Red Hat Summit Red Hat SummitApoyoConsolaDesarrolladoresIniciar una pruebaContacto

Este contenido no está disponible en el idioma seleccionado.

Chapter 2. Installing Satellite Server

You can use this chapter to find information about installing Red Hat Satellite Server, performing the initial configuration, creating and installing manifests, and performing additional configuration.

There are two methods of installing Satellite Server:

Connected:

You can obtain the packages required to install Satellite Server directly from the Red Hat Content Delivery Network (CDN). Using the CDN ensures that your system always receives the latest updates.

Disconnected:

You must use an external computer to download an ISO image of the packages and copy the packages to the system you want to install Satellite Server on. Use an ISO image only if you require a disconnected environment. The ISO image might not contain the latest updates.

Note

You cannot register Satellite Server to itself.

2.1. Installing Satellite Server from a Connected Network
Copiar enlace

When you install Satellite Server from a connected network, you can obtain packages and receive updates directly from the Red Hat Content Delivery Network.

Note that the Satellite 6 installation script is based on Puppet, which means that if you run the installation script more than once, it might overwrite any manual configuration changes. ⁠ To avoid this and determine which future changes apply, use the --noop argument when you run the installation script. This argument ensures that no actual changes are made. Potential changes are written to /var/log/foreman-installer.log.

Files are always backed up and so you can revert any unwanted changes. For example, in the foreman-installer logs, you can see an entry similar to the following about Filebucket: 

/Stage[main]/Dhcp/File[/etc/dhcp/dhcpd.conf]: Filebucketed /etc/dhcp/dhcpd.conf to puppet with sum 622d9820b8e764ab124367c68f5fa3a1
Copy to Clipboard Toggle word wrap

You can restore the previous file as follows: 

# puppet filebucket -l \
restore /etc/dhcp/dhcpd.conf 622d9820b8e764ab124367c68f5fa3a1
Copy to Clipboard Toggle word wrap

2.1.1. Registering to Red Hat Subscription Management
Copiar enlace

Registering the host to Red Hat Subscription Management enables the host to subscribe to and consume content for any subscriptions available to the user. This includes content such as Red Hat Enterprise Linux, Red Hat Software Collections (RHSCL), and Red Hat Satellite.

Register your system with the Red Hat Content Delivery Network, entering your Customer Portal user name and password when prompted: 

# subscription-manager register
Copy to Clipboard Toggle word wrap

The command displays output similar to the following: 

# subscription-manager register
Username: user_name
Password:
The system has been registered with ID: 541084ff2-44cab-4eb1-9fa1-7683431bcf9a
Copy to Clipboard Toggle word wrap

2.1.2. Attaching the Satellite Infrastructure Subscription
Copiar enlace

After you have registered Satellite Server, you must identify your subscription Pool ID and attach an available subscription. The Red Hat Satellite Infrastructure subscription provides access to the Red Hat Satellite, Red Hat Enterprise Linux, and Red Hat Software Collections (RHSCL) content. This is the only subscription required.

Red Hat Satellite Infrastructure is included with all subscriptions that include Smart Management. For more information, see the Red Hat Knowledgebase solution Satellite Infrastructure Subscriptions MCT3718 MCT3719.

Subscriptions are classified as available if they are not already attached to a system. If you are unable to find an available Satellite subscription, see the Red Hat Knowledgebase solution How do I figure out which subscriptions have been consumed by clients registered under Red Hat Subscription Manager? to run a script to see if your subscription is being consumed by another system.

Procedure

To attach the Satellite Infrastructure subscription, complete the following steps:

  1. Identify the Pool ID of the Satellite Infrastructure subscription: 

    # subscription-manager list --all --available --matches 'Red Hat Satellite Infrastructure Subscription'
    Copy to Clipboard Toggle word wrap

    The command displays output similar to the following: 

    Subscription Name:   Red Hat Satellite Infrastructure Subscription
Provides:            Red Hat Satellite
                      Red Hat Software Collections (for RHEL Server)
                      Red Hat CodeReady Linux Builder for x86_64
                      Red Hat Ansible Engine
                      Red Hat Enterprise Linux Load Balancer (for RHEL Server)
                      Red Hat
                      Red Hat Software Collections (for RHEL Server)
                      Red Hat Enterprise Linux Server
                      Red Hat Satellite Capsule
                      Red Hat Enterprise Linux for x86_64
                      Red Hat Enterprise Linux High Availability for x86_64
                      Red Hat Satellite
                      Red Hat Satellite 5 Managed DB
                      Red Hat Satellite 6
                      Red Hat Discovery
SKU:                 MCT3719
Contract:            11878983
Pool ID:             8a85f99968b92c3701694ee998cf03b8
Provides Management: No
Available:           1
Suggested:           1
Service Level:       Premium
Service Type:        L1-L3
Subscription Type:   Standard
Ends:                03/04/2020
System Type:         Physical
    Copy to Clipboard Toggle word wrap
  2. Make a note of the subscription Pool ID. Your subscription Pool ID is different from the example provided.

