Red Hat Summit Red Hat SummitApoyoConsolaDesarrolladoresIniciar una pruebaContacto

Este contenido no está disponible en el idioma seleccionado.

Chapter 5. address

This chapter describes the commands under the address command.

5.1. address group create
Copiar enlace

Create a new Address Group

Usage:

openstack address group create [-h] [-f {json,shell,table,value,yaml}]
                                      [-c COLUMN] [--noindent]
                                      [--prefix PREFIX]
                                      [--max-width <integer>] [--fit-width]
                                      [--print-empty]
                                      [--description <description>]
                                      [--address <ip-address>]
                                      [--project <project>]
                                      [--project-domain <project-domain>]
                                      <name>
Copy to Clipboard Toggle word wrap

Expand
Table 5.1. Positional arguments
ValueSummary

<name>

New address group name

Expand
Table 5.2. Command arguments
ValueSummary

-h, --help

Show this help message and exit

--description <description>

New address group description

--address <ip-address>

Ip address or cidr (repeat option to set multiple addresses)

--project <project>

Owner’s project (name or id)

--project-domain <project-domain>

Domain the project belongs to (name or id). this can be used in case collisions between project names exist.

Expand
Table 5.3. Output formatter options
ValueSummary

-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated to show multiple columns

Expand
Table 5.4. JSON formatter options
ValueSummary

--noindent

Whether to disable indenting the json

Expand
Table 5.5. Shell formatter options
ValueSummary

--prefix PREFIX

Add a prefix to all variable names

Expand
Table 5.6. Table formatter options
ValueSummary

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

5.2. address group delete
Copiar enlace

Delete address group(s)

Usage:

openstack address group delete [-h]
                                      <address-group> [<address-group> ...]
Copy to Clipboard Toggle word wrap

Expand
Table 5.7. Positional arguments
ValueSummary

<address-group>

Address group(s) to delete (name or id)

Expand
Table 5.8. Command arguments
ValueSummary

-h, --help

Show this help message and exit

5.3. address group list
Copiar enlace

List address groups

Usage:

openstack address group list [-h] [-f {csv,json,table,value,yaml}]
                                    [-c COLUMN]
                                    [--quote {all,minimal,none,nonnumeric}]
                                    [--noindent] [--max-width <integer>]
                                    [--fit-width] [--print-empty]
                                    [--sort-column SORT_COLUMN]
                                    [--sort-ascending | --sort-descending]
                                    [--name <name>] [--project <project>]
                                    [--project-domain <project-domain>]
Copy to Clipboard Toggle word wrap

Expand
Table 5.9. Command arguments
ValueSummary

-h, --help

Show this help message and exit

--name <name>

List only address groups of given name in output

--project <project>

List address groups according to their project (name or ID)

--project-domain <project-domain>

Domain the project belongs to (name or id). this can be used in case collisions between project names exist.

Expand
Table 5.10. Output formatter options
ValueSummary

-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated to show multiple columns

--sort-column SORT_COLUMN

Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated

--sort-ascending

Sort the column(s) in ascending order

--sort-descending

Sort the column(s) in descending order

Expand
Table 5.11. CSV formatter options
ValueSummary

--quote {all,minimal,none,nonnumeric}

When to include quotes, defaults to nonnumeric

Expand
Table 5.12. JSON formatter options
ValueSummary

--noindent

Whether to disable indenting the json

Expand
Table 5.13. Table formatter options
ValueSummary

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

5.4. address group set
Copiar enlace

Set address group properties

Usage:

openstack address group set [-h] [--name <name>]
                                   [--description <description>]
                                   [--address <ip-address>]
                                   <address-group>
Copy to Clipboard Toggle word wrap

Expand
Table 5.14. Positional arguments
ValueSummary

<address-group>

Address group to modify (name or id)

Expand
Table 5.15. Command arguments
ValueSummary

-h, --help

Show this help message and exit

--name <name>

Set address group name

--description <description>

Set address group description

--address <ip-address>

Ip address or cidr (repeat option to set multiple addresses)

5.5. address group show
Copiar enlace

Display address group details

Usage:

openstack address group show [-h] [-f {json,shell,table,value,yaml}]
                                    [-c COLUMN] [--noindent] [--prefix PREFIX]
                                    [--max-width <integer>] [--fit-width]
                                    [--print-empty]
                                    <address-group>
Copy to Clipboard Toggle word wrap

Expand
Table 5.16. Positional arguments
ValueSummary

<address-group>

Address group to display (name or id)

Expand
Table 5.17. Command arguments
ValueSummary

-h, --help

Show this help message and exit

Expand
Table 5.18. Output formatter options
ValueSummary

-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated to show multiple columns

Expand
Table 5.19. JSON formatter options
ValueSummary

--noindent

Whether to disable indenting the json

Expand
Table 5.20. Shell formatter options
ValueSummary

--prefix PREFIX

Add a prefix to all variable names

Expand
Table 5.21. Table formatter options
ValueSummary

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

5.6. address group unset
Copiar enlace

Unset address group properties

Usage:

openstack address group unset [-h] [--address <ip-address>]
                                     <address-group>
Copy to Clipboard Toggle word wrap

Expand
Table 5.22. Positional arguments
ValueSummary

<address-group>

Address group to modify (name or id)

Expand
Table 5.23. Command arguments
ValueSummary

-h, --help

Show this help message and exit

--address <ip-address>

Ip address or cidr (repeat option to unset multiple addresses)

5.7. address scope create
Copiar enlace

Create a new Address Scope

Usage:

openstack address scope create [-h] [-f {json,shell,table,value,yaml}]
                                      [-c COLUMN] [--noindent]
                                      [--prefix PREFIX]
                                      [--max-width <integer>] [--fit-width]
                                      [--print-empty] [--ip-version {4,6}]
                                      [--project <project>]
                                      [--project-domain <project-domain>]
                                      [--share | --no-share]
                                      <name>
Copy to Clipboard Toggle word wrap

Expand
Table 5.24. Positional arguments
ValueSummary

<name>

New address scope name

Expand
Table 5.25. Command arguments
ValueSummary

-h, --help

Show this help message and exit

--ip-version {4,6}

Ip version (default is 4)

--project <project>

Owner’s project (name or id)

--project-domain <project-domain>

Domain the project belongs to (name or id). this can be used in case collisions between project names exist.

