Red Hat Summit Red Hat SummitSupportConsoleDéveloppeursCommencer un essaiContact

Ce contenu n'est pas disponible dans la langue sélectionnée.

Chapter 5. Uninstalling OpenShift Container Storage

5.1. Uninstalling OpenShift Container Storage in Internal mode
Copier lien

Use the steps in this section to uninstall OpenShift Container Storage.

Uninstall Annotations

Annotations on the Storage Cluster are used to change the behavior of the uninstall process. To define the uninstall behavior, the following two annotations have been introduced in the storage cluster:

  • uninstall.ocs.openshift.io/cleanup-policy: delete
  • uninstall.ocs.openshift.io/mode: graceful

The below table provides information on the different values that can used with these annotations:

Expand
Table 5.1. uninstall.ocs.openshift.io uninstall annotations descriptions
AnnotationValueDefaultBehavior

cleanup-policy

delete

Yes

Rook cleans up the physical drives and the DataDirHostPath

cleanup-policy

retain

No

Rook does not clean up the physical drives and the DataDirHostPath

mode

graceful

Yes

Rook and NooBaa pauses the uninstall process until the PVCs and the OBCs are removed by the administrator/user

mode

forced

No

Rook and NooBaa proceeds with uninstall even if PVCs/OBCs provisioned using Rook and NooBaa exist respectively.

You can change the cleanup policy or the uninstall mode by editing the value of the annotation by using the following commands: 

$ oc annotate storagecluster -n openshift-storage ocs-storagecluster uninstall.ocs.openshift.io/cleanup-policy="retain" --overwrite
storagecluster.ocs.openshift.io/ocs-storagecluster annotated
Copy to Clipboard Toggle word wrap 
$ oc annotate storagecluster -n openshift-storage ocs-storagecluster uninstall.ocs.openshift.io/mode="forced" --overwrite
storagecluster.ocs.openshift.io/ocs-storagecluster annotated
Copy to Clipboard Toggle word wrap

Prerequisites

  • Ensure that the OpenShift Container Storage cluster is in a healthy state. The uninstall process can fail when some of the pods are not terminated successfully due to insufficient resources or nodes. In case the cluster is in an unhealthy state, contact Red Hat Customer Support before uninstalling OpenShift Container Storage.
  • Ensure that applications are not consuming persistent volume claims (PVCs) or object bucket claims (OBCs) using the storage classes provided by OpenShift Container Storage.
  • If any custom resources (such as custom storage classes, cephblockpools) were created by the admin, they must be deleted by the admin after removing the resources which consumed them.

Procedure

  1. Delete the volume snapshots that are using OpenShift Container Storage.

    1. List the volume snapshots from all the namespaces. 

      $ oc get volumesnapshot --all-namespaces
      Copy to Clipboard Toggle word wrap

    2. From the output of the previous command, identify and delete the volume snapshots that are using OpenShift Container Storage. 

      $ oc delete volumesnapshot <VOLUME-SNAPSHOT-NAME> -n <NAMESPACE>
      Copy to Clipboard Toggle word wrap

  2. Delete PVCs and OBCs that are using OpenShift Container Storage.

    In the default uninstall mode (graceful), the uninstaller waits till all the PVCs and OBCs that use OpenShift Container Storage are deleted.

    If you wish to delete the Storage Cluster without deleting the PVCs beforehand, you may set the uninstall mode annotation to forced and skip this step. Doing this results in orphan PVCs and OBCs in the system.

    1. Delete OpenShift Container Platform monitoring stack PVCs using OpenShift Container Storage.

      For more information, see Section 5.2, “Removing monitoring stack from OpenShift Container Storage”.

    2. Delete OpenShift Container Platform Registry PVCs using OpenShift Container Storage.

      For more information, see Section 5.3, “Removing OpenShift Container Platform registry from OpenShift Container Storage”.

    3. Delete OpenShift Container Platform logging PVCs using OpenShift Container Storage.

      For more information, see Section 5.4, “Removing the cluster logging operator from OpenShift Container Storage”.

    4. Delete other PVCs and OBCs provisioned using OpenShift Container Storage.

      • Following script is sample script to identify the PVCs and OBCs provisioned using OpenShift Container Storage. The script ignores the PVCs that are used internally by Openshift Container Storage. 

