SupportConsoleDéveloppeursCommencer un essaiContact

Ce contenu n'est pas disponible dans la langue sélectionnée.

Chapter 16. Open Container Initiative support

Container registries were originally designed to support container images in the Docker image format. To promote the use of additional runtimes apart from Docker, the Open Container Initiative (OCI) was created to provide a standardization surrounding container runtimes and image formats. Most container registries support the OCI standardization as it is based on the Docker image manifest V2, Schema 2 format.

In addition to container images, a variety of artifacts have emerged that support not just individual applications, but also the Kubernetes platform as a whole. These range from Open Policy Agent (OPA) policies for security and governance to Helm charts and Operators that aid in application deployment.

Red Hat Quay is a private container registry that not only stores container images, but also supports an entire ecosystem of tooling to aid in the management of containers. Red Hat Quay strives to be as compatible as possible with the OCI 1.1 Image and Distribution specifications, and supports common media types like Helm charts (as long as they pushed with a version of Helm that supports OCI) and a variety of arbitrary media types within the manifest or layer components of container images. Support for OCI media types differs from previous iterations of Red Hat Quay, when the registry was more strict about accepted media types. Because Red Hat Quay now works with a wider array of media types, including those that were previously outside the scope of its support, it is now more versatile accommodating not only standard container image formats but also emerging or unconventional types.

In addition to its expanded support for novel media types, Red Hat Quay ensures compatibility with Docker images, including V2_2 and V2_1 formats. This compatibility with Docker V2_2 and V2_1 images demonstrates Red Hat Quay’s' commitment to providing a seamless experience for Docker users. Moreover, Red Hat Quay continues to extend its support for Docker V1 pulls, catering to users who might still rely on this earlier version of Docker images.

Support for OCI artifacts are enabled by default. The following examples show you how to use some some media types, which can be used as examples for using other OCI media types.

16.1. Helm and OCI prerequisites

Helm simplifies how applications are packaged and deployed. Helm uses a packaging format called Charts which contain the Kubernetes resources representing an application. Red Hat Quay supports Helm charts so long as they are a version supported by OCI.

Use the following procedures to pre-configure your system to use Helm and other OCI media types.

The most recent version of Helm can be downloaded from the Helm releases page. After you have downloaded Helm, you must enable your system to trust SSL/TLS certificates used by Red Hat Quay.

16.1.1. Enabling your system to trust SSL/TLS certificates used by Red Hat Quay

Communication between the Helm client and Red Hat Quay is facilitated over HTTPS. As of Helm 3.5, support is only available for registries communicating over HTTPS with trusted certificates. In addition, the operating system must trust the certificates exposed by the registry. You must ensure that your operating system has been configured to trust the certificates used by Red Hat Quay. Use the following procedure to enable your system to trust the custom certificates.

Procedure

  1. Enter the following command to copy the rootCA.pem file to the /etc/pki/ca-trust/source/anchors/ folder: 

    $ sudo cp rootCA.pem   /etc/pki/ca-trust/source/anchors/

  2. Enter the following command to update the CA trust store: 

    $ sudo update-ca-trust extract

16.2. Using Helm charts

Use the following example to download and push an etherpad chart from the Red Hat Community of Practice (CoP) repository.

Prerequisites

  • You have logged into Red Hat Quay.

Procedure

  1. Add a chart repository by entering the following command: 

    $ helm repo add redhat-cop https://redhat-cop.github.io/helm-charts

  2. Enter the following command to update the information of available charts locally from the chart repository: 

    $ helm repo update

  3. Enter the following command to pull a chart from a repository: 

    $ helm pull redhat-cop/etherpad --version=0.0.4 --untar

  4. Enter the following command to package the chart into a chart archive: 

    $ helm package ./etherpad

    Example output 

    Successfully packaged chart and saved it to: /home/user/linux-amd64/etherpad-0.0.4.tgz

  5. Log in to Red Hat Quay using helm registry login: 

    $ helm registry login quay370.apps.quayperf370.perfscale.devcluster.openshift.com