--share

Share the address scope between projects

--no-share

Do not share the address scope between projects (default)

Expand
Table 5.26. Output formatter options
ValueSummary

-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated to show multiple columns

Expand
Table 5.27. JSON formatter options
ValueSummary

--noindent

Whether to disable indenting the json

Expand
Table 5.28. Shell formatter options
ValueSummary

--prefix PREFIX

Add a prefix to all variable names

Expand
Table 5.29. Table formatter options
ValueSummary

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

5.8. address scope delete
Copiar enlace

Delete address scope(s)

Usage:

openstack address scope delete [-h]
                                      <address-scope> [<address-scope> ...]
Copy to Clipboard Toggle word wrap

Expand
Table 5.30. Positional arguments
ValueSummary

<address-scope>

Address scope(s) to delete (name or id)

Expand
Table 5.31. Command arguments
ValueSummary

-h, --help

Show this help message and exit

5.9. address scope list
Copiar enlace

List address scopes

Usage:

openstack address scope list [-h] [-f {csv,json,table,value,yaml}]
                                    [-c COLUMN]
                                    [--quote {all,minimal,none,nonnumeric}]
                                    [--noindent] [--max-width <integer>]
                                    [--fit-width] [--print-empty]
                                    [--sort-column SORT_COLUMN]
                                    [--sort-ascending | --sort-descending]
                                    [--name <name>]
                                    [--ip-version <ip-version>]
                                    [--project <project>]
                                    [--project-domain <project-domain>]
                                    [--share | --no-share]
Copy to Clipboard Toggle word wrap

Expand
Table 5.32. Command arguments
ValueSummary

-h, --help

Show this help message and exit

--name <name>

List only address scopes of given name in output

--ip-version <ip-version>

List address scopes of given ip version networks (4 or 6)

--project <project>

List address scopes according to their project (name or ID)

--project-domain <project-domain>

Domain the project belongs to (name or id). this can be used in case collisions between project names exist.

--share

List address scopes shared between projects

--no-share

List address scopes not shared between projects

Expand
Table 5.33. Output formatter options
ValueSummary

-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated to show multiple columns

--sort-column SORT_COLUMN

Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated

--sort-ascending

Sort the column(s) in ascending order

--sort-descending

Sort the column(s) in descending order

Expand
Table 5.34. CSV formatter options
ValueSummary

--quote {all,minimal,none,nonnumeric}

When to include quotes, defaults to nonnumeric

Expand
Table 5.35. JSON formatter options
ValueSummary

--noindent

Whether to disable indenting the json

Expand
Table 5.36. Table formatter options
ValueSummary

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

5.10. address scope set
Copiar enlace

Set address scope properties

Usage:

openstack address scope set [-h] [--name <name>] [--share | --no-share]
                                   <address-scope>
Copy to Clipboard Toggle word wrap

Expand
Table 5.37. Positional arguments
ValueSummary

<address-scope>

Address scope to modify (name or id)

Expand
Table 5.38. Command arguments
ValueSummary

-h, --help

Show this help message and exit

--name <name>

Set address scope name

--share

Share the address scope between projects

--no-share

Do not share the address scope between projects

5.11. address scope show
Copiar enlace

Display address scope details

Usage:

openstack address scope show [-h] [-f {json,shell,table,value,yaml}]
                                    [-c COLUMN] [--noindent] [--prefix PREFIX]
                                    [--max-width <integer>] [--fit-width]
                                    [--print-empty]
                                    <address-scope>
Copy to Clipboard Toggle word wrap

Expand
Table 5.39. Positional arguments
ValueSummary

<address-scope>

Address scope to display (name or id)

Expand
Table 5.40. Command arguments
ValueSummary

-h, --help

Show this help message and exit

Expand
Table 5.41. Output formatter options
ValueSummary

-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated to show multiple columns

Expand
Table 5.42. JSON formatter options
ValueSummary

--noindent

Whether to disable indenting the json

Expand
Table 5.43. Shell formatter options
ValueSummary

--prefix PREFIX

Add a prefix to all variable names

Expand
Table 5.44. Table formatter options
ValueSummary

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

Volver arriba
Red Hat logoGithubredditYoutubeTwitter

Aprender

Pruebe, compre y venda

Comunidades

Acerca de la documentación de Red Hat

Ayudamos a los usuarios de Red Hat a innovar y alcanzar sus objetivos con nuestros productos y servicios con contenido en el que pueden confiar. Explore nuestras recientes actualizaciones.

Hacer que el código abierto sea más inclusivo

Red Hat se compromete a reemplazar el lenguaje problemático en nuestro código, documentación y propiedades web. Para más detalles, consulte el Blog de Red Hat.

Acerca de Red Hat

Ofrecemos soluciones reforzadas que facilitan a las empresas trabajar en plataformas y entornos, desde el centro de datos central hasta el perímetro de la red.

Theme

© 2025 Red Hat