        #!/bin/bash

RBD_PROVISIONER="openshift-storage.rbd.csi.ceph.com"
CEPHFS_PROVISIONER="openshift-storage.cephfs.csi.ceph.com"
NOOBAA_PROVISIONER="openshift-storage.noobaa.io/obc"
RGW_PROVISIONER="openshift-storage.ceph.rook.io/bucket"

NOOBAA_DB_PVC="noobaa-db"
NOOBAA_BACKINGSTORE_PVC="noobaa-default-backing-store-noobaa-pvc"

# Find all the OCS StorageClasses
OCS_STORAGECLASSES=$(oc get storageclasses | grep -e "$RBD_PROVISIONER" -e "$CEPHFS_PROVISIONER" -e "$NOOBAA_PROVISIONER" -e "$RGW_PROVISIONER" | awk '{print $1}')

# List PVCs in each of the StorageClasses
for SC in $OCS_STORAGECLASSES
do
        echo "======================================================================"
        echo "$SC StorageClass PVCs and OBCs"
        echo "======================================================================"
        oc get pvc  --all-namespaces --no-headers 2>/dev/null | grep $SC | grep -v -e "$NOOBAA_DB_PVC" -e "$NOOBAA_BACKINGSTORE_PVC"
        oc get obc  --all-namespaces --no-headers 2>/dev/null | grep $SC
        echo
done
        Copy to Clipboard Toggle word wrap
        Note

        Omit RGW_PROVISIONER for cloud platforms.

      • Delete the OBCs. 

        $ oc delete obc <obc name> -n <project name>
        Copy to Clipboard Toggle word wrap

      • Delete the PVCs. 

        $ oc delete pvc <pvc name> -n <project-name>
        Copy to Clipboard Toggle word wrap
        Note

        Ensure that you have removed any custom backing stores, bucket classes, etc., created in the cluster.

  3. Delete the Storage Cluster object and wait for the removal of the associated resources. 

    $ oc delete -n openshift-storage storagecluster --all --wait=true
    Copy to Clipboard Toggle word wrap

  4. Check for cleanup pods if the uninstall.ocs.openshift.io/cleanup-policy was set to delete(default) and ensure that their status is Completed. 

    $ oc get pods -n openshift-storage | grep -i cleanup
NAME                                READY   STATUS      RESTARTS   AGE
cluster-cleanup-job-<xx>        	0/1     Completed   0          8m35s
cluster-cleanup-job-<yy>     		0/1     Completed   0          8m35s
cluster-cleanup-job-<zz>     		0/1     Completed   0          8m35s
    Copy to Clipboard Toggle word wrap

  5. Confirm that the directory /var/lib/rook is now empty. This directory will be empty only if the uninstall.ocs.openshift.io/cleanup-policy annotation was set to delete(default). 

    $ for i in $(oc get node -l cluster.ocs.openshift.io/openshift-storage= -o jsonpath='{ .items[*].metadata.name }'); do oc debug node/${i} -- chroot /host  ls -l /var/lib/rook; done
    Copy to Clipboard Toggle word wrap

  6. If encryption was enabled at the time of install, remove dm-crypt managed device-mapper mapping from OSD devices on all the OpenShift Container Storage nodes.

    1. Create a debug pod and chroot to the host on the storage node. 

      $ oc debug node/<node name>
$ chroot /host
      Copy to Clipboard Toggle word wrap

    2. Get Device names and make note of the OpenShift Container Storage devices. 

      $ dmsetup ls
ocs-deviceset-0-data-0-57snx-block-dmcrypt (253:1)
      Copy to Clipboard Toggle word wrap

    3. Remove the mapped device. 

      $ cryptsetup luksClose --debug --verbose ocs-deviceset-0-data-0-57snx-block-dmcrypt
      Copy to Clipboard Toggle word wrap
      Note

      If the above command gets stuck due to insufficient privileges, run the following commands:

      • Press CTRL+Z to exit the above command.

      • Find PID of the process which was stuck. 

        $ ps -ef | grep crypt
        Copy to Clipboard Toggle word wrap

      • Terminate the process using kill command. 

        $ kill -9 <PID>
        Copy to Clipboard Toggle word wrap

      • Verify that the device name is removed. 

        $ dmsetup ls
        Copy to Clipboard Toggle word wrap

  7. Delete the namespace and wait till the deletion is complete. You need to switch to another project if openshift-storage is the active project.

