Buscar

Este contenido no está disponible en el idioma seleccionado.

Chapter 3. Configuring certificates issued by ADCS for smart card authentication in IdM

download PDF

To configure smart card authentication in IdM for users whose certificates are issued by Active Directory (AD) certificate services:

  • Your deployment is based on cross-forest trust between Identity Management (IdM) and Active Directory (AD).
  • You want to allow smart card authentication for users whose accounts are stored in AD.
  • Certificates are created and stored in Active Directory Certificate Services (ADCS).

For an overview of smart card authentication, see Understanding smart card authentication.

Configuration is accomplished in the following steps:

Prerequisites

  • Identity Management (IdM) and Active Directory (AD) trust is installed

    For details, see Installing trust between IdM and AD.

  • Active Directory Certificate Services (ADCS) is installed and certificates for users are generated

3.1. Windows Server settings required for trust configuration and certificate usage

You must configure the following on the Windows Server:

  • Active Directory Certificate Services (ADCS) is installed
  • Certificate Authority is created
  • Optional: If you are using Certificate Authority Web Enrollment, the Internet Information Services (IIS) must be configured

Export the certificate:

  • Key must have 2048 bits or more
  • Include a private key
  • You will need a certificate in the following format: Personal Information Exchange — PKCS #12(.PFX)

    • Enable certificate privacy

3.2. Copying certificates from Active Directory using sftp

To be able to use smart card authetication, you need to copy the following certificate files:

  • A root CA certificate in the CER format: adcs-winserver-ca.cer on your IdM server.
  • A user certificate with a private key in the PFX format: aduser1.pfx on an IdM client.
Note

This procedure expects SSH access is allowed. If SSH is unavailable the user must copy the file from the AD Server to the IdM server and client.

Procedure

  1. Connect from the IdM server and copy the adcs-winserver-ca.cer root certificate to the IdM server:

    root@idmserver ~]# sftp Administrator@winserver.ad.example.com
    Administrator@winserver.ad.example.com's password:
    Connected to Administrator@winserver.ad.example.com.
    sftp> cd <Path to certificates>
    sftp> ls
    adcs-winserver-ca.cer    aduser1.pfx
    sftp>
    sftp> get adcs-winserver-ca.cer
    Fetching <Path to certificates>/adcs-winserver-ca.cer to adcs-winserver-ca.cer
    <Path to certificates>/adcs-winserver-ca.cer                 100%  1254    15KB/s 00:00
    sftp quit
  2. Connect from the IdM client and copy the aduser1.pfx user certificate to the client:

    [root@client1 ~]# sftp Administrator@winserver.ad.example.com
    Administrator@winserver.ad.example.com's password:
    Connected to Administrator@winserver.ad.example.com.
    sftp> cd /<Path to certificates>
    sftp> get aduser1.pfx
    Fetching <Path to certificates>/aduser1.pfx to aduser1.pfx
    <Path to certificates>/aduser1.pfx                 100%  1254    15KB/s 00:00
    sftp quit

Now the CA certificate is stored in the IdM server and the user certificates is stored on the client machine.

3.3. Configuring the IdM server and clients for smart card authentication using ADCS certificates

You must configure the IdM (Identity Management) server and clients to be able to use smart card authentication in the IdM environment. IdM includes the ipa-advise scripts which makes all necessary changes:

  • Install necessary packages
  • Configure IdM server and clients
  • Copy the CA certificates into the expected locations

You can run ipa-advise on your IdM server.

Follow this procedure to configure your server and clients for smart card authentication:

  • On an IdM server: Preparing the ipa-advise script to configure your IdM server for smart card authentication.
  • On an IdM server: Preparing the ipa-advise script to configure your IdM client for smart card authentication.
  • On an IdM server: Applying the the ipa-advise server script on the IdM server using the AD certificate.
  • Moving the client script to the IdM client machine.
  • On an IdM client: Applying the the ipa-advise client script on the IdM client using the AD certificate.

Prerequisites

  • The certificate has been copied to the IdM server.
  • Obtain the Kerberos ticket.
  • Log in as a user with administration rights.

