Red Hat Summit Red Hat SummitApoyoConsolaDesarrolladoresIniciar una pruebaContacto

Este contenido no está disponible en el idioma seleccionado.

Chapter 6. Address Volume Size Discrepancies with Dell EqualLogic Back Ends

When reporting volume sizes, Dell EqualLogic (EQL) back ends also account for additional storage to be used for internal volume metadata. This size will be slightly larger than the volume size reported by the Block Storage services. However, the volume size reported by an EQL back end is the same one used by the Image service.

As a result, when creating an image-backed volume on an EQL back end, check the size of the image first. If the image was originally volume-backed, then EQL (and, by extension, the Image service) will be reporting a volume size slightly larger than what is reported by the Block Storage service.

If the image size reported by EQL is slightly larger, then you need to take the size discrepancy into consideration when creating volumes backed by this image.

6.1. Example
Copiar enlace

To illustrate, when you create a 1GB volume:

# cinder create --display-name vol1 1 

+---------------------+--------------------------------------+
|       Property      |                Value                 |
+---------------------+--------------------------------------+
|     attachments     |                  []                  |
|  availability_zone  |                 nova                 |
|       bootable      |                false                 |
|      created_at     |      2014-12-19T03:57:47.730359      |
| display_description |                 None                 |
|     display_name    |                 vol1                 |
|      encrypted      |                False                 |
|          id         | 6bdace69-bd41-42fc-a63a-f834fb65a2e4 |
|       metadata      |                  {}                  |
|         size        |                  1                   |
|     snapshot_id     |                 None                 |
|     source_volid    |                 None                 |
|        status       |               creating               |
|     volume_type     |                 None                 |
+---------------------+--------------------------------------+
Copy to Clipboard Toggle word wrap

The Block Storage service will report a volume size of 1GB, but on the EQL array the size (VolReserve) will be slightly bigger:

eql> volume select volume-6bdace69-bd41-42fc-a63a-f834fb65a2e4

eql (volume-6bdace69-bd41-42fc-a63a-f834fb65a2e4)> show 

_______________________________ Volume Information ______...
Name: volume-6bdace69-bd41-42fc-a63a-f834fb65a2e4
Size: 1GB
VolReserve: 1.01GB
...
Copy to Clipboard Toggle word wrap

When you create a new image from this volume, cinder will report a correct volume size of 1GB:

# cinder upload-to-image --disk-format raw --container-format bare vol1 image_vol1 

+---------------------+--------------------------------------+
|       Property      |                Value                 |
+---------------------+--------------------------------------+
|   container_format  |                 bare                 |
|     disk_format     |                 raw                  |
| display_description |                 None                 |
|          id         | 6bdace69-bd41-42fc-a63a-f834fb65a2e4 |
|       image_id      | c65f7eae-e2c1-44ba-8af1-e33695897559 |
|      image_name     |              image_vol1              |
|         size        |                  1                   |
|        status       |              uploading               |
|      updated_at     |      2014-12-19T03:57:48.000000      |
|     volume_type     |                 None                 |
+---------------------+--------------------------------------+
Copy to Clipboard Toggle word wrap

However, the Image service will report a slightly larger size:

# glance image-list 

...+------------+-------------+------------------+------------+--------+
...| Name       | Disk Format | Container Format | Size       | Status |
...+------------+-------------+------------------+------------+--------+
...| image_vol1 | raw         | bare             | 1085276160 | active |
...+------------+-------------+------------------+------------+--------+
Copy to Clipboard Toggle word wrap

The glance tool reports an image size of approximately 1.01GB. As a result, creating a new 1GB volume backed by this image will fail:

# cinder create --display-name vol2 --image-id c65f7eae-e2c1-44ba-8af1-e33695897559 1 

ERROR: Invalid input received: Size of specified image 2 is larger than volume size 1
Copy to Clipboard Toggle word wrap

6.2. Workaround
Copiar enlace

As mentioned earlier, you need to consider the discrepancy between the volume sizes reported by the Image and the Block Storage services when specifying the size of image-backed volumes. This means that when specifying the size of the image-backed volume, use the next whole number after the image size reported by glance.

Using the previous example, glance reported an image size of 1.01GB. This means that when you create a volume, you need to specify a volume size of 2GB instead of 1GB:

# cinder create --display-name vol2 --image-id c65f7eae-e2c1-44ba-8af1-e33695897559 2 

+---------------------+--------------------------------------+
|       Property      |                Value                 |
+---------------------+--------------------------------------+
|     attachments     |                  []                  |
|  availability_zone  |                 nova                 |
|       bootable      |                false                 |
|      created_at     |      2014-12-19T04:54:07.036260      |
| display_description |                 None                 |
|     display_name    |                 vol2                 |
|      encrypted      |                False                 |
|          id         | fcf49715-094d-4bba-9f05-8b7fa6deffce |
|       image_id      | c65f7eae-e2c1-44ba-8af1-e33695897559 |
|       metadata      |                  {}                  |
|         size        |                  2                   |
|     snapshot_id     |                 None                 |
|     source_volid    |                 None                 |
|        status       |               creating               |
|     volume_type     |                 None                 |
+---------------------+--------------------------------------+
Copy to Clipboard Toggle word wrap
Volver arriba
Red Hat logoGithubredditYoutubeTwitter

Aprender

Pruebe, compre y venda

Comunidades

Acerca de la documentación de Red Hat

Ayudamos a los usuarios de Red Hat a innovar y alcanzar sus objetivos con nuestros productos y servicios con contenido en el que pueden confiar. Explore nuestras recientes actualizaciones.

Hacer que el código abierto sea más inclusivo

Red Hat se compromete a reemplazar el lenguaje problemático en nuestro código, documentación y propiedades web. Para más detalles, consulte el Blog de Red Hat.

Acerca de Red Hat

Ofrecemos soluciones reforzadas que facilitan a las empresas trabajar en plataformas y entornos, desde el centro de datos central hasta el perímetro de la red.

Theme

© 2025 Red Hat