettings.<address>.redeliveryCollisionAvoidanceFactor
Type: double
Default:
XML name: redelivery-collision-avoidance-factor
Description:
addressSettings.<address>.autoDeleteQueuesDelay
Type: long
Default:
XML name: auto-delete-queues-delay
Description:
addressSettings.<address>.autoDeleteAddressesDelay
Type: long
Default:
XML name: auto-delete-addresses-delay
Description:
addressSettings.<address>.expiryDelay
Type: Long
Default:
XML name: expiry-delay
Description:
addressSettings.<address>.enableMetrics
Type: boolean
Default:
XML name: enable-metrics
Description:
addressSettings.<address>.sendToDLAOnNoRoute
Type: boolean
Default:
XML name: send-to-d-l-a-on-no-route
Description:
addressSettings.<address>.slowConsumerThresholdMeasurementUnit
Type: SlowConsumerThresholdMeasurementUnit( MESSAGES_PER_SECOND MESSAGES_PER_MINUTE MESSAGES_PER_HOUR MESSAGES_PER_DAY )
Default:
XML name: slow-consumer-threshold-measurement-unit
Description:
addressSettings.<address>.redeliveryDelay
Type: long
Default:
XML name: redelivery-delay
Description:
addressSettings.<address>.deadLetterQueueSuffix
Type: SimpleString
Default:
XML name: dead-letter-queue-suffix
Description:
addressSettings.<address>.defaultNonDestructive
Type: boolean
Default:
XML name: default-non-destructive
Description:
G.5. federationConfigurations
federationConfigurations.<name>.transformerConfigurations
Type: FederationTransformerConfiguration
Default:
XML name: transformer
Description: Optional transformer configuration.
federationConfigurations.<name>.transformerConfigurations.<name>.transformerConfiguration
Type: TransformerConfiguration
Default:
XML name: transformer
Description: Allows the addition of a custom transformer to amend the message.
federationConfigurations.<name>.transformerConfigurations.<name>.transformerConfiguration.<name>.className
Type: String
Default:
XML name: class-name
Description: The class name of the Transformer implementation.
federationConfigurations.<name>.transformerConfigurations.<name>.transformerConfiguration.<name>.properties
Type: Map
Default:
XML name: property
Description: A KEY/VALUE pair to set on the transformer, for example, …properties.MY_PROPERTY=MY_VALUE.
federationConfigurations.<name>.queuePolicies
Type: FederationQueuePolicyConfiguration
Default:
XML name: queue-policy
Description:
federationConfigurations.<name>.queuePolicies.<name>.priorityAdjustment
Type: Integer
Default:
XML name: priority-adjustment
Description: When a consumer attaches, its priority is used to create the upstream consumer, but with an adjustment so that local consumers are load balanced before remote consumers.
federationConfigurations.<name>.queuePolicies.<name>.excludes
Type: Matcher
Default:
XML name: exclude
Description: A list of queue matches to exclude.
federationConfigurations.<name>.queuePolicies.<name>.excludes.<name>.queueMatch
Type: String
Default:
XML name: queue-match
Description: A queue match pattern to apply. If none are present, all queues are matched.
federationConfigurations.<name>.queuePolicies.<name>.transformerRef
Type: String
Default:
XML name: transformer-ref
Description: The ref name for a transformer that you want to configure to transform the message on federation transfer.
federationConfigurations.<name>.queuePolicies.<name>.includes
Type: Matcher
Default:
XML name: queue-match
Description:
federationConfigurations.<name>.queuePolicies.<name>.excludes.<name>.queueMatch
Type: String
Default:
XML name: queue-match
Description: A queue match pattern to apply. If none are present, all queues are matched.
federationConfigurations.<name>.queuePolicies.<name>.includeFederated
Type: boolean
Default:
XML name: include-federated
Description: When the value is set to false, the configuration does not re-federate an already-federated consumer,that is, a consumer on a federated queue. This avoids a situation where, in a symmetric or closed-loop topology, there are no non-federated consumers and messages flow endlessly around the system.