    For example: 

    $ oc project default
$ oc delete project openshift-storage --wait=true --timeout=5m
    Copy to Clipboard Toggle word wrap

    The project is deleted if the following command returns a NotFound error. 

    $ oc get project openshift-storage
    Copy to Clipboard Toggle word wrap
    Note

    While uninstalling OpenShift Container Storage, if namespace is not deleted completely and remains in Terminating state, perform the steps in Troubleshooting and deleting remaining resources during Uninstall to identify objects that are blocking the namespace from being terminated.

  8. Delete the local storage operator configurations if you have deployed OpenShift Container Storage using local storage devices. See Removing local storage operator configurations.

  9. Unlabel the storage nodes. 

    $ oc label nodes  --all cluster.ocs.openshift.io/openshift-storage-
$ oc label nodes  --all topology.rook.io/rack-
    Copy to Clipboard Toggle word wrap

  10. Remove the OpenShift Container Storage taint if the nodes were tainted. 

    $ oc adm taint nodes --all node.ocs.openshift.io/storage-
    Copy to Clipboard Toggle word wrap

  11. Confirm all PVs provisioned using OpenShift Container Storage are deleted. If there is any PV left in the Released state, delete it. 

    $ oc get pv
$ oc delete pv <pv name>
    Copy to Clipboard Toggle word wrap

  12. Delete the Multicloud Object Gateway storageclass. 

    $ oc delete storageclass openshift-storage.noobaa.io --wait=true --timeout=5m
    Copy to Clipboard Toggle word wrap

  13. Remove CustomResourceDefinitions. 

    $ oc delete crd backingstores.noobaa.io bucketclasses.noobaa.io cephblockpools.ceph.rook.io cephclusters.ceph.rook.io cephfilesystems.ceph.rook.io cephnfses.ceph.rook.io cephobjectstores.ceph.rook.io cephobjectstoreusers.ceph.rook.io noobaas.noobaa.io ocsinitializations.ocs.openshift.io storageclusters.ocs.openshift.io cephclients.ceph.rook.io cephobjectrealms.ceph.rook.io cephobjectzonegroups.ceph.rook.io cephobjectzones.ceph.rook.io cephrbdmirrors.ceph.rook.io --wait=true --timeout=5m
    Copy to Clipboard Toggle word wrap

  14. Optional: To ensure that the vault keys are deleted permanently you need to manually delete the metadata associated with the vault key.

    Note

    Execute this step only if Vault Key/Value (KV) secret engine API, version 2 is used for cluster-wide encryption with Key Management System (KMS) since the vault keys are marked as deleted and not permanently deleted during the uninstallation of OpenShift Container Storage. You can always restore it later if required.

    1. List the keys in the vault. 

      $ vault kv list <backend_path>
      Copy to Clipboard Toggle word wrap
      <backend_path>

      Is the path in the vault where the encryption keys are stored.

      For example: 

      $ vault kv list kv-v2
      Copy to Clipboard Toggle word wrap

      Example output: 

      Keys
-----
NOOBAA_ROOT_SECRET_PATH/
rook-ceph-osd-encryption-key-ocs-deviceset-thin-0-data-0m27q8
rook-ceph-osd-encryption-key-ocs-deviceset-thin-1-data-0sq227
rook-ceph-osd-encryption-key-ocs-deviceset-thin-2-data-0xzszb
      Copy to Clipboard Toggle word wrap

    2. List the metadata associated with the vault key. 

      $ vault kv get kv-v2/<key>
      Copy to Clipboard Toggle word wrap

      For the Multicloud Object Gateway (MCG) key: 

      $ vault kv get kv-v2/NOOBAA_ROOT_SECRET_PATH/<key>
      Copy to Clipboard Toggle word wrap
      <key>

      Is the encryption key.

      For Example: 

      $ vault kv get kv-v2/rook-ceph-osd-encryption-key-ocs-deviceset-thin-0-data-0m27q8
      Copy to Clipboard Toggle word wrap

      Example output: 

      ====== Metadata ======
Key              Value
---              -----
created_time     2021-06-23T10:06:30.650103555Z
deletion_time    2021-06-23T11:46:35.045328495Z
destroyed        false
version          1
      Copy to Clipboard Toggle word wrap

    3. Delete the metadata. 

      $ vault kv metadata delete kv-v2/<key>
      Copy to Clipboard Toggle word wrap

      For the MCG key: 

      $ vault kv metadata delete kv-v2/NOOBAA_ROOT_SECRET_PATH/<key>
      Copy to Clipboard Toggle word wrap
      <key>

      Is the encryption key.