  6. Push the chart to your repository using the helm push command: 

    $ helm push etherpad-0.0.4.tgz oci://quay370.apps.quayperf370.perfscale.devcluster.openshift.com

    Example output: 

    Pushed: quay370.apps.quayperf370.perfscale.devcluster.openshift.com/etherpad:0.0.4
Digest: sha256:a6667ff2a0e2bd7aa4813db9ac854b5124ff1c458d170b70c2d2375325f2451b

  7. Ensure that the push worked by deleting the local copy, and then pulling the chart from the repository: 

    $ rm -rf etherpad-0.0.4.tgz
    $ helm pull oci://quay370.apps.quayperf370.perfscale.devcluster.openshift.com/etherpad --version 0.0.4

    Example output: 

    Pulled: quay370.apps.quayperf370.perfscale.devcluster.openshift.com/etherpad:0.0.4
Digest: sha256:4f627399685880daf30cf77b6026dc129034d68c7676c7e07020b70cf7130902

16.3. Annotation parsing

Some OCI media types do not utilize labels and, as such, critical information such as expiration timestamps are not included. Red Hat Quay supports metadata passed through annotations to accommodate OCI media types that do not include these labels for metadata transmission. Tools such as ORAS (OCI Registry as Storage) can now be used to embed information with artifact types to help ensure that images operate properly, for example, to expire.

The following procedure uses ORAS to add an expiration date to an OCI media artifact.

Important

If you pushed an image with podman push, and then add an annotation with oras, the MIME type is changed. Consequently, you will not be able to pull the same image with podman pull because Podman does not recognize that MIME type.

Prerequisites

  • You have downloaded the oras CLI. For more information, see Installation.
  • You have pushed an OCI media artifact to your Red Hat Quay repository.

Procedure

  • By default, some OCI media types, like application/vnd.oci.image.manifest.v1+json, do not use certain labels, like expiration timestamps. You can use a CLI tool like ORAS (oras) to add annotations to OCI media types. For example: 

    $ oras push --annotation "quay.expires-after=2d" \ 1
--annotation "expiration = 2d" \ 2
quay.io/<organization_name>/<repository>/<image_name>:<tag>
    1
    Set the expiration time for 2 days, indicated by 2d.
    2
    Adds the expiration label.

    Example output

    ✓ Exists    application/vnd.oci.empty.v1+json                                                                                   2/2  B 100.00%     0s
  └─ sha256:44136fa355b3678a1146ad16f7e8649e94fb4fc21fe77e8310c060f61caaff8a
✓ Uploaded  application/vnd.oci.image.manifest.v1+json                                                                      561/561  B 100.00%  511ms
  └─ sha256:9b4f2d43b62534423894d077f0ff0e9e496540ec8b52b568ea8b757fc9e7996b
Pushed [registry] quay.io/stevsmit/testorg3/oci-image:v1
ArtifactType: application/vnd.unknown.artifact.v1
Digest: sha256:9b4f2d43b62534423894d077f0ff0e9e496540ec8b52b568ea8b757fc9e7996b

Verification

  1. Pull the image with oras. For example: 

    $ oras pull quay.io/<organization_name>/<repository>/<image_name>:<tag>

  2. Inspect the changes using oras. For example: 

    $ oras manifest fetch quay.io/<organization_name>/<repository>/<image_name>:<tag>

    Example output

    {"schemaVersion":2,"mediaType":"application/vnd.oci.image.manifest.v1+json","artifactType":"application/vnd.unknown.artifact.v1","config":{"mediaType":"application/vnd.oci.empty.v1+json","digest":"sha256:44136fa355b3678a1146ad16f7e8649e94fb4fc21fe77e8310c060f61caaff8a","size":2,"data":"e30="},"layers":[{"mediaType":"application/vnd.oci.empty.v1+json","digest":"sha256:44136fa355b3678a1146ad16f7e8649e94fb4fc21fe77e8310c060f61caaff8a","size":2,"data":"e30="}],"annotations":{"org.opencontainers.image.created":"2024-07-11T15:22:42Z","version ":" 8.11"}}

16.4. Attaching referrers to an image tag

The following procedure shows you how to attach referrers to an image tag using different schemas supported by the OCI distribution spec 1.1 using the oras CLI. This is useful for attaching and managing additional metadata like referrers to container images.