federationConfigurations.<name>.upstreamConfigurations
Type: FederationUpstreamConfiguration
Default:
XML name: upstream
Description:
federationConfigurations.<name>.upstreamConfigurations.<name>.connectionConfiguration
Type: FederationConnectionConfiguration
Default:
XML name: connection-configuration
Description: The streams connection configuration.
federationConfigurations.<name>.upstreamConfigurations.<name>.connectionConfiguration.priorityAdjustment
Type: int
Default:
XML name: priority-adjustment
Description:
federationConfigurations.<name>.upstreamConfigurations.<name>.connectionConfiguration.retryIntervalMultiplier
Type: double
Default: 1
XML name: retry-interval-multiplier
Description: The multiplier to apply to the retry-interval.
federationConfigurations.<name>.upstreamConfigurations.<name>.connectionConfiguration.shareConnection
Type: boolean
Default: false
XML name: share-connection
Description: If set to true, the same connection is shared if there is a downstream and upstream connection configured for the same broker.
federationConfigurations.<name>.upstreamConfigurations.<name>.connectionConfiguration.maxRetryInterval
Type: long
Default: 2000
XML name: max-retry-interval
Description: The maximum value for retry-interval.
federationConfigurations.<name>.upstreamConfigurations.<name>.connectionConfiguration.connectionTTL
Type: long
Default:
XML name: connection-t-t-l
Description:
federationConfigurations.<name>.upstreamConfigurations.<name>.connectionConfiguration.circuitBreakerTimeout
Type: long
Default: 30000
XML name: circuit-breaker-timeout
Description: Specifies if this connection supports fail-over.
federationConfigurations.<name>.upstreamConfigurations.<name>.connectionConfiguration.callTimeout
Type: long
Default: 30000
XML name: call-timeout
Description: The duration to wait for a reply.
federationConfigurations.<name>.upstreamConfigurations.<name>.connectionConfiguration.staticConnectors
Type: List
Default:
XML name: static-connectors
Description: A list of connector references configured via connectors.
federationConfigurations.<name>.upstreamConfigurations.<name>.connectionConfiguration.reconnectAttempts
Type: int
Default: -1
XML name: reconnect-attempts
Description: The number of reconnection attempts after a failure.
federationConfigurations.<name>.upstreamConfigurations.<name>.connectionConfiguration.password
Type: String
Default:
XML name: password
Description: A password. If not specified, the federated password is used.
federationConfigurations.<name>.upstreamConfigurations.<name>.connectionConfiguration.callFailoverTimeout
Type: long
Default: -1
XML name: call-failover-timeout
Description: The duration to wait for a reply during a fail-over. A value of -1 means there is no limit.
federationConfigurations.<name>.upstreamConfigurations.<name>.connectionConfiguration.hA
Type: boolean
Default:
XML name: h-a
Description:
federationConfigurations.<name>.upstreamConfigurations.<name>.connectionConfiguration.initialConnectAttempts
Type: int
Default: -1
XML name: initial-connect-attempts
Description: The number of initial attempts to connect.
federationConfigurations.<name>.upstreamConfigurations.<name>.connectionConfiguration.retryInterval
Type: long
Default: 500
XML name: retry-interval
Description: The interval, in milliseconds, between successive retries.
federationConfigurations.<name>.upstreamConfigurations.<name>.connectionConfiguration.clientFailureCheckPeriod
Type: long
Default:
XML name: client-failure-check-period
Description:
federationConfigurations.<name>.upstreamConfigurations.<name>.connectionConfiguration.username
Type: String
Default:
XML name: username
Description:
federationConfigurations.<name>.upstreamConfigurations.<name>.policyRefs
Type: Collection
Default:
XML name: policy-refs
Description:
federationConfigurations.<name>.upstreamConfigurations.<name>.staticConnectors
Type: List
Default:
XML name: static-connectors
Description: A list of connector references configured via connectors.
federationConfigurations.<name>.downstreamConfigurations
Type: FederationDownstreamConfiguration
Default:
XML name: downstream
Description:
federationConfigurations.<name>.downstreamConfigurations.<name>.connectionConfiguration
Type: FederationConnectionConfiguration
Default:
XML name: connection-configuration
Description: The streams connection configuration.
