SupportConsoleDéveloppeursCommencer un essaiContact

Ce contenu n'est pas disponible dans la langue sélectionnée.

Chapter 13. Deploy an AWS Global Accelerator load balancer

This topic describes the procedure required to deploy an AWS Global Accelerator to route traffic between multi-site Red Hat build of Keycloak deployments.

This deployment is intended to be used with the setup described in the Concepts for multi-site deployments chapter. Use this deployment with the other building blocks outlined in the Building blocks multi-site deployments chapter.

Note

We provide these blueprints to show a minimal functionally complete example with a good baseline performance for regular installations. You would still need to adapt it to your environment and your organization’s standards and security best practices.

13.1. Audience

This chapter describes how to deploy an AWS Global Accelerator instance to handle Red Hat build of Keycloak client connection failover for multiple availability-zone Red Hat build of Keycloak deployments.

13.2. Architecture

To ensure user requests are routed to each Red Hat build of Keycloak site we need to utilise a load balancer. To prevent issues with DNS caching on the client-side, the implementation should use a static IP address that remains the same when routing clients to both availability-zones.

In this chapter we describe how to route all Red Hat build of Keycloak client requests via an AWS Global Accelerator load balancer. In the event of a Red Hat build of Keycloak site failing, the Accelerator ensures that all client requests are routed to the remaining healthy site. If both sites are marked as unhealthy, then the Accelerator will “fail-open” and forward requests to a site chosen at random.

Figure 13.1. AWS Global Accelerator Failover

An AWS Network Load Balancer (NLB) is created on both ROSA clusters in order to make the Keycloak pods available as Endpoints to an AWS Global Accelerator instance. Each cluster endpoint is assigned a weight of 128 (half of the maximum weight 255) to ensure that accelerator traffic is routed equally to both availability-zones when both clusters are healthy.

13.3. Prerequisites

  • ROSA based Multi-AZ Red Hat build of Keycloak deployment

13.4. Procedure

  1. Create Network Load Balancers

    Perform the following on each of the Red Hat build of Keycloak clusters:

    1. Login to the ROSA cluster

    2. Create a Kubernetes load balancer service

      Command:

      cat <<EOF | oc apply -n $NAMESPACE -f - 1
  apiVersion: v1
  kind: Service
  metadata:
    name: accelerator-loadbalancer
    annotations:
      service.beta.kubernetes.io/aws-load-balancer-additional-resource-tags: accelerator=${ACCELERATOR_NAME},site=${CLUSTER_NAME},namespace=${NAMESPACE} 2
      service.beta.kubernetes.io/aws-load-balancer-type: "nlb"
      service.beta.kubernetes.io/aws-load-balancer-healthcheck-path: "/lb-check"
      service.beta.kubernetes.io/aws-load-balancer-healthcheck-protocol: "https"
      service.beta.kubernetes.io/aws-load-balancer-healthcheck-interval: "10" 3
      service.beta.kubernetes.io/aws-load-balancer-healthcheck-healthy-threshold: "3" 4
      service.beta.kubernetes.io/aws-load-balancer-healthcheck-unhealthy-threshold: "3" 5
  spec:
    ports:
    - name: https
      port: 443
      protocol: TCP
      targetPort: 8443
    selector:
      app: keycloak
      app.kubernetes.io/instance: keycloak
      app.kubernetes.io/managed-by: keycloak-operator
    sessionAffinity: None
    type: LoadBalancer
EOF

      1
      $NAMESPACE should be replaced with the namespace of your Red Hat build of Keycloak deployment
      2
      Add additional Tags to the resources created by AWS so that we can retrieve them later. ACCELERATOR_NAME should be the name of the Global Accelerator created in subsequent steps and CLUSTER_NAME should be the name of the current site.
      3
      How frequently the healthcheck probe is executed in seconds
      4
      How many healthchecks must pass for the NLB to be considered healthy
      5
      How many healthchecks must fail for the NLB to be considered unhealthy

    3. Take note of the DNS hostname as this will be required later:

      Command:

      oc -n $NAMESPACE get svc accelerator-loadbalancer --template="{{range .status.loadBalancer.ingress}}{{.hostname}}{{end}}"