Prerequisites

  • You have downloaded the oras CLI. For more information, see Installation.
  • You have access to an OCI media artifact.

Procedure

  1. Tag an OCI media artifact by entering the following command: 

    $ podman tag <myartifact_image> <quay-server.example.com>/<organization_name>/<repository>/<image_name>:<tag>

  2. Push the artifact to your Red Hat Quay registry. For example: 

    $ podman push <myartifact_image> <quay-server.example.com>/<organization_name>/<repository>/<image_name>:<tag>

  3. Enter the following command to attach a manifest using the OCI 1.1 referrers API schema with oras: 

    $ oras attach --artifact-type <MIME_type> --distribution-spec v1.1-referrers-api <myartifact_image> \
<quay-server.example.com>/<organization_name>/<repository>/<image_name>:<tag> \
<example_file>.txt

    Example output

    -spec v1.1-referrers-api quay.io/testorg3/myartifact-image:v1.0 hi.txt
✓ Exists    hi.txt                                                               3/3  B 100.00%     0s
  └─ sha256:98ea6e4f216f2fb4b69fff9b3a44842c38686ca685f3f55dc48c5d3fb1107be4
✓ Exists    application/vnd.oci.empty.v1+json                                    2/2  B 100.00%     0s
  └─ sha256:44136fa355b3678a1146ad16f7e8649e94fb4fc21fe77e8310c060f61caaff8a
✓ Uploaded  application/vnd.oci.image.manifest.v1+json                       723/723  B 100.00%  677ms
  └─ sha256:31c38e6adcc59a3cfbd2ef971792aaf124cbde8118e25133e9f9c9c4cd1d00c6
Attached to [registry] quay.io/testorg3/myartifact-image@sha256:db440c57edfad40c682f9186ab1c1075707ce7a6fdda24a89cb8c10eaad424da
Digest: sha256:31c38e6adcc59a3cfbd2ef971792aaf124cbde8118e25133e9f9c9c4cd1d00c6

  4. Enter the following command to attach a manifest using the OCI 1.1 referrers tag schema: 

    $ oras attach --artifact-type <MIME_type> --distribution-spec v1.1-referrers-tag \
<myartifact_image> <quay-server.example.com>/<organization_name>/<repository>/<image_name>:<tag> \
<example_file>.txt

    Example output

    ✓ Exists    hi.txt                                                             3/3  B 100.00%     0s
  └─ sha256:98ea6e4f216f2fb4b69fff9b3a44842c38686ca685f3f55dc48c5d3fb1107be4
✓ Exists    application/vnd.oci.empty.v1+json                                  2/2  B 100.00%     0s
  └─ sha256:44136fa355b3678a1146ad16f7e8649e94fb4fc21fe77e8310c060f61caaff8a
✓ Uploaded  application/vnd.oci.image.manifest.v1+json                     723/723  B 100.00%  465ms
  └─ sha256:2d4b54201c8b134711ab051389f5ba24c75c2e6b0f0ff157fce8ffdfe104f383
Attached to [registry] quay.io/testorg3/myartifact-image@sha256:db440c57edfad40c682f9186ab1c1075707ce7a6fdda24a89cb8c10eaad424da
Digest: sha256:2d4b54201c8b134711ab051389f5ba24c75c2e6b0f0ff157fce8ffdfe104f383

  5. Enter the following command to discoverer referrers of the artifact using the tag schema: 

    $ oras discover --insecure --distribution-spec v1.1-referrers-tag \
<quay-server.example.com>/<organization_name>/<repository>/<image_name>:<tag>