federationConfigurations.<name>.downstreamConfigurations.<name>.connectionConfiguration.priorityAdjustment
Type: int
Default:
XML name: priority-adjustment
Description:
federationConfigurations.<name>.downstreamConfigurations.<name>.connectionConfiguration.retryIntervalMultiplier
Type: double
Default: 1
XML name: retry-interval-multiplier
Description: The multiplier to apply to the retry-interval.
federationConfigurations.<name>.downstreamConfigurations.<name>.connectionConfiguration.shareConnection
Type: boolean
Default: false
XML name: share-connection
Description: If set to true, the same connection is shared if there is a downstream and upstream connection configured for the same broker.
federationConfigurations.<name>.downstreamConfigurations.<name>.connectionConfiguration.maxRetryInterval
Type: long
Default: 2000
XML name: max-retry-interval
Description: The maximum value for the retry-interval.
federationConfigurations.<name>.downstreamConfigurations.<name>.connectionConfiguration.connectionTTL
Type: long
Default:
XML name: connection-t-t-l
Description:
federationConfigurations.<name>.downstreamConfigurations.<name>.connectionConfiguration.circuitBreakerTimeout
Type: long
Default: 30000
XML name: circuit-breaker-timeout
Description: Specifies whether this connection supports fail-over.
federationConfigurations.<name>.downstreamConfigurations.<name>.connectionConfiguration.callTimeout
Type: long
Default: 30000
XML name: call-timeout
Description: The duration to wait for a reply.
federationConfigurations.<name>.downstreamConfigurations.<name>.connectionConfiguration.staticConnectors
Type: List
Default:
XML name: static-connectors
Description: A list of connector references configured via connectors.
federationConfigurations.<name>.downstreamConfigurations.<name>.connectionConfiguration.reconnectAttempts
Type: int
Default: -1
XML name: reconnect-attempts
Description: The number of reconnection attempts after a failure.
federationConfigurations.<name>.downstreamConfigurations.<name>.connectionConfiguration.password
Type: String
Default:
XML name: password
Description: A password. If not specified, the federated password is used.
federationConfigurations.<name>.downstreamConfigurations.<name>.connectionConfiguration.callFailoverTimeout
Type: long
Default: -1
XML name: call-failover-timeout
Description: The duration to wait for a reply during a fail-over. A value of -1 means there is no limit.
federationConfigurations.<name>.downstreamConfigurations.<name>.connectionConfiguration.hA
Type: boolean
Default:
XML name: h-a
Description:
federationConfigurations.<name>.downstreamConfigurations.<name>.connectionConfiguration.initialConnectAttempts
Type: int
Default: -1
XML name: initial-connect-attempts
Description: The number of initial attempts to connect.
federationConfigurations.<name>.downstreamConfigurations.<name>.connectionConfiguration.retryInterval
Type: long
Default: 500
XML name: retry-interval
Description: The period, in milliseconds, between successive retries.
federationConfigurations.<name>.downstreamConfigurations.<name>.connectionConfiguration.clientFailureCheckPeriod
Type: long
Default:
XML name: client-failure-check-period
Description:
federationConfigurations.<name>.downstreamConfigurations.<name>.connectionConfiguration.username
Type: String
Default:
XML name: username
Description:
federationConfigurations.<name>.downstreamConfigurations.<name>.policyRefs
Type: Collection
Default:
XML name: policy-refs
Description:
federationConfigurations.<name>.downstreamConfigurations.<name>.staticConnectors
Type: List
Default:
XML name: static-connectors
Description: A list of connector references configured via connectors.
federationConfigurations.<name>.federationPolicys
Type: FederationPolicy
Default:
XML name: policy-set
Description:
federationConfigurations.<name>.addressPolicies
Type: FederationAddressPolicyConfiguration
Default:
XML name: address-policy
Description:
federationConfigurations.<name>.addressPolicies.<name>.autoDeleteMessageCount
Type: Long
Default:
XML name: auto-delete-message-count
Description: The maximum number of messages that can still be in a dynamically-created remote queue before that queue is eligible to be automatically deleted.
