Rechercher
SupportConsoleDéveloppeursCommencer un essaiContact

Ce contenu n'est pas disponible dans la langue sélectionnée.

Chapter 5. Migrate virtual environments to execution environments

download PDF

Ansible Automation Platform 2 comes with a re-imagined architecture that fully decouples the automation control plane and execution plane. The new capabilities enable easier to scale automation across the globe and allow you to run your automation as close to the source as possible without being bound to running automation in a single data center. It’s more dynamic, scalable, resilient and flexible compared to Ansible Automation Platform 1.2.

With the introduction of automation execution environments, these container images allow for all the automation needed to be packaged and run including the key components such as Ansible Core, Ansible Content Collections, Python dependencies, Red Hat Enterprise Linux UBI 8, and any additional package dependencies.

This chapter focuses on migrating your custom Python virtual environments in your Ansible Automation Platform 1.2 cluster to user-built automation execution environments.

This one-time effort opens the door to take advantage of the latest Ansible Automation Platform 2 capabilities and the ability to execute consistent automation across multiple platforms with lower long-term maintenance.

Warning

In order to access user-built execution environments, they are required to be hosted within private automation hub or a container registry. For more information on how to install private automation hub visit our Deploying Ansible Automation Platform 2.1 reference architecture.

5.1. Automating the migration of virtual environments to execution environments

For simplicity, we are including supplemental Ansible Playbooks that automate the process by simply running an Ansible command.

For completeness, the manual process consists of:

  1. An Ansible Automation Platform 1.2 environment with custom Python virtual environments
  2. Using of the awx-manage command line utility to get a custom list of Python virtual environments
  3. Running the awx-manage export_custom_venv command on each Python virtual environment to get the list of Python packages installed
  4. Checking the association of a Python virtual environment using the awx-manage custom_venv_associations command
  5. Filtering the above information to create execution environments using the ansible-builder tool

The automated process consists of:

  1. Pulling a list of packages from each custom Python virtual environments present on the Ansible Automation Platform 1.2 environment
  2. Comparing the package lists from the previous step with the package list of the Ansible-2.9[1] to find the packages that are not present in the base Ansible-2.9 execution environment
  3. Create a new custom execution environment that uses the Ansible-2.9 execution environment as the base and including the missing dependencies from the list in the previous step

To run a scenario of what that may look like, let’s take the following example.

In our existing Ansible Automation Platform 1.2, there are two custom Python virtual environments labeled custom-venv1 and custom-venv2.

Using the role virtualenv_migrate packaged in the redhat_cop.ee_utilities collection we will run it against our Ansible Automation Platform 1.2 environment via ssh access to the Ansible Tower node to extract the the packages and their versions that are not currently part of the base execution environment we are comparing against (Ansible 2.9 execution environment).

Note

The redhat_cop.ee_utilities collection is a community project and officially not supported by Red Hat.

A sample playbook and inventory file respectively of the environment are found below:

playbook.yml

---
- name: Review custom virtualenvs and pull requirements
  hosts: enva_tower
  become: true
  tasks:
    - name: Include venv role
      include_role:
        name: redhat_cop.ee_utilities.virtualenv_migrate

Inventory

[tower]
ansibletower.example.com
ansible_ssh_private_key_file=/path/to/example.pem


[all:vars]
###############################################################################
# Required configuration variables for migration from venv -> EE              #
###############################################################################

# The default URL location to the execution environment (Default Ansible 2.9)
# If you want to use the newest Ansible base, change to: ee-minimal-rhel8:latest
venv_migrate_default_ee_url="registry.redhat.io/ansible-automation-platform-21/ee-29-rhel8:latest"

# User credential for access to venv_migrate_default_ee_url
registry_username='myusername'

Note
  • Add ansible_user=<ANSIBLE_USER> based on the user needed to ssh into the Ansible Tower node.
  • This reference environment takes advantage of encrypted credentials and does not include passwords in plain text. Details in Appendix C, Creating an encrypted credentials.yml file can be found on how to use ansible-vault to encrypt your registry credentials. An encrypted credentials.yml file is used to supply registry_password
Warning

This role requires sudo privileges in order to run the podman commands.

The sample output of the Ansible playbook shows a list of the additional packages that are required for each custom Python virtual environment. In this case you’ll notice that custom-venv1 Python virtual environment requires the following packages in additional to what is already part of the Ansible 2.9 execution environment:

  • certifi
  • charset-normalizer
  • enum34
  • future
  • solidfire-sdk-python

While custom-venv2 Python virtual environment only required zabbix-api in addition to what is already part of the standard Ansible-2.9 execution environment.