  3. Attach the Satellite Infrastructure subscription to the base system that your Satellite Server is running on: 

    # subscription-manager attach --pool=pool_id
    Copy to Clipboard Toggle word wrap

    The command displays output similar to the following: 

    Successfully attached a subscription for: Red Hat Satellite Infrastructure Subscription
    Copy to Clipboard Toggle word wrap

  4. Optional: Verify that the Satellite Infrastructure subscription is attached: 

    # subscription-manager list --consumed
    Copy to Clipboard Toggle word wrap

2.1.3. Configuring Repositories
Copiar enlace

Use this procedure to enable the repositories that are required to install Satellite Server.

Procedure

To configure the required repositories, complete the following steps:

  1. Disable all repositories: 

    # subscription-manager repos --disable "*"
    Copy to Clipboard Toggle word wrap

  2. Enable the following repositories: 

    # subscription-manager repos --enable=rhel-7-server-rpms \
--enable=rhel-7-server-satellite-6.6-rpms \
--enable=rhel-7-server-satellite-maintenance-6-rpms \
--enable=rhel-server-rhscl-7-rpms \
--enable=rhel-7-server-ansible-2.8-rpms
    Copy to Clipboard Toggle word wrap
    Note

    If you are installing Satellite Server as a virtual machine hosted on Red Hat Virtualization (RHV), you must also enable the Red Hat Common repository, and install RHV guest agents and drivers. For more information, see Installing the Guest Agents and Drivers on Red Hat Enterprise Linux in the Virtual Machine Management Guide for more information.

  3. Clear any yum metadata: 

    # yum clean all
    Copy to Clipboard Toggle word wrap

  4. Optional: Verify that the required repositories are enabled: 

    # yum repolist enabled
    Copy to Clipboard Toggle word wrap

2.1.4. Installing the Satellite Server Packages
Copiar enlace

You must update all packages before installing the Satellite Server packages. After installation, you must perform the initial configuration of Satellite Server, including configuring server certificates, setting your user name, password, and the default organization and location.

  1. Update all packages: 

    # yum update
    Copy to Clipboard Toggle word wrap

  2. Install the Satellite Server packages: 

    # yum install satellite
    Copy to Clipboard Toggle word wrap

2.2. Performing the Initial Configuration
Copiar enlace

This section details how to perform the initial configuration of the host operating system when installing Red Hat Satellite Server. This includes synchronizing the time, installing the sos package, and specifying an installation option.

Before you continue, consider which manifests or packages are relevant for your environment. For more information on manifests, see Managing Subscriptions in the Red Hat Satellite Content Management Guide.

2.2.1. Synchronizing the System Clock With chronyd
Copiar enlace

To minimize the effects of time drift, you must synchronize the system clock on the base system on which you want to install Satellite Server with Network Time Protocol (NTP) servers. If the base system clock is configured incorrectly, certificate verification might fail.

For more information about the chrony suite, see Configuring NTP Using the chrony Suite in the Red Hat Enterprise Linux 7 System Administrator’s Guide.

Procedure

To synchronize the system clock, complete the following steps:

  1. Install the chrony package: 

    # yum install chrony
    Copy to Clipboard Toggle word wrap

  2. Start and enable the chronyd service: 

    # systemctl start chronyd
# systemctl enable chronyd
    Copy to Clipboard Toggle word wrap

2.2.2. Installing the SOS Package on the Host Operating System
Copiar enlace

You should install the sos package on the host operating system. The sos package enables you to collect configuration and diagnostic information from a Red Hat Enterprise Linux system. You can also use it to provide the initial system analysis, which is required when opening a service request with Red Hat Technical Support. For more information on using sos, see the Knowledgebase solution What is a sosreport and how to create one in Red Hat Enterprise Linux 4.6 and later? on the Red Hat Customer Portal.

Install the sos package. 

# yum install sos
Copy to Clipboard Toggle word wrap

2.2.3. Specifying Installation Options
Copiar enlace

Satellite Server is installed using the satellite-installer installation script and as part of the initial configuration, you either automatically or manually configure Satellite.