      Output:

      abab80a363ce8479ea9c4349d116bce2-6b65e8b4272fa4b5.elb.eu-west-1.amazonaws.com

  2. Create a Global Accelerator instance

    Command:

    aws globalaccelerator create-accelerator \
  --name example-accelerator \ 1
  --ip-address-type DUAL_STACK \ 2
  --region us-west-2 3

    1
    The name of the accelerator to be created, update as required
    2
    Can be 'DUAL_STACK' or 'IPV4'
    3
    All globalaccelerator commands must use the region 'us-west-2'

    Output:

    {
    "Accelerator": {
        "AcceleratorArn": "arn:aws:globalaccelerator::606671647913:accelerator/e35a94dd-391f-4e3e-9a3d-d5ad22a78c71", 1
        "Name": "example-accelerator",
        "IpAddressType": "DUAL_STACK",
        "Enabled": true,
        "IpSets": [
            {
                "IpFamily": "IPv4",
                "IpAddresses": [
                    "75.2.42.125",
                    "99.83.132.135"
                ],
                "IpAddressFamily": "IPv4"
            },
            {
                "IpFamily": "IPv6",
                "IpAddresses": [
                    "2600:9000:a400:4092:88f3:82e2:e5b2:e686",
                    "2600:9000:a516:b4ef:157e:4cbd:7b48:20f1"
                ],
                "IpAddressFamily": "IPv6"
            }
        ],
        "DnsName": "a099f799900e5b10d.awsglobalaccelerator.com", 2
        "Status": "IN_PROGRESS",
        "CreatedTime": "2023-11-13T15:46:40+00:00",
        "LastModifiedTime": "2023-11-13T15:46:42+00:00",
        "DualStackDnsName": "ac86191ca5121e885.dualstack.awsglobalaccelerator.com" 3
    }
}

    1
    The ARN associated with the created Accelerator instance, this will be used in subsequent commands
    2
    The DNS name which IPv4 Red Hat build of Keycloak clients should connect to
    3
    The DNS name which IPv6 Red Hat build of Keycloak clients should connect to

  3. Create a Listener for the accelerator

    Command:

    aws globalaccelerator create-listener \
  --accelerator-arn 'arn:aws:globalaccelerator::606671647913:accelerator/e35a94dd-391f-4e3e-9a3d-d5ad22a78c71' \
  --port-ranges '[{"FromPort":443,"ToPort":443}]' \
  --protocol TCP \
  --region us-west-2

    Output:

    {
    "Listener": {
        "ListenerArn": "arn:aws:globalaccelerator::606671647913:accelerator/e35a94dd-391f-4e3e-9a3d-d5ad22a78c71/listener/1f396d40",
        "PortRanges": [
            {
                "FromPort": 443,
                "ToPort": 443
            }
        ],
        "Protocol": "TCP",
        "ClientAffinity": "NONE"
    }
}

  4. Create an Endpoint Group for the Listener

    Command:

    CLUSTER_1_ENDPOINT_ARN=$(aws elbv2 describe-load-balancers \
    --query "LoadBalancers[?DNSName=='abab80a363ce8479ea9c4349d116bce2-6b65e8b4272fa4b5.elb.eu-west-1.amazonaws.com'].LoadBalancerArn" \ 1
    --region eu-west-1 \ 2
    --output text
)
CLUSTER_2_ENDPOINT_ARN=$(aws elbv2 describe-load-balancers \
    --query "LoadBalancers[?DNSName=='a1c76566e3c334e4ab7b762d9f8dcbcf-985941f9c8d108d4.elb.eu-west-1.amazonaws.com'].LoadBalancerArn" \ 3
    --region eu-west-1 \ 4
    --output text
)
ENDPOINTS='[
  {
    "EndpointId": "'${CLUSTER_1_ENDPOINT_ARN}'",
    "Weight": 128,
    "ClientIPPreservationEnabled": false
  },
  {
    "EndpointId": "'${CLUSTER_2_ENDPOINT_ARN}'",
    "Weight": 128,
    "ClientIPPreservationEnabled": false
  }
]'
aws globalaccelerator create-endpoint-group \
  --listener-arn 'arn:aws:globalaccelerator::606671647913:accelerator/e35a94dd-391f-4e3e-9a3d-d5ad22a78c71/listener/1f396d40' \ 5
  --traffic-dial-percentage 100 \
  --endpoint-configurations ${ENDPOINTS} \
  --endpoint-group-region eu-west-1 \ 6
  --region us-west-2