      For Example: 

      $ vault kv metadata delete kv-v2/rook-ceph-osd-encryption-key-ocs-deviceset-thin-0-data-0m27q8
      Copy to Clipboard Toggle word wrap

      Example output: 

      Success! Data deleted (if it existed) at: kv-v2/metadata/rook-ceph-osd-encryption-key-ocs-deviceset-thin-0-data-0m27q8
      Copy to Clipboard Toggle word wrap
    4. Repeat these steps to delete the metadata associated with all the vault keys.

  15. To ensure that OpenShift Container Storage is uninstalled completely, on the OpenShift Container Platform Web Console,

    1. Click Storage.
    2. Verify that Overview no longer appears under Storage.

5.1.1. Removing local storage operator configurations
Copier lien

Use the instructions in this section only if you have deployed OpenShift Container Storage using local storage devices.

Note

For OpenShift Container Storage deployments using only localvolume resources, refer step 8.

Procedure

  1. Identify the LocalVolumeSet and the corresponding StorageClassName being used by OpenShift Container Storage.

  2. Set the variable SC to the StorageClass providing the LocalVolumeSet. 

    $ export SC="<StorageClassName>"
    Copy to Clipboard Toggle word wrap

  3. Delete the LocalVolumeSet. 

    $ oc delete localvolumesets.local.storage.openshift.io <name-of-volumeset> -n openshift-local-storage
    Copy to Clipboard Toggle word wrap

  4. Delete the local storage PVs for the given StorageClassName. 

    $ oc get pv | grep $SC | awk '{print $1}'| xargs oc delete pv
    Copy to Clipboard Toggle word wrap

  5. Delete the StorageClassName. 

    $ oc delete sc $SC
    Copy to Clipboard Toggle word wrap

  6. Delete the symlinks created by the LocalVolumeSet. 

    [[ ! -z $SC ]] && for i in $(oc get node -l cluster.ocs.openshift.io/openshift-storage= -o jsonpath='{ .items[*].metadata.name }'); do oc debug node/${i} -- chroot /host rm -rfv /mnt/local-storage/${SC}/; done
    Copy to Clipboard Toggle word wrap

  7. Delete LocalVolumeDiscovery. 

    $ oc delete localvolumediscovery.local.storage.openshift.io/auto-discover-devices -n openshift-local-storage
    Copy to Clipboard Toggle word wrap

  8. Removing LocalVolume resources (if any).

    Use the following steps to remove the LocalVolume resources used to provision PVs in the current or previous OpenShift Container Storage version. Also, ensure that these resources are not being used by other tenants in the cluster.

    For each of the local volumes, perform the following:

    1. Identify the LocalVolume and the corresponding StorageClassName being used by OpenShift Container Storage.

    2. Set the variable LV to the name of the LocalVolume and variable SC to the name of the StorageClass

      For example: 

      $ LV=local-block
$ SC=localblock
      Copy to Clipboard Toggle word wrap

    3. Delete the local volume resource. 

      $ oc delete localvolume -n local-storage --wait=true $LV
      Copy to Clipboard Toggle word wrap

    4. Delete the remaining PVs and StorageClasses if they exist. 

      $ oc delete pv -l storage.openshift.com/local-volume-owner-name=${LV} --wait --timeout=5m
$ oc delete storageclass $SC --wait --timeout=5m
      Copy to Clipboard Toggle word wrap

    5. Clean up the artifacts from the storage nodes for that resource. 

      $ [[ ! -z $SC ]] && for i in $(oc get node -l cluster.ocs.openshift.io/openshift-storage= -o jsonpath='{ .items[*].metadata.name }'); do oc debug node/${i} -- chroot /host rm -rfv /mnt/local-storage/${SC}/; done
      Copy to Clipboard Toggle word wrap

      Example output: 

      Starting pod/node-xxx-debug ...
To use host binaries, run `chroot /host`
removed '/mnt/local-storage/localblock/nvme2n1'
removed directory '/mnt/local-storage/localblock'

Removing debug pod ...
Starting pod/node-yyy-debug ...
To use host binaries, run `chroot /host`
removed '/mnt/local-storage/localblock/nvme2n1'
removed directory '/mnt/local-storage/localblock'

Removing debug pod ...
Starting pod/node-zzz-debug ...
To use host binaries, run `chroot /host`
removed '/mnt/local-storage/localblock/nvme2n1'
removed directory '/mnt/local-storage/localblock'

Removing debug pod ...
      Copy to Clipboard Toggle word wrap

Use this section to clean up the monitoring stack from OpenShift Container Storage.

