Buscar
ApoyoConsolaDesarrolladoresIniciar una pruebaContacto

Este contenido no está disponible en el idioma seleccionado.

3.3. Using the IPA Web UI

download PDF
In order to use the web UI, the user must be authenticated with the IPA Kerberos domain and have an active Kerberos ticket (Section 3.2, “Logging into IPA”). Generally, the web UI can only be accessed from an IPA server or client machine and the user must be locally authenticated. There are a couple of ways to work around this, either by configuring Kerberos on a non-domain machine to connect to the Kerberos domain (Section 3.3.4, “Using a Browser on Another System”) or by enabling password authentication to the UI (Section 3.3.5, “Enabling Username/Password Authentication in Your Browser”).

3.3.1. Supported Web Browsers

The only supported browser to access the IPA web UI is Firefox 3.x or 4.x.

3.3.2. Opening the IPA Web UI

The browser must be properly configured, as described in Section 3.3.3, “Configuring the Browser”, to support Kerberos authentication so that the user can connect to the UI.
To open the web UI:
  1. Get a valid Kerberos ticket using kinit, as in Section 3.2, “Logging into IPA”.
  2. Open the IPA URL. The full URL is https://IPAserver-FQDN/ipa/ui, but this service is also accessed simply by opening https://IPAserver-FQDN. For example: 
    https://server.example.com
https://server.example.com/ipa/ui

3.3.3. Configuring the Browser

Firefox can use Kerberos credentials to authenticate to the IPA UI, but Kerberos negotiation needs to be configured to use the IPA domain. At the first log-in attempt, if Firefox has not been configured to support Kerberos authentication, then an error message appears.
Kerberos Authentication Error

Figure 3.10. Kerberos Authentication Error

If you see that error, then the IPA web UI can perform the required configuration:
  1. Click the follow these directions link.
  2. Click the link to import the CA certificate for the IPA server.
  3. Set the web site and software developer (first and last) trust bits for the CA certificate.
  4. Click the Configure Firefox button. This automatically fills out all the negotiate settings in the Firefox configuration to use the IPA domain settings.
    When the process is complete, a success box pops up saying that Firefox has been configured for single sign-on. For there, you are redirected to the IPA web UI.
This can also be done manually:
  1. Open Firefox.
  2. Type about:config in the address bar.
  3. In the Search field, type negotiate to filter out the Kerberos-related parameters.
  4. On Red Hat Enterprise Linux, enter the domain name for the URI parameters, including the preceding period (.) and set the gsslib parameter to true: 
    network.negotiate-auth.trusted-uris  .example.com
network.negotiate-auth.delegation-uris  .example.com
network.negotiate-auth.using-native-gsslib true
  5. Open the web UI by going to the fully-qualified domain name of the IPA server such as http://ipaserver.example.com. Make sure that you can open the web UI and that there are no Kerberos authentication errors.
  6. Next, download the IPA server's CA certificate from http://ipa.example.com/ipa/config/ca.crt.
  7. Select the first (Trust this CA to identify web sites) and third (Trust this CA to identify software developers) check boxes.

3.3.4. Using a Browser on Another System

It is possible to connect to the Identity Management web UI from a system which is not a member of the IPA domain. In this case, it is possible to specify an IPA-specific Kerberos configuration file on the external (non-IPA) machine before running kinit, and then the user can authenticate against the IPA server domain.
This is especially useful there are multiple realms or overlapping domains across your infrastructure.
  1. Copy the /etc/krb5.conf file from the IPA server. 
    # scp /etc/krb5.conf root@externalmachine.example.com:/etc/krb5_ipa.conf

    Warning

    Do not overwrite the existing krb5.conf file.
  2. On the external machine, set the terminal session to use the copied IPA Kerberos configuration file: 
    $ export KRB5_CONFIG=/etc/krb5_ipa.conf
  3. Configure Firefox on the external machine as in Section 3.3.3, “Configuring the Browser”.

3.3.5. Enabling Username/Password Authentication in Your Browser

If Kerberos authentication fails, then browser login also fails. That prevents access to the IPA web UI. Configuring username/password authentication for the UI allows users to log in even if there are problems with the Kerberos service.
  1. Open the ipa.conf file used by the Apache web service. 
    vim /etc/httpd/conf.d/ipa.conf
  2. In the <Location "/ipa"> location definition, change the KrbMethodK5Passwd attribute from off to on. 
    KrbMethodK5Passwd on
  3. Restart the httpd service: 
    # service httpd restart
When this is configured, the web UI prompts for an IPA username and password if it can't detect any Kerberos credentials.
IPA Password Prompt

Figure 3.11. IPA Password Prompt

Note

This must be configured on every IPA server in the domain.

3.3.6. Using the UI with Proxy Servers

Proxy servers can be used to access the web UI without any additional configuration in IPA.
Port forwarding is not supported with the IPA server. However, because it is possible to use proxy servers with IPA, an operation similar to port forwarding can be configured using proxy forwarding with OpenSSH and the SOCKS option. This is described in http://www.meadowy.org/~gotoh/ssh/openssh-socks.html.

3.3.7. Troubleshooting UI Connection Problems

If negotiate authentication is not working, turn on verbose logging for the authentication process to help diagnose the issue:
  1. Close all browser windows.
  2. In a terminal, set the new log levels for Firefox: 
    export NSPR_LOG_MODULES=negotiateauth:5
export NSPR_LOG_FILE=/tmp/moz.log
    This enables verbose logging and logs all information to /tmp/moz.log.
  3. Restart the browser from the same terminal window and attempt t .
Some of the common error messages and workarounds are in Table 3.2, “UI Error Log Messages”.
Table 3.2. UI Error Log Messages
Error Log Message Description and Fix 
-1208550944[90039d0]: entering nsNegotiateAuth::GetNextToken()
-1208550944[90039d0]: gss_init_sec_context() failed: Miscellaneous failure
No credentials cache found
 There are no Kerberos tickets. Run kinit. 
-1208994096[8d683d8]: entering nsAuthGSSAPI::GetNextToken()
-1208994096[8d683d8]: gss_init_sec_context() failed: Miscellaneous failure
Server not found in Kerberos database
 This can occur when you have successfully obtained Kerberos tickets but are still unable to authenticate to the UI. This indicates that there is a problem with the Kerberos configuration. The first place to check is the [domain_realm] section in the /etc/krb5.conf file. Make sure that the IPA Kerberos domain entry is correct and matches the configuration in the Firefox negotiation parameters. For example: 
.example.com = EXAMPLE.COM
example.com = EXAMPLE.COM
Nothing is in the log file. It is possible that you are behind a proxy which is removing the HTTP headers required for negotiate authentication. Try to connect to the server using HTTPS instead, which allows the request to pass through unmodified. Then check the log file again.
Red Hat logoGithubRedditYoutubeTwitter

Aprender

Pruebe, compre y venda

Comunidades

Acerca de la documentación de Red Hat

Ayudamos a los usuarios de Red Hat a innovar y alcanzar sus objetivos con nuestros productos y servicios con contenido en el que pueden confiar.

Hacer que el código abierto sea más inclusivo

Red Hat se compromete a reemplazar el lenguaje problemático en nuestro código, documentación y propiedades web. Para más detalles, consulte el Blog de Red Hat.

Acerca de Red Hat

Ofrecemos soluciones reforzadas que facilitan a las empresas trabajar en plataformas y entornos, desde el centro de datos central hasta el perímetro de la red.

© 2024 Red Hat, Inc.