federationConfigurations.<name>.addressPolicies.<name>.enableDivertBindings
Type: Boolean
Default:
XML name: enable-divert-bindings
Description: Setting to true enables divert bindings to be listened-to for demand. If there is a divert binding with an address that matches the included addresses for the address policy, then any queue bindings that match the forwarding address of the divert will create demand. The default value is false.
federationConfigurations.<name>.addressPolicies.<name>.includes.{NAME}.addressMatch
Type: Matcher
Default:
XML name: include
Description:
federationConfigurations.<name>.addressPolicies.<name>.maxHops
Type: int
Default:
XML name: max-hops
Description: The number of hops that a message can make for it to be federated.
federationConfigurations.<name>.addressPolicies.<name>.transformerRef
Type: String
Default:
XML name: transformer-ref
Description: The ref name for a transformer that you want to configure to transform the message on federation transfer.
federationConfigurations.<name>.addressPolicies.<name>.autoDeleteDelay
Type: Long
Default:
XML name: auto-delete-delay
Description: The duration, in milliseconds, after the downstream broker disconnects before the upstream queue can be automatically deleted.
federationConfigurations.<name>.addressPolicies.<name>.autoDelete
Type: Boolean
Default:
XML name: auto-delete
Description: For address federation, the downstream dynamically creates a durable queue on the upstream address. Specifies if the upstream queue is deleted once the downstream disconnects and the delay and message count parameters are met.
federationConfigurations.<name>.addressPolicies.<name>.excludes.{NAME}.addressMatch
Type: Matcher
Default:
XML name: include
Description:
G.6. clusterConfigurations
clusterConfigurations.<name>.retryIntervalMultiplier
Type: double
Default: 1
XML name: retry-interval-multiplier
Description: The multiplier to apply to the retry-interval.
clusterConfigurations.<name>.maxRetryInterval
Type: long
Default: 2000
XML name: max-retry-interval
Description: The maximum value for retry-interval.
clusterConfigurations.<name>.address
Type: String
Default:
XML name: address
Description: The name of the address to which this cluster connection applies.
clusterConfigurations.<name>.maxHops
Type: int
Default: 1
XML name: max-hops
Description: The maximum number of hops to which the cluster topology is propagated.
clusterConfigurations.<name>.connectionTTL
Type: long
Default: 60000
XML name: connection-ttl
Description: The duration to keep a connection alive if no data is received from the client.
clusterConfigurations.<name>.clusterNotificationInterval
Type: long
Default: 1000
XML name: notification-interval
Description: The interval at which the cluster connection notifies the cluster of its existence.
clusterConfigurations.<name>.confirmationWindowSize
Type: int
Default: 1048576
XML name: confirmation-window-size
Description: The size, in bytes, of the window used for confirming data from the server. Supports byte notation, for example, "K", "Mb", "MiB", "GB".
clusterConfigurations.<name>.callTimeout
Type: long
Default: 30000
XML name: call-timeout
Description: The duration to wait for a reply.
clusterConfigurations.<name>.staticConnectors
Type: List
Default:
XML name: static-connectors
Description: A list of connectors references names.
clusterConfigurations.<name>.clusterNotificationAttempts
Type: int
Default: 2
XML name: notification-attempts
Description: The number of times this cluster connection attempts to notify the cluster of its existence.
clusterConfigurations.<name>.allowDirectConnectionsOnly
Type: boolean
Default: false
XML name: allow-direct-connections-only
Description: Restricts cluster connections to the listed connector-refs.
clusterConfigurations.<name>.reconnectAttempts
Type: int
Default: -1
XML name: reconnect-attempts
Description: The number of reconnection attempts after a failure.
clusterConfigurations.<name>.duplicateDetection
Type: boolean
Default: true
XML name: use-duplicate-detection
Description: Specifies if duplicate detection headers are inserted in forwarded messages.
clusterConfigurations.<name>.callFailoverTimeout
Type: long
Default: -1
XML name: call-failover-timeout
Description: The duration to wait for a reply during a fail-over. A value of -1 means there is no limit.
clusterConfigurations.<name>.messageLoadBalancingType
Type: MessageLoadBalancingType( OFF STRICT ON_DEMAND OFF_WITH_REDISTRIBUTION )
Default:
XML name: message-load-balancing-type
Description:
clusterConfigurations.<name>.initialConnectAttempts
Type: int
Default: -1
XML name: initial-connect-attempts
Description: The number of initial attempts to connect.