Note

The Ansible 2.9 execution environment is used for comparison against the custom Python virtual environments because of the fact that most Ansible Automation Platform 1.2 environments are using Ansible 2.9. This ensures an easier migration transition due to backward compatibility. 

TASK [redhat_cop.tower_utilities.virtualenv_migrate : diff | Show the packages that are extra from default EEs in custom venvs.] ******************************************************************************
ok: [3.228.23.40 -> localhost] => {
    "msg": [
        {
            "/opt/my-envs/custom-venv1/": [
                "certifi",
                "charset-normalizer",
                "enum34",
                "future",
                "solidfire-sdk-python"
            ]
        },
        {
            "/opt/my-envs/custom-venv2/": [
                "zabbix-api"
            ]
        }
    ]
}

Once the packages are captured for each custom Python virtual environment, the Ansible playbook uses the ee_builder role that is part of the redhat_cop.ee_utilities collection that automates the creation of execution environments on the local user environment.

Before running the supplied Ansible playbook, install ansible-builder on your localhost machine, the playbook run creates execution environments on your local machine based upon the package delta between the custom Python virtual environment and the base execution environment supplied. 

$ podman images

REPOSITORY                           TAG                IMAGE ID
localhost/custom-venv2               latest             c017418d1919
localhost/custom-venv1               latest             7cbe3b49974d
localhost/custom-venv                latest             9d5d809f38b0

5.1.1. Pushing to private automation hub

With the local execution environments in place, you can push them to your private automation hub via:

Note

In this reference architecture, we keep the name of the automation execution environments as the name of the custom Python virtual environments for simplicity. If a change in name is required, use the podman tag command before pushing the execution environments to your private automation hub or a container registry of choice. 

$ podman login [automation-hub-url]
# Enter the username and password to access Private Automation Hub.
$ podman tag [image-id] [automation-hub-url]/[container image name]
$ podman push [automation-hub-url]/[container image name]
Tip

For more information, visit: Managing containers in private automation hub

Once there, synchronize the execution environments to your automation controller by creating the registry credentials for your private automation hub inside the controller user interface.

To create your registry credentials within automation controller:

  1. Select Resources→Credentials
  2. Within Credentials, select the blue Add button

  3. In the Create New Credentials window,

    1. provide a Name e.g. My private automation hub credentials
    2. under Credential Type select the drop down and select Container Registry

    3. under Type Details

      1. provide Authentication URL, e.g. pah.example.com
      2. provide your private automation hub username within Username field
      3. provide your private automation hub password or token within Password or Token field
      4. select Verify SSL if your private automation hub environment supports SSL
  4. Click Save

To make the execution environments available within automation controller, create a new execution environment that will pull the images from your private automation hub.

Within automation controller,

  1. Select Administration→Execution Environments
  2. Within Execution Environments, select the blue Add button

  3. In the Create new execution environment window,

    1. provide a Name, e.g. my execution environment
    2. provide the image location of the execution environment, e.g. repo/project/image-name:tag

    3. select the Registry credential magnifying glass

      1. click the radio button for your private automation hub credentials, e.g. my private automation hub credentials

With the execution environments now available within automation controller, they can be used against any existing Job Templates or newly created Job Templates.

Tip

When creating new user-built execution environments not constrained to require backward compatibility, it is recommended to use the ee-minimal execution environment as your base execution environment to build your new images against.


[1] This reference architecture uses the ansible-2.9 execution environment to best mimic the execution plane environment of Ansible Automation Platform 1.2.
Red Hat logoGithubRedditYoutubeTwitter

Apprendre

Essayez, achetez et vendez

Communautés

À propos de la documentation Red Hat

Nous aidons les utilisateurs de Red Hat à innover et à atteindre leurs objectifs grâce à nos produits et services avec un contenu auquel ils peuvent faire confiance.

Rendre l’open source plus inclusif

Red Hat s'engage à remplacer le langage problématique dans notre code, notre documentation et nos propriétés Web. Pour plus de détails, consultez leBlog Red Hat.

À propos de Red Hat

Nous proposons des solutions renforcées qui facilitent le travail des entreprises sur plusieurs plates-formes et environnements, du centre de données central à la périphérie du réseau.

© 2024 Red Hat, Inc.