Red Hat Summit Red Hat SummitApoyoConsolaDesarrolladoresIniciar una pruebaContacto

Este contenido no está disponible en el idioma seleccionado.

35.5. Occurrence Constraints

35.5.1. Schema Elements Supporting Occurrence Constraints
Copiar enlace

XML Schema allows you to specify the occurrence constraints on four of the XML Schema elements that make up a complex type definition:

35.5.2. Occurrence Constraints on the All Element
Copiar enlace

XML Schema
Copiar enlace

Complex types defined with the all element do not allow for multiple occurrences of the structure defined by the all element. You can, however, make the structure defined by the all element optional by setting its minOccurs attribute to 0.

Mapping to Java
Copiar enlace

Setting the all element's minOccurs attribute to 0 has no effect on the generated Java class.

35.5.3. Occurrence Constraints on the Choice Element
Copiar enlace

Overview
Copiar enlace

By default, the results of a choice element can only appear once in an instance of a complex type. You can change the number of times the element chosen to represent the structure defined by a choice element is allowed to appear using its minOccurs attribute and its mxOccurs attribute. Using these attributes you can specify that the choice type can occur zero to an unlimited number of times in an instance of a complex type. The element chosen for the choice type does not need to be the same for each occurrence of the type.

Using in XML Schema
Copiar enlace

The minOccurs attribute specifies the minimum number of times the choice type must appear. Its value can be any positive integer. Setting the minOccurs attribute to 0 specifies that the choice type does not need to appear inside an instance of the complex type.
The maxOccurs attribute specifies the maximum number of times the choice type can appear. Its value can be any non-zero, positive integer or unbounded. Setting the maxOccurs attribute to unbounded specifies that the choice type can appear an infinite number of times.
Example 35.18, “Choice Occurrence Constraints” shows the definition of a choice type, ClubEvent, with choice occurrence constraints. The choice type overall can be repeated 0 to unbounded times.

Example 35.18. Choice Occurrence Constraints

<complexType name="ClubEvent">
  <choice minOccurs="0" maxOccurs="unbounded">
    <element name="MemberName" type="xsd:string"/>
    <element name="GuestName" type="xsd:string"/>
  </choice>
</complexType>

Mapping to Java
Copiar enlace

Unlike single instance choice structures, XML Schema choice structures that can occur multiple times are mapped to a Java class with a single member variable. This single member variable is a List<T> object that holds all of the data for the multiple occurrences of the sequence. For example, if the sequence defined in Example 35.18, “Choice Occurrence Constraints” occurred two times, then the list would have two items.
The name of the Java class' member variable is derived by concatenating the names of the member elements. The element names are separated by Or and the first letter of the variable name is converted to lower case. For example, the member variable generated from Example 35.18, “Choice Occurrence Constraints” would be named memberNameOrGuestName.
The type of object stored in the list depends on the relationship between the types of the member elements. For example:
  • If the member elements are of the same type the generated list will contain JAXBElement<T> objects. The base type of the JAXBElement<T> objects is determined by the normal mapping of the member elements' type.
  • If the member elements are of different types and their Java representations implement a common interface, the list will contains objects of the common interface.
  • If the member elements are of different types and their Java representations extend a common base class, the list will contains objects of the common base class.
  • If none of the other conditions are met, the list will contain Object objects.
The generated Java class will only have a getter method for the member variable. The getter method returns a reference to the live list. Any modifications made to the returned list will effect the actual object.
The Java class is decorated with the @XmlType annotation. The annotation's name property is set to the value of the name attribute from the parent element of the XML Schema definition. The annotation's propOrder property contains the single member variable representing the elements in the sequence.
The member variable representing the elements in the choice structure are decorated with the @XmlElements annotation. The @XmlElements annotation contains a comma separated list of @XmlElement annotations. The list has one @XmlElement annotation for each member element defined in the XML Schema definition of the type. The @XmlElement annotations in the list have their name property set to the value of the XML Schema element element's name attribute and their type property set to the Java class resulting from the mapping of the XML Schema element element's type.
Example 35.19, “Java Representation of Choice Structure with an Occurrence Constraint” shows the Java mapping for the XML Schema choice structure defined in Example 35.18, “Choice Occurrence Constraints”.

Example 35.19. Java Representation of Choice Structure with an Occurrence Constraint

@XmlType(name = "ClubEvent", propOrder = {
    "memberNameOrGuestName"
})
public class ClubEvent {

    @XmlElementRefs({
        @XmlElementRef(name = "GuestName", type = JAXBElement.class),
        @XmlElementRef(name = "MemberName", type = JAXBElement.class)
    })
    protected List<JAXBElement<String>> memberNameOrGuestName;

    public List<JAXBElement<String>> getMemberNameOrGuestName() {
        if (memberNameOrGuestName == null) {
            memberNameOrGuestName = new ArrayList<JAXBElement<String>>();
        }
        return this.memberNameOrGuestName;
    }

}

minOccurs set to 0
Copiar enlace

If only the minOccurs element is specified and its value is 0, the code generators generate the Java class as if the minOccurs attribute were not set.

35.5.4. Occurrence Constraints on Elements
Copiar enlace

Overview
Copiar enlace

You can specify how many times a specific element in a complex type appears using the element element's minOccurs attribute and maxOccurs attribute. The default value for both attributes is 1.

minOccurs set to 0
Copiar enlace

When you set one of the complex type's member element's minOccurs attribute to 0, the @XmlElement annotation decorating the corresponding Java member variable is changed. Instead of having its required property set to true, the @XmlElement annotation's required property is set to false.

minOccurs set to a value greater than 1
Copiar enlace

In XML Schema you can specify that an element must occur more than once in an instance of the type by setting the element element's minOccurs attribute to a value greater than one. However, the generated Java class will not support the XML Schema constraint. Apache CXF generates the supporting Java member variable as if the minOccurs attribute were not set.

