Appendix A. Network Environment Options

InternalApiNetCidr

The network and subnet for the Internal API network

172.17.0.0/24

StorageNetCidr

The network and subnet for the Storage network

StorageMgmtNetCidr

The network and subnet for the Storage Management network

TenantNetCidr

The network and subnet for the Tenant network

ExternalNetCidr

The network and subnet for the External network

InternalApiAllocationPools

The allocation pool for the Internal API network in a tuple format

[{start: 172.17.0.10, end: 172.17.0.200}]

StorageAllocationPools

The allocation pool for the Storage network in a tuple format

StorageMgmtAllocationPools

The allocation pool for the Storage Management network in a tuple format

TenantAllocationPools

The allocation pool for the Tenant network in a tuple format

ExternalAllocationPools

The allocation pool for the External network in a tuple format

InternalApiNetworkVlanID

The VLAN ID for the Internal API network

200

StorageNetworkVlanID

The VLAN ID for the Storage network

StorageMgmtNetworkVlanID

The VLAN ID for the Storage Management network

TenantNetworkVlanID

The VLAN ID for the Tenant network

ExternalNetworkVlanID

The VLAN ID for the External network

ExternalInterfaceDefaultRoute

The gateway IP address for the External network

10.1.2.1

ControlPlaneDefaultRoute

Gateway router for the Provisioning network (or Undercloud IP)

ControlPlaneDefaultRoute: 192.0.2.254

ControlPlaneSubnetCidr

CIDR subnet mask length for provisioning network

ControlPlaneSubnetCidr: 24

EC2MetadataIp

The IP address of the EC2 metadata server. Generally the IP of the Undercloud.

EC2MetadataIp: 192.0.2.1

DnsServers

Define the DNS servers for the Overcloud nodes. Include a maximum of two.

DnsServers: ["8.8.8.8","8.8.4.4"]

BondInterfaceOvsOptions

The options for bonding interfaces

BondInterfaceOvsOptions:"bond_mode=balance-slb"

NeutronFlatNetworks

Defines the flat networks to configure in neutron plugins. Defaults to "datacentre" to permit external network creation

NeutronFlatNetworks: "datacentre"

NeutronExternalNetworkBridge

An Open vSwitch bridge to create on each hypervisor. Typically, this should not need to be changed.

NeutronExternalNetworkBridge: "''"

NeutronBridgeMappings

The logical to physical bridge mappings to use. Defaults to mapping the external bridge on hosts (br-ex) to a physical name (datacentre). You would use this for the default floating network

NeutronBridgeMappings: "datacentre:br-ex"

NeutronPublicInterface

Defines the interface to bridge onto br-ex for network nodes

NeutronPublicInterface: "eth0"

NeutronNetworkType

The tenant network type for Neutron

NeutronNetworkType: "vxlan"

NeutronTunnelTypes

The tunnel types for the neutron tenant network. To specify multiple values, use a comma separated string.

NeutronTunnelTypes: gre,vxlan

NeutronTunnelIdRanges

Ranges of GRE tunnel IDs to make available for tenant network allocation

NeutronTunnelIdRanges "1:1000"

NeutronVniRanges

Ranges of VXLAN VNI IDs to make available for tenant network allocation

NeutronVniRanges: "1:1000"

NeutronEnableTunnelling

Defines whether to enable or disable tunneling in case you aim to use a VLAN segmented network or flat network with Neutron. Defaults to enabled

NeutronNetworkVLANRanges

The neutron ML2 and Open vSwitch VLAN mapping range to support. Defaults to permitting any VLAN on the datacentre physical network.

NeutronNetworkVLANRanges: "datacentre:1:1000"

NeutronMechanismDrivers

The mechanism drivers for the neutron tenant network. Defaults to "openvswitch". To specify multiple values, use a comma-separated string

NeutronMechanismDrivers: openvswitch,l2population