Procedure

  1. On the IdM server, use the ipa-advise script for configuring a client:

    [root@idmserver ~]# ipa-advise config-client-for-smart-card-auth > sc_client.sh
  2. On the IdM server, use the ipa-advise script for configuring a server:

    [root@idmserver ~]# ipa-advise config-server-for-smart-card-auth > sc_server.sh
  3. On the IdM server, execute the script:

    [root@idmserver ~]# sh -x sc_server.sh adcs-winserver-ca.cer
    • It configures the IdM Apache HTTP Server.
    • It enables Public Key Cryptography for Initial Authentication in Kerberos (PKINIT) on the Key Distribution Center (KDC).
    • It configures the IdM Web UI to accept smart card authorization requests.
  4. Copy the sc_client.sh script to the client system:

    [root@idmserver ~]# scp sc_client.sh root@client1.idm.example.com:/root
    Password:
    sc_client.sh                  100%  2857   1.6MB/s   00:00
  5. Copy the Windows certificate to the client system:

    [root@idmserver ~]# scp adcs-winserver-ca.cer root@client1.idm.example.com:/root
    Password:
    adcs-winserver-ca.cer                 100%  1254   952.0KB/s   00:00
  6. On the client system, run the client script:

    [root@idmclient1 ~]# sh -x sc_client.sh adcs-winserver-ca.cer

The CA certificate is installed in the correct format on the IdM server and client systems and next step is to copy the user certificates onto the smart card itself.

3.4. Converting the PFX file

Before you store the PFX (PKCS#12) file into the smart card, you must:

  • Convert the file to the PEM format
  • Extract the private key and the certificate to two different files

Prerequisites

  • The PFX file is copied into the IdM client machine.

Procedure

  1. On the IdM client, into the PEM format:

    [root@idmclient1 ~]# openssl pkcs12 -in aduser1.pfx -out aduser1_cert_only.pem -clcerts -nodes
    Enter Import Password:
  2. Extract the key into the separate file:

    [root@idmclient1 ~]# openssl pkcs12 -in adduser1.pfx -nocerts -out adduser1.pem > aduser1.key
  3. Extract the public certificate into the separate file:

    [root@idmclient1 ~]# openssl pkcs12 -in adduser1.pfx -clcerts -nokeys -out aduser1_cert_only.pem > aduser1.crt

At this point, you can store the aduser1.key and aduser1.crt into the smart card.

3.5. Installing tools for managing and using smart cards

Prerequisites

  • The gnutls-utils package is installed.
  • The opensc package is installed.
  • The pcscd service is running.

Before you can configure your smart card, you must install the corresponding tools, which can generate certificates and start the pscd service.

Procedure

  1. Install the opensc and gnutls-utils packages:

    # yum -y install opensc gnutls-utils
  2. Start the pcscd service.

    # systemctl start pcscd

Verification

  • Verify that the pcscd service is up and running

    # systemctl status pcscd

3.6. Preparing your smart card and uploading your certificates and keys to your smart card

Follow this procedure to configure your smart card with the pkcs15-init tool, which helps you to configure:

  • Erasing your smart card
  • Setting new PINs and optional PIN Unblocking Keys (PUKs)
  • Creating a new slot on the smart card
  • Storing the certificate, private key, and public key in the slot
  • If required, locking the smart card settings as certain smart cards require this type of finalization
Note

The pkcs15-init tool may not work with all smart cards. You must use the tools that work with the smart card you are using.

Prerequisites

  • The opensc package, which includes the pkcs15-init tool, is installed.

    For more details, see Installing tools for managing and using smart cards.

  • The card is inserted in the reader and connected to the computer.
  • You have a private key, a public key, and a certificate to store on the smart card. In this procedure, testuser.key, testuserpublic.key, and testuser.crt are the names used for the private key, public key, and the certificate.
  • You have your current smart card user PIN and Security Officer PIN (SO-PIN).

Procedure

  1. Erase your smart card and authenticate yourself with your PIN:

    $ pkcs15-init --erase-card --use-default-transport-keys
    Using reader with a card: Reader name
    PIN [Security Officer PIN] required.
    Please enter PIN [Security Officer PIN]:

    The card has been erased.