The PVCs that are created as a part of configuring the monitoring stack are in the openshift-monitoring namespace.

Prerequisites

Procedure

  1. List the pods and PVCs that are currently running in the openshift-monitoring namespace. 

    $ oc get pod,pvc -n openshift-monitoring
NAME                           READY   STATUS    RESTARTS   AGE
pod/alertmanager-main-0         3/3     Running   0          8d
pod/alertmanager-main-1         3/3     Running   0          8d
pod/alertmanager-main-2         3/3     Running   0          8d
pod/cluster-monitoring-
operator-84457656d-pkrxm        1/1     Running   0          8d
pod/grafana-79ccf6689f-2ll28    2/2     Running   0          8d
pod/kube-state-metrics-
7d86fb966-rvd9w                 3/3     Running   0          8d
pod/node-exporter-25894         2/2     Running   0          8d
pod/node-exporter-4dsd7         2/2     Running   0          8d
pod/node-exporter-6p4zc         2/2     Running   0          8d
pod/node-exporter-jbjvg         2/2     Running   0          8d
pod/node-exporter-jj4t5         2/2     Running   0          6d18h
pod/node-exporter-k856s         2/2     Running   0          6d18h
pod/node-exporter-rf8gn         2/2     Running   0          8d
pod/node-exporter-rmb5m         2/2     Running   0          6d18h
pod/node-exporter-zj7kx         2/2     Running   0          8d
pod/openshift-state-metrics-
59dbd4f654-4clng                3/3     Running   0          8d
pod/prometheus-adapter-
5df5865596-k8dzn                1/1     Running   0          7d23h
pod/prometheus-adapter-
5df5865596-n2gj9                1/1     Running   0          7d23h
pod/prometheus-k8s-0            6/6     Running   1          8d
pod/prometheus-k8s-1            6/6     Running   1          8d
pod/prometheus-operator-
55cfb858c9-c4zd9                1/1     Running   0          6d21h
pod/telemeter-client-
78fc8fc97d-2rgfp                3/3     Running   0          8d

NAME                                                              STATUS   VOLUME                                     CAPACITY   ACCESS MODES   STORAGECLASS                  AGE
persistentvolumeclaim/my-alertmanager-claim-alertmanager-main-0   Bound    pvc-0d519c4f-15a5-11ea-baa0-026d231574aa   40Gi       RWO            ocs-storagecluster-ceph-rbd   8d
persistentvolumeclaim/my-alertmanager-claim-alertmanager-main-1   Bound    pvc-0d5a9825-15a5-11ea-baa0-026d231574aa   40Gi       RWO            ocs-storagecluster-ceph-rbd   8d
persistentvolumeclaim/my-alertmanager-claim-alertmanager-main-2   Bound    pvc-0d6413dc-15a5-11ea-baa0-026d231574aa   40Gi       RWO            ocs-storagecluster-ceph-rbd   8d
persistentvolumeclaim/my-prometheus-claim-prometheus-k8s-0        Bound    pvc-0b7c19b0-15a5-11ea-baa0-026d231574aa   40Gi       RWO            ocs-storagecluster-ceph-rbd   8d
persistentvolumeclaim/my-prometheus-claim-prometheus-k8s-1        Bound    pvc-0b8aed3f-15a5-11ea-baa0-026d231574aa   40Gi       RWO            ocs-storagecluster-ceph-rbd   8d
    Copy to Clipboard Toggle word wrap

  2. Edit the monitoring configmap. 

    $ oc -n openshift-monitoring edit configmap cluster-monitoring-config
    Copy to Clipboard Toggle word wrap

  3. Remove any config sections that reference the OpenShift Container Storage storage classes as shown in the following example and save it.