    Example output

    quay.io/testorg3/myartifact-image@sha256:db440c57edfad40c682f9186ab1c1075707ce7a6fdda24a89cb8c10eaad424da
└── doc/example
    └── sha256:2d4b54201c8b134711ab051389f5ba24c75c2e6b0f0ff157fce8ffdfe104f383

  6. Enter the following command to discoverer referrers of the artifact using the API schema: 

    $ oras discover --distribution-spec v1.1-referrers-api \
<quay-server.example.com>/<organization_name>/<repository>/<image_name>:<tag>

    Example output

    Discovered 3 artifacts referencing v1.0
Digest: sha256:db440c57edfad40c682f9186ab1c1075707ce7a6fdda24a89cb8c10eaad424da

Artifact Type   Digest
                sha256:2d4b54201c8b134711ab051389f5ba24c75c2e6b0f0ff157fce8ffdfe104f383
                sha256:22b7e167793808f83db66f7d35fbe0088b34560f34f8ead36019a4cc48fd346b
                sha256:bb2b7e7c3a58fd9ba60349473b3a746f9fe78995a88cb329fc2fd1fd892ea4e4

  7. Optional. You can also discover referrers by using the /v2/<organization_name>/<repository_name>/referrers/<sha256_digest> endpoint. For this to work, you must generate a v2 API token and set FEATURE_REFERRERS_API: true in your config.yaml file.

    1. Update your config.yaml file to include the FEATURE_REFERRERS_API field. For example: 

      # ...
FEATURE_REFERRERS_API: true
# ...

    2. Enter the following command to Base64 encode your credentials: 

      $ echo -n '<username>:<password>' | base64

      Example output

      abcdeWFkbWluOjE5ODlraWROZXQxIQ==

    3. Enter the following command to use the base64 encoded token and modify the URL endpoint to your Red Hat Quay server: 

      $ curl --location '<quay-server.example.com>/v2/auth?service=<quay-server.example.com>&scope=repository:quay/listocireferrs:pull,push' --header 'Authorization: Basic <base64_username:password_encode_token>' -k | jq

      Example output

      {
  "token": "eyJhbGciOiJSUzI1NiIsImtpZCI6Ijl5RWNtWmdiZ0l6czBBZW16emhTMHM1R0g2RDJnV2JGUTdUNGZYand4MlUiLCJ0eXAiOiJKV1QifQ..."
}

  8. Enter the following command, using the v2 API token, to list OCI referrers of a manifest under a repository: 

    $ GET https://<quay-server.example.com>/v2/<organization_name>/<repository_name>/referrers/sha256:0de63ba2d98ab328218a1b6373def69ec0d0e7535866f50589111285f2bf3fb8
--header 'Authorization: Bearer <v2_bearer_token> -k | jq

    Example output

    {
  "schemaVersion": 2,
  "mediaType": "application/vnd.oci.image.index.v1+json",
  "manifests": [
    {
      "mediaType": "application/vnd.oci.image.manifest.v1+json",
      "digest": "sha256:2d4b54201c8b134711ab051389f5ba24c75c2e6b0f0ff157fce8ffdfe104f383",
      "size": 793
    },
  ]
}

Red Hat logoGithubRedditYoutubeTwitter

Apprendre

Essayez, achetez et vendez

Communautés

À propos de la documentation Red Hat

Nous aidons les utilisateurs de Red Hat à innover et à atteindre leurs objectifs grâce à nos produits et services avec un contenu auquel ils peuvent faire confiance.

Rendre l’open source plus inclusif

Red Hat s'engage à remplacer le langage problématique dans notre code, notre documentation et nos propriétés Web. Pour plus de détails, consultez leBlog Red Hat.

À propos de Red Hat

Nous proposons des solutions renforcées qui facilitent le travail des entreprises sur plusieurs plates-formes et environnements, du centre de données central à la périphérie du réseau.

© 2024 Red Hat, Inc.