  2. Initialize your smart card, set your user PIN and PUK, and your Security Officer PIN and PUK:

    $ pkcs15-init --create-pkcs15 --use-default-transport-keys \ --pin 963214 --puk 321478 --so-pin 65498714 --so-puk 784123
    Using reader with a card: Reader name

    The pcks15-init tool creates a new slot on the smart card.

  3. Set a label and the authentication ID for the slot:

    $ pkcs15-init --store-pin --label testuser \ --auth-id 01 --so-pin 65498714 --pin 963214 --puk 321478
    Using reader with a card: Reader name

    The label is set to a human-readable value, in this case, testuser. The auth-id must be two hexadecimal values, in this case it is set to 01.

  4. Store and label the private key in the new slot on the smart card:

    $ pkcs15-init --store-private-key testuser.key --label testuser_key \ --auth-id 01 --id 01 --pin 963214
    Using reader with a card: Reader name
    Note

    The value you specify for --id must be the same when storing your private key and storing your certificate in the next step. Specifying your own value for --id is recommended as otherwise a more complicated value is calculated by the tool.

  5. Store and label the certificate in the new slot on the smart card:

    $ pkcs15-init --store-certificate testuser.crt --label testuser_crt \ --auth-id 01 --id 01 --format pem --pin 963214
    Using reader with a card: Reader name
  6. Optional: Store and label the public key in the new slot on the smart card:

    $ pkcs15-init --store-public-key testuserpublic.key --label testuserpublic_key --auth-id 01 --id 01 --pin 963214
    Using reader with a card: Reader name
    Note

    If the public key corresponds to a private key or certificate, specify the same ID as the ID of the private key or certificate.

  7. Optional: Certain smart cards require you to finalize the card by locking the settings:

    $ pkcs15-init -F

    At this stage, your smart card includes the certificate, private key, and public key in the newly created slot. You have also created your user PIN and PUK and the Security Officer PIN and PUK.

3.7. Configuring timeouts in sssd.conf

Authentication with a smart card certificate might take longer than the default timeouts used by SSSD. Time out expiration can be caused by:

  • Slow reader
  • A forwarding form a physical device into a virtual environment
  • Too many certificates stored on the smart card
  • Slow response from the OCSP (Online Certificate Status Protocol) responder if OCSP is used to verify the certificates

In this case you can prolong the following timeouts in the sssd.conf file, for example, to 60 seconds:

  • p11_child_timeout
  • krb5_auth_timeout

Prerequisites

  • You must be logged in as root.

Procedure

  1. Open the sssd.conf file:

    [root@idmclient1 ~]# vim /etc/sssd/sssd.conf
  2. Change the value of p11_child_timeout:

    [pam]
    p11_child_timeout = 60
  3. Change the value of krb5_auth_timeout:

    [domain/IDM.EXAMPLE.COM]
    krb5_auth_timeout = 60
  4. Save the settings.

Now, the interaction with the smart card is allowed to run for 1 minute (60 seconds) before authentication will fail with a timeout.

3.8. Creating certificate mapping rules for smart card authentication

If you want to use one certificate for a user who has accounts in AD (Active Directory) and in IdM (Identity Management), you can create a certificate mapping rule on the IdM server.

After creating such a rule, the user is able to authenticate with their smart card in both domains.

For details about certificate mapping rules, see Certificate mapping rules for configuring authentication.

Red Hat logoGithubRedditYoutubeTwitter

Aprender

Pruebe, compre y venda

Comunidades

Acerca de la documentación de Red Hat

Ayudamos a los usuarios de Red Hat a innovar y alcanzar sus objetivos con nuestros productos y servicios con contenido en el que pueden confiar.

Hacer que el código abierto sea más inclusivo

Red Hat se compromete a reemplazar el lenguaje problemático en nuestro código, documentación y propiedades web. Para más detalles, consulte el Blog de Red Hat.

Acerca de Red Hat

Ofrecemos soluciones reforzadas que facilitan a las empresas trabajar en plataformas y entornos, desde el centro de datos central hasta el perímetro de la red.

© 2024 Red Hat, Inc.