Ce contenu n'est pas disponible dans la langue sélectionnée.
4.13. Fujitsu-Siemens RemoteView Service Board (RSB)
Table 4.14, “Fujitsu Siemens Remoteview Service Board (RSB)” lists the fence device parameters used by
fence_rsb, the fence agent for Fujitsu-Siemens RemoteView Service Board (RSB).
| luci Field | cluster.conf Attribute | Description |
|---|---|---|
| Name | name | A name for the RSB to use as a fence device. |
| IP Address or Hostname | ipaddr | The host name assigned to the device. |
| Login | login | The login name used to access the device. |
| Password | passwd | The password used to authenticate the connection to the device. |
| Password Script (optional) | passwd_script | The script that supplies a password for access to the fence device. Using this supersedes the parameter. |
| TCP Port | ipport | The port number on which the telnet service listens. The default value is 3172. |
| Force Command Prompt | cmd_prompt | The command prompt to use. The default value is '\$'. |
| Power Wait (seconds) | power_wait | Number of seconds to wait after issuing a power off or power on command. |
| Delay (seconds) | delay | The number of seconds to wait before fencing is started. The default value is 0. |
| Power Timeout (seconds) | power_timeout | Number of seconds to continue testing for a status change after issuing a power off or power on command. The default value is 20. |
| Shell Timeout (seconds) | shell_timeout | Number of seconds to wait for a command prompt after issuing a command. The default value is 3. |
| Login Timeout (seconds) | login_timeout | Number of seconds to wait for a command prompt after login. The default value is 5. |
| Times to Retry Power On Operation | retry_on | Number of attempts to retry a power on operation. The default value is 1. |
Figure 4.10, “Fujitsu-Siemens RSB” shows the configuration screen for adding an Fujitsu-Siemens RSB fence device.
Figure 4.10. Fujitsu-Siemens RSB
The following command creates a fence device instance for a Fujiitsu-Siemens RSB device:
ccs -f cluster.conf --addfencedev fsrbtest1 agent=fence_rsb ipaddr=192.168.0.1 login=root passwd=password123 \ telnet_port=3172
The following is the
cluster.conf entry for the fence_rsb device:
<fencedevices> <fencedevice agent="fence_rsb" ipaddr="192.168.0.1" login="root" name="fsrsbtest1" passwd="password123" telnet_port="3172"/> </fencedevices>