    Before editing

    Expand
    .
.
.
apiVersion: v1
data:
  config.yaml: |
    alertmanagerMain:
      volumeClaimTemplate:
        metadata:
          name: my-alertmanager-claim
        spec:
          resources:
            requests:
              storage: 40Gi
          storageClassName: ocs-storagecluster-ceph-rbd
    prometheusK8s:
      volumeClaimTemplate:
        metadata:
          name: my-prometheus-claim
        spec:
          resources:
            requests:
              storage: 40Gi
          storageClassName: ocs-storagecluster-ceph-rbd
kind: ConfigMap
metadata:
  creationTimestamp: "2019-12-02T07:47:29Z"
  name: cluster-monitoring-config
  namespace: openshift-monitoring
  resourceVersion: "22110"
  selfLink: /api/v1/namespaces/openshift-monitoring/configmaps/cluster-monitoring-config
  uid: fd6d988b-14d7-11ea-84ff-066035b9efa8
.
.
.
    Copy to Clipboard Toggle word wrap

    After editing

    Expand
    .
.
.
apiVersion: v1
data:
  config.yaml: |
kind: ConfigMap
metadata:
  creationTimestamp: "2019-11-21T13:07:05Z"
  name: cluster-monitoring-config
  namespace: openshift-monitoring
  resourceVersion: "404352"
  selfLink: /api/v1/namespaces/openshift-monitoring/configmaps/cluster-monitoring-config
  uid: d12c796a-0c5f-11ea-9832-063cd735b81c
.
.
.
    Copy to Clipboard Toggle word wrap

    In this example, alertmanagerMain and prometheusK8s monitoring components are using the OpenShift Container Storage PVCs.

  4. Delete relevant PVCs. Make sure you delete all the PVCs that are consuming the storage classes. 

    $ oc delete -n openshift-monitoring pvc <pvc-name> --wait=true --timeout=5m
    Copy to Clipboard Toggle word wrap

Use this section to clean up OpenShift Container Platform registry from OpenShift Container Storage. If you want to configure an alternative storage, see image registry

The PVCs that are created as a part of configuring OpenShift Container Platform registry are in the openshift-image-registry namespace.

Prerequisites

  • The image registry should have been configured to use an OpenShift Container Storage PVC.

Procedure

  1. Edit the configs.imageregistry.operator.openshift.io object and remove the content in the storage section. 

    $ oc edit configs.imageregistry.operator.openshift.io
    Copy to Clipboard Toggle word wrap
    Expand

    Before editing 

    .
.
.
storage:
  pvc:
    claim: registry-cephfs-rwx-pvc
.
.
.
    Copy to Clipboard Toggle word wrap

    After editing 

    .
.
.
storage:
  emptyDir: {}
.
.
.
    Copy to Clipboard Toggle word wrap

    In this example, the PVC is called registry-cephfs-rwx-pvc, which is now safe to delete.

  2. Delete the PVC. 

    $ oc delete pvc <pvc-name> -n openshift-image-registry --wait=true --timeout=5m
    Copy to Clipboard Toggle word wrap

To clean the cluster logging operator from the OpenShift Container Storage, follow the steps in the procedure.

The PVCs created as a part of configuring cluster logging operator are in the openshift-logging namespace.

Prerequisites

  • The cluster logging instance must be configured to use OpenShift Container Storage PVCs.

Procedure

  1. Remove the ClusterLogging instance in the namespace. 

    $ oc delete clusterlogging instance -n openshift-logging --wait=true --timeout=5m
    Copy to Clipboard Toggle word wrap

    The PVCs in the openshift-logging namespace are now safe to delete.

  2. Delete PVCs. 

    $ oc delete pvc <pvc-name> -n openshift-logging --wait=true --timeout=5m
    Copy to Clipboard Toggle word wrap
Retour au début
Red Hat logoGithubredditYoutubeTwitter

Apprendre

Essayez, achetez et vendez

Communautés

À propos de la documentation Red Hat

Nous aidons les utilisateurs de Red Hat à innover et à atteindre leurs objectifs grâce à nos produits et services avec un contenu auquel ils peuvent faire confiance. Découvrez nos récentes mises à jour.

Rendre l’open source plus inclusif

Red Hat s'engage à remplacer le langage problématique dans notre code, notre documentation et nos propriétés Web. Pour plus de détails, consultez le Blog Red Hat.

À propos de Red Hat

Nous proposons des solutions renforcées qui facilitent le travail des entreprises sur plusieurs plates-formes et environnements, du centre de données central à la périphérie du réseau.

Theme

© 2025 Red Hat