    1 3
    The DNS hostname of the Cluster’s NLB
    2 4 5
    The ARN of the Listener created in the previous step
    6
    This should be the AWS region that hosts the clusters

    Output:

    {
    "EndpointGroup": {
        "EndpointGroupArn": "arn:aws:globalaccelerator::606671647913:accelerator/e35a94dd-391f-4e3e-9a3d-d5ad22a78c71/listener/1f396d40/endpoint-group/2581af0dc700",
        "EndpointGroupRegion": "eu-west-1",
        "EndpointDescriptions": [
            {
                "EndpointId": "arn:aws:elasticloadbalancing:eu-west-1:606671647913:loadbalancer/net/abab80a363ce8479ea9c4349d116bce2/6b65e8b4272fa4b5",
                "Weight": 128,
                "HealthState": "HEALTHY",
                "ClientIPPreservationEnabled": false
            },
            {
                "EndpointId": "arn:aws:elasticloadbalancing:eu-west-1:606671647913:loadbalancer/net/a1c76566e3c334e4ab7b762d9f8dcbcf/985941f9c8d108d4",
                "Weight": 128,
                "HealthState": "HEALTHY",
                "ClientIPPreservationEnabled": false
            }
        ],
        "TrafficDialPercentage": 100.0,
        "HealthCheckPort": 443,
        "HealthCheckProtocol": "TCP",
        "HealthCheckPath": "undefined",
        "HealthCheckIntervalSeconds": 30,
        "ThresholdCount": 3
    }
}

  5. Optional: Configure your custom domain

    If you are using a custom domain, pointed your custom domain to the AWS Global Load Balancer by configuring an Alias or CNAME in your custom domain.

  6. Create or update the Red Hat build of Keycloak Deployment

    Perform the following on each of the Red Hat build of Keycloak clusters:

    1. Login to the ROSA cluster

    2. Ensure the Keycloak CR has the following configuration 

      apiVersion: k8s.keycloak.org/v2alpha1
kind: Keycloak
metadata:
  name: keycloak
spec:
  hostname:
    hostname: $HOSTNAME 1
  ingress:
    enabled: false 2
      1
      The hostname clients use to connect to Keycloak
      2
      Disable the default ingress as all Red Hat build of Keycloak access should be via the provisioned NLB

      To ensure that request forwarding works as expected, it is necessary for the Keycloak CR to specify the hostname through which clients will access the Red Hat build of Keycloak instances. This can either be the DualStackDnsName or DnsName hostname associated with the Global Accelerator. If you are using a custom domain, point your custom domain to the AWS Globa Accelerator, and use your custom domain here.

13.5. Verify

To verify that the Global Accelerator is correctly configured to connect to the clusters, navigate to hostname configured above, and you should be presented with the Red Hat build of Keycloak admin console.

13.6. Further reading

Red Hat logoGithubRedditYoutubeTwitter

Apprendre

Essayez, achetez et vendez

Communautés

À propos de la documentation Red Hat

Nous aidons les utilisateurs de Red Hat à innover et à atteindre leurs objectifs grâce à nos produits et services avec un contenu auquel ils peuvent faire confiance.

Rendre l’open source plus inclusif

Red Hat s'engage à remplacer le langage problématique dans notre code, notre documentation et nos propriétés Web. Pour plus de détails, consultez leBlog Red Hat.

À propos de Red Hat

Nous proposons des solutions renforcées qui facilitent le travail des entreprises sur plusieurs plates-formes et environnements, du centre de données central à la périphérie du réseau.

© 2024 Red Hat, Inc.