Choose from one of these two methods:

  • Automatic Configuration - This method is performed by using an answer file to automate the configuration process when running the installation script. An answer file is a file containing a list of parameters that are read by a command or script. The default Satellite answer file is /etc/foreman-installer/scenarios.d/satellite-answers.yaml. The answer file in use is set by the answer_file directive in the /etc/foreman-installer/scenarios.d/satellite.yaml configuration file.

    To perform the initial configuration using the installation script with an answer file, see Section 2.2.3.2, “Performing the Initial Configuration Automatically using an Answer File”.

  • Manual Configuration - This method is performed by running the installation script with one or more command options. The command options override the corresponding default initial configuration options and are recorded in the Satellite answer file. You can run the script as often as needed to configure any necessary options.

    To perform the initial configuration using the installation script with command-line options, see Section 2.2.3.1, “Performing the Initial Configuration Manually”.

Note

Depending on the options that you use when running the Satellite installer, the configuration can take several minutes to complete. An administrator is able to view the answer file to see previously used options for both methods.

2.2.3.1. Performing the Initial Configuration Manually
Copiar enlace

This initial configuration procedure creates an organization, location, user name, and password. After the initial configuration, you can create additional organizations and locations if required. The initial configuration also installs MongoDB and PostgreSQL databases on the same server. Depending on your deployment, using external databases can benefit performance. For more information see, Section 3.12, “Using External Databases with Satellite”.

The installation process can take tens of minutes to complete. If you are connecting remotely to the system, consider using a utility such as screen that allows suspending and reattaching a communication session so that you can check the installation progress in case you become disconnected from the remote system. The Red Hat Knowledgebase article How to use the screen command describes installing screen; alternately see the screen manual page for more information. If you lose connection to the shell where the installation command is running, see the log at /var/log/foreman-installer/satellite.log to determine if the process completed successfully.

Considerations for Manual Configuration

Use the satellite-installer --scenario satellite --help command to display the available options and any default values. If you do not specify any values, the default values are used.

Specify a meaningful value for the option: --foreman-initial-organization. This can be your company name. An internal label that matches the value is also created and cannot be changed afterwards. If you do not specify a value, an organization called Default Organization with the label Default_Organization is created. You can rename the organization name but not the label.

By default, all configuration files configured by the installer are managed by Puppet. When satellite-installer runs, it overwrites any manual changes to the Puppet managed files with the initial values. By default, Satellite Server is installed with the Puppet agent running as a service. If required, you can disable Puppet agent on Satellite Server using the --puppet-runmode=none option.

If you want to manage DNS files and DHCP files manually, use the --foreman-proxy-dns-managed=false and --foreman-proxy-dhcp-managed=false options so that Puppet does not manage the files related to the respective services. For more information on how to apply custom configuration on other services, see Appendix A, Applying Custom Configuration to Red Hat Satellite.

Adding Multihomed DHCP details

If you want to use Multihomed DHCP, you must update the network interface file.

  1. In the /etc/systemd/system/dhcpd.service.d/interfaces.conf file, edit the following line to add Multihomed DHCP: 

    [Service]
ExecStart=/usr/sbin/dhcpd -f -cf /etc/dhcp/dhcpd.conf -user dhcpd -group dhcpd --no-pid eth0 eth1 eth2
    Copy to Clipboard Toggle word wrap

  2. Enter the following command to perform a daemon reload: 

    # systemctl --system daemon-reload
    Copy to Clipboard Toggle word wrap

  3. Enter the following command to restart the dhcpd service: 

    # systemctl restart dhcpd.service
    Copy to Clipboard Toggle word wrap

Manually Configuring Satellite Server

To perform the initial configuration manually, enter the following command with any additional options that you want to use: 

# satellite-installer --scenario satellite \
--foreman-initial-organization "initial_organization_name" \
--foreman-initial-location "initial_location_name" \
--foreman-initial-admin-username admin_user_name \
--foreman-initial-admin-password admin_password
Copy to Clipboard Toggle word wrap

The script displays its progress and writes logs to /var/log/foreman-installer/satellite.log.

You can use answer files to automate installations with customized options. The initial answer file is sparsely populated and after you run the satellite-installer script the first time, the answer file is populated with the standard parameter values for installation. You can change the configuration of Satellite Server at any time.

You should use the FQDN instead of the IP address where possible in case of network changes.

Automatically configuring Satellite Server using an Answer File

  1. Copy the default answer file /etc/foreman-installer/scenarios.d/satellite-answers.yaml to a location on your local file system. 

    # cp /etc/foreman-installer/scenarios.d/satellite-answers.yaml \
/etc/foreman-installer/scenarios.d/my-answer-file.yaml
    Copy to Clipboard Toggle word wrap
  2. To view all of the configurable options, enter the satellite-installer --scenario satellite --help command.
  3. Open your copy of the answer file, edit the values to suit your environment, and save the file.