Elements with maxOccurs set
Copiar enlace

When you want a member element to appear multiple times in an instance of a complex type, you set the element's maxOccurs attribute to a value greater than 1. You can set the maxOccurs attribute's value to unbounded to specify that the member element can appear an unlimited number of times.
The code generators map a member element with the maxOccurs attribute set to a value greater than 1 to a Java member variable that is a List<T> object. The base class of the list is determined by mapping the element's type to Java. For XML Schema primitive types, the wrapper classes are used as described in the section called “Wrapper classes”. For example, if the member element is of type xsd:int the generated member variable is a List<Integer> object.

35.5.5. Occurrence Constraints on Sequences
Copiar enlace

Overview
Copiar enlace

By default, the contents of a sequence element can only appear once in an instance of a complex type. You can change the number of times the sequence of elements defined by a sequence element is allowed to appear using its minOccurs attribute and its maxOccurs attribute. Using these attributes you can specify that the sequence type can occur zero to an unlimited number of times in an instance of a complex type.

Using XML Schema
Copiar enlace

The minOccurs attribute specifies the minimum number of times the sequence must occur in an instance of the defined complex type. Its value can be any positive integer. Setting the minOccurs attribute to 0 specifies that the sequence does not need to appear inside an instance of the complex type.
The maxOccurs attribute specifies the upper limit for how many times the sequence can occur in an instance of the defined complex type. Its value can be any non-zero, positive integer or unbounded. Setting the maxOccurs attribute to unbounded specifies that the sequence can appear an infinite number of times.
Example 35.20, “Sequence with Occurrence Constraints” shows the definition of a sequence type, CultureInfo, with sequence occurrence constraints. The sequence can be repeated 0 to 2 times.

Example 35.20. Sequence with Occurrence Constraints

<complexType name="CultureInfo">
  <sequence minOccurs="0" maxOccurs="2">
    <element name="Name" type="string"/>
    <element name="Lcid" type="int"/>
  </sequence>
</complexType>

Mapping to Java
Copiar enlace

Unlike single instance sequences, XML Schema sequences that can occur multiple times are mapped to a Java class with a single member variable. This single member variable is a List<T> object that holds all of the data for the multiple occurrences of the sequence. For example, if the sequence defined in Example 35.20, “Sequence with Occurrence Constraints” occurred two times, then the list would have four items.
The name of the Java class' member variable is derived by concatenating the names of the member elements. The element names are separated by And and the first letter of the variable name is converted to lower case. For example, the member variable generated from Example 35.20, “Sequence with Occurrence Constraints” is named nameAndLcid.
The type of object stored in the list depends on the relationship between the types of the member elements. For example:
  • If the member elements are of the same type the generated list will contain JAXBElement<T> objects. The base type of the JAXBElement<T> objects is determined by the normal mapping of the member elements' type.
  • If the member elements are of different types and their Java representations implement a common interface, the list will contains objects of the common interface.
  • If the member elements are of different types and their Java representations extend a common base class, the list will contain objects of the common base class.
  • If none of the other conditions are met, the list will contain Object objects.
The generated Java class only has a getter method for the member variable. The getter method returns a reference to the live list. Any modifications made to the returned list effects the actual object.
The Java class is decorated with the @XmlType annotation. The annotation's name property is set to the value of the name attribute from the parent element of the XML Schema definition. The annotation's propOrder property contains the single member variable representing the elements in the sequence.
The member variable representing the elements in the sequence are decorated with the @XmlElements annotation. The @XmlElements annotation contains a comma separated list of @XmlElement annotations. The list has one @XmlElement annotation for each member element defined in the XML Schema definition of the type. The @XmlElement annotations in the list have their name property set to the value of the XML Schema element element's name attribute and their type property set to the Java class resulting from the mapping of the XML Schema element element's type.
Example 35.21, “Java Representation of Sequence with an Occurrence Constraint” shows the Java mapping for the XML Schema sequence defined in Example 35.20, “Sequence with Occurrence Constraints”.

Example 35.21. Java Representation of Sequence with an Occurrence Constraint

@XmlType(name = "CultureInfo", propOrder = {
    "nameAndLcid"
})
public class CultureInfo {

    @XmlElements({
        @XmlElement(name = "Name", type = String.class),
        @XmlElement(name = "Lcid", type = Integer.class)
    })
    protected List<Serializable> nameAndLcid;

    public List<Serializable> getNameAndLcid() {
        if (nameAndLcid == null) {
            nameAndLcid = new ArrayList<Serializable>();
        }
        return this.nameAndLcid;
    }

}

minOccurs set to 0
Copiar enlace

If only the minOccurs element is specified and its value is 0, the code generators generate the Java class as if the minOccurs attribute is not set.
Red Hat logoGithubredditYoutubeTwitter

Aprender

Pruebe, compre y venda

Comunidades

Acerca de la documentación de Red Hat

Ayudamos a los usuarios de Red Hat a innovar y alcanzar sus objetivos con nuestros productos y servicios con contenido en el que pueden confiar. Explore nuestras recientes actualizaciones.

Hacer que el código abierto sea más inclusivo

Red Hat se compromete a reemplazar el lenguaje problemático en nuestro código, documentación y propiedades web. Para más detalles, consulte el Blog de Red Hat.

Acerca de Red Hat

Ofrecemos soluciones reforzadas que facilitan a las empresas trabajar en plataformas y entornos, desde el centro de datos central hasta el perímetro de la red.

Theme

© 2026 Red HatVolver arriba