Ce contenu n'est pas disponible dans la langue sélectionnée.

Chapter 21. Ceph Sink

Upload data to an Ceph Bucket managed by a Object Storage Gateway.

In the header, you can optionally set the file / ce-file property to specify the name of the file to upload.

If you do not set the property in the header, the Kamelet uses the exchange ID for the file name.

21.1. Configuration Options

The following table summarizes the configuration options available for the ceph-sink Kamelet:

Property	Name	Description	Type	Default	Example
accessKey *	Access Key	The access key.	string
bucketName *	Bucket Name	The Ceph Bucket name.	string
cephUrl *	Ceph Url Address	Set the Ceph Object Storage Address Url.	string		`"http://ceph-storage-address.com"`
secretKey *	Secret Key	The secret key.	string
zoneGroup *	Bucket Zone Group	The bucket zone group.	string
autoCreateBucket	Autocreate Bucket	Specifies to automatically create the bucket.	boolean	`false`
keyName	Key Name	The key name for saving an element in the bucket.	string

Note

Fields marked with an asterisk (*) are mandatory.

21.2. Dependencies

At runtime, the ceph-sink Kamelet relies upon the presence of the following dependencies:

camel:core
camel:aws2-s3
camel:kamelet

21.3. Usage

This section describes how you can use the ceph-sink.

21.3.1. Knative Sink

You can use the ceph-sink Kamelet as a Knative sink by binding it to a Knative object.

ceph-sink-binding.yaml

apiVersion: camel.apache.org/v1alpha1
kind: KameletBinding
metadata:
  name: ceph-sink-binding
spec:
  source:
    ref:
      kind: Channel
      apiVersion: messaging.knative.dev/v1
      name: mychannel
  sink:
    ref:
      kind: Kamelet
      apiVersion: camel.apache.org/v1alpha1
      name: ceph-sink
    properties:
      accessKey: "The Access Key"
      bucketName: "The Bucket Name"
      cephUrl: "http://ceph-storage-address.com"
      secretKey: "The Secret Key"
      zoneGroup: "The Bucket Zone Group"

21.3.1.1. Prerequisite

Make sure you have "Red Hat Integration - Camel K" installed into the OpenShift cluster you’re connected to.

21.3.1.2. Procedure for using the cluster CLI

Save the ceph-sink-binding.yaml file to your local drive, and then edit it as needed for your configuration.
Run the sink by using the following command:
```
oc apply -f ceph-sink-binding.yaml
```

21.3.1.3. Procedure for using the Kamel CLI

Configure and run the sink by using the following command:

kamel bind channel:mychannel ceph-sink -p "sink.accessKey=The Access Key" -p "sink.bucketName=The Bucket Name" -p "sink.cephUrl=http://ceph-storage-address.com" -p "sink.secretKey=The Secret Key" -p "sink.zoneGroup=The Bucket Zone Group"

This command creates the KameletBinding in the current namespace on the cluster.

21.3.2. Kafka Sink

You can use the ceph-sink Kamelet as a Kafka sink by binding it to a Kafka topic.

ceph-sink-binding.yaml

apiVersion: camel.apache.org/v1alpha1
kind: KameletBinding
metadata:
  name: ceph-sink-binding
spec:
  source:
    ref:
      kind: KafkaTopic
      apiVersion: kafka.strimzi.io/v1beta1
      name: my-topic
  sink:
    ref:
      kind: Kamelet
      apiVersion: camel.apache.org/v1alpha1
      name: ceph-sink
    properties:
      accessKey: "The Access Key"
      bucketName: "The Bucket Name"
      cephUrl: "http://ceph-storage-address.com"
      secretKey: "The Secret Key"
      zoneGroup: "The Bucket Zone Group"

21.3.2.1. Prerequisites

Ensure that you’ve installed the AMQ Streams operator in your OpenShift cluster and created a topic named my-topic in the current namespace. Make also sure you have "Red Hat Integration - Camel K" installed into the OpenShift cluster you’re connected to.

21.3.2.2. Procedure for using the cluster CLI

Save the ceph-sink-binding.yaml file to your local drive, and then edit it as needed for your configuration.
Run the sink by using the following command:
```
oc apply -f ceph-sink-binding.yaml
```

21.3.2.3. Procedure for using the Kamel CLI

Configure and run the sink by using the following command:

kamel bind kafka.strimzi.io/v1beta1:KafkaTopic:my-topic ceph-sink -p "sink.accessKey=The Access Key" -p "sink.bucketName=The Bucket Name" -p "sink.cephUrl=http://ceph-storage-address.com" -p "sink.secretKey=The Secret Key" -p "sink.zoneGroup=The Bucket Zone Group"

This command creates the KameletBinding in the current namespace on the cluster.

21.4. Kamelet source file

https://github.com/openshift-integration/kamelet-catalog/ceph-sink.kamelet.yaml