  4. Open the /etc/foreman-installer/scenarios.d/satellite.yaml file and edit the answer file entry to point to your custom answer file. 

    :answer_file: /etc/foreman-installer/scenarios.d/my-answer-file.yaml
    Copy to Clipboard Toggle word wrap

  5. Run the satellite-installer script. 

    # satellite-installer --scenario satellite
    Copy to Clipboard Toggle word wrap

  6. If you have been installing in a disconnected environment, unmount the ISO images. 

    # umount /media/sat6
# umount /media/rhel7-server
    Copy to Clipboard Toggle word wrap

2.2.4. Creating a Subscription Allocation in Customer Portal
Copiar enlace

You can access your subscription information on the Red Hat Customer Portal. You can also assign subscriptions for use in on-premise management applications, such as Red Hat Satellite, using subscription allocations.

  1. Open https://access.redhat.com/ in your browser and log in to the Red Hat account that you used to register the system to Red Hat Subscription Management.
  2. Navigate to Subscriptions in the upper-left corner of the Customer Portal.
  3. Navigate to Subscription Allocations.
  4. Click Create New subscription allocation.
  5. In the Name field, enter a name.
  6. From the Type list, select the type and version that corresponds to your Satellite Server.
  7. Click Create.

2.2.5. Adding Subscriptions to an Allocation
Copiar enlace

The following procedure explains how to add subscriptions to an allocation.

  1. Open https://access.redhat.com/ in your browser and log in to the Red Hat account that you used to register the system to Red Hat Subscription Management.
  2. Navigate to Subscriptions in the upper-left corner of the Customer Portal.
  3. Navigate to Subscription Allocations.
  4. Click the allocation that you want to update.
  5. Click the Subscriptions tab.
  6. Click Add Subscriptions.
  7. A list of your Red Hat product subscriptions appears. Enter the Entitlement Quantity for each product.
  8. Click Submit to complete the assignment.

When you have added subscriptions to the allocation, export the manifest file.

2.2.6. Exporting a Subscription Manifest from the Customer Portal
Copiar enlace

While viewing a subscription allocation that has at least one subscription, you can export a manifest in either of two places:

  • From the Details tab, under the Subscription section, by clicking the Export Manifest button.
  • From the Subscriptions tab, by clicking the Export Manifest button.

When the manifest is exported, the Customer Portal encodes the selected subscriptions certificates and creates a .zip archive. This is the Subscription Manifest, which can be uploaded into the Satellite Server.

2.2.7. Importing a Subscription Manifest into the Satellite Server
Copiar enlace

Both the Red Hat Satellite 6 web UI and CLI provide methods for importing the manifest.

For Web UI Users

  1. Ensure the context is set to the organization you want to use.
  2. Navigate to Content > Subscriptions.
  3. Click Manage Manifest to display the manifest page for the organization.
  4. Click Choose file, select the Subscription Manifest, then click Upload.
  5. Click Choose file and select the manifest archive in a .zip format that you have exported from the Customer Portal.

For CLI Users

The Red Hat Satellite 6 CLI requires the manifest to be on the Satellite Server. On your local client system, copy the manifest to the Satellite Server: 

[user@client ~]$ scp ~/manifest_file.zip root@satellite.example.com:~/.
Copy to Clipboard Toggle word wrap

Then import it using the following command: 

[root@satellite ~]# hammer subscription upload \
--file ~/manifest_file.zip \
--organization "organization_name"
Copy to Clipboard Toggle word wrap

After a few minutes, the CLI reports a successful manifest import.

When you complete this section, you can enable repositories and import Red Hat content. This is a prerequisite for some of the following procedures. For more information, see Importing Red Hat Content in the Red Hat Satellite Content Management Guide.

Volver arriba
Red Hat logoGithubredditYoutubeTwitter

Aprender

Pruebe, compre y venda

Comunidades

Acerca de la documentación de Red Hat

Ayudamos a los usuarios de Red Hat a innovar y alcanzar sus objetivos con nuestros productos y servicios con contenido en el que pueden confiar. Explore nuestras recientes actualizaciones.

Hacer que el código abierto sea más inclusivo

Red Hat se compromete a reemplazar el lenguaje problemático en nuestro código, documentación y propiedades web. Para más detalles, consulte el Blog de Red Hat.

Acerca de Red Hat

Ofrecemos soluciones reforzadas que facilitan a las empresas trabajar en plataformas y entornos, desde el centro de datos central hasta el perímetro de la red.

Theme

© 2025 Red Hat