clusterConfigurations.<name>.connectorName
Type: String
Default:
XML name: connector-ref
Description: The name of the connector reference to use.
clusterConfigurations.<name>.retryInterval
Type: long
Default: 500
XML name: retry-interval
Description: The interval, in milliseconds, between successive retries.
clusterConfigurations.<name>.producerWindowSize
Type: int
Default: 1048576
XML name: producer-window-size
Description: Producer flow control. Supports byte notation, for example, "K", "Mb", "MiB", "GB".
clusterConfigurations.<name>.clientFailureCheckPeriod
Type: long
Default:
XML name: client-failure-check-period
Description:
clusterConfigurations.<name>.discoveryGroupName
Type: String
Default:
XML name: discovery-group-name
Description: The name of the discovery group used by this cluster-connection.
clusterConfigurations.<name>.minLargeMessageSize
Type: int
Default:
XML name: min-large-message-size
Description: The size, in bytes, above which a message is considered a large message. Large messages are sent over the network in multiple segments. Supports byte notation, for example, "K", "Mb", "MiB", "GB".
G.7. connectionRouters
connectionRouters.<name>.cacheConfiguration
Type: CacheConfiguration
Default:
XML name: cache
Description: Controls if the cache entries are persisted and how often a cache removes its entries.
connectionRouters.<name>.cacheConfiguration.persisted
Type: boolean
Default: false
XML name: persisted
Description: A value of true means that the cache entries are persisted.
connectionRouters.<name>.cacheConfiguration.timeout
Type: int
Default: -1
XML name: timeout
Description: The timeout, in milliseconds, before cache entries are removed.
connectionRouters.<name>.keyFilter
Type: String
Default:
XML name: key-filter
Description: A filter for the target key.
connectionRouters.<name>.keyType
Type: KeyType( CLIENT_ID SNI_HOST SOURCE_IP USER_NAME ROLE_NAME )
Default:
XML name: key-type
Description: The optional target key.
connectionRouters.<name>.localTargetFilter
Type: String
Default:
XML name: local-target-filter
Description: A filter to find the local target.
connectionRouters.<name>.poolConfiguration
Type: PoolConfiguration
Default:
XML name: pool
Description: The pool configuration.
connectionRouters.<name>.poolConfiguration.quorumTimeout
Type: int
Default: 3000
XML name: quorum-timeout
Description: The timeout, in milliseconds, used to get the minimum number of ready targets.
connectionRouters.<name>.poolConfiguration.password
Type: String
Default:
XML name: password
Description: The password to access the targets.
connectionRouters.<name>.poolConfiguration.localTargetEnabled
Type: boolean
Default: false
XML name: local-target-enabled
Description: A value of true means that the local target is enabled.
connectionRouters.<name>.poolConfiguration.checkPeriod
Type: int
Default: 5000
XML name: check-period
Description: The period, in milliseconds, used to check if a target is ready.
connectionRouters.<name>.poolConfiguration.quorumSize
Type: int
Default: 1
XML name: quorum-size
Description: The minimum number of ready targets.
connectionRouters.<name>.poolConfiguration.staticConnectors
Type: List
Default:
XML name: static-connectors
Description: A list of connector references configured via connectors.
connectionRouters.<name>.poolConfiguration.discoveryGroupName
Type: String
Default:
XML name: discovery-group-name
Description: The name of a discovery group used by this bridge.
connectionRouters.<name>.poolConfiguration.clusterConnection
Type: String
Default:
XML name: cluster-connection
Description: The name of a cluster connection.
connectionRouters.<name>.poolConfiguration.username
Type: String
Default:
XML name: username
Description: The username to access the targets.
connectionRouters.<name>.policyConfiguration
Type: NamedPropertyConfiguration
Default:
XML name: policy-configuration
Description:
connectionRouters.<name>..properties.{PROPERTY}
Type: Properties
Default:
XML name: property
Description: A set of Key value pairs specific to each named property.
Revised on 2024-06-10 15:29:14 UTC
