Ce contenu n'est pas disponible dans la langue sélectionnée.

Chapter 4. Skupper Camel Integration Example

Twitter, Telegram and PostgreSQL integration routes deployed across Kubernetes clusters using Skupper

This example is part of a suite of examples showing the different ways you can use Skupper to connect services across cloud providers, data centers, and edge sites.

Overview

In this example we can see how to integrate different Camel integration routers that can be deployed across multiple Kubernetes clusters using Skupper.

The main idea of this project is to show a Camel integration deployed in a public cluster which searches tweets that contain the word 'skupper'. Those results are sent to a private cluster that has a database deployed. A third public cluster will ping the database and send new results to a Telegram channel.

In order to run this example you will need to create a Telegram channel and a Twitter Account to use its credentials.

It contains the following components:

A Twitter Camel integration that searches in the Twitter feed for results containing the word skupper (public).
A PostgreSQL Camel sink that receives the data from the Twitter Camel router and sends it to the database (public).
A PostgreSQL database that contains the results (private).
A Telegram Camel integration that polls the database and sends the results to a Telegram channel (public).

Prerequisites

The kubectl command-line tool, version 1.15 or later
The skupper command-line tool, the latest version
Access to at least one Kubernetes cluster, from any provider you choose
Kamel installation to deploy the Camel integrations per namespace.
```
kamel install
```
A Twitter Developer Account in order to use the Twiter API (you need to add the credentials in config.properties file)
Create a Telegram Bot and Channel to publish messages (you need to add the credentials in config.properties file)

Procedure

Configure separate console sessions
Access your clusters
Set up your namespaces
Install Skupper in your namespaces
Check the status of your namespaces
Link your namespaces
Deploy and expose the database in the private cluster
Create the table to store the tweets
Deploy Twitter Camel Integration in the public cluster
Deploy Telegram Camel integration in the public cluster
Test the application
1. Configure separate console sessions
  Skupper is designed for use with multiple namespaces, typically on different clusters. The skupper command uses your kubeconfig and current context to select the namespace where it operates.
  Your kubeconfig is stored in a file in your home directory. The skupper and kubectl commands use the KUBECONFIG environment variable to locate it.
  A single kubeconfig supports only one active context per user. Since you will be using multiple contexts at once in this exercise, you need to create distinct kubeconfigs.
  Start a console session for each of your namespaces. Set the KUBECONFIG environment variable to a different path in each session.
  Console for private1:
```
export KUBECONFIG=~/.kube/config-private1
```
  Console for public1:
```
export KUBECONFIG=~/.kube/config-public1
```
  Console for public2:
```
export KUBECONFIG=~/.kube/config-public2
```
2. Access your clusters
  The methods for accessing your clusters vary by Kubernetes provider. Find the instructions for your chosen providers and use them to authenticate and configure access for each console session. See the following links for more information:
3. Set up your namespaces
  Use kubectl create namespace to create the namespaces you wish to use (or use existing namespaces). Use kubectl config set-context to set the current namespace for each session.
  Console for private1:
```
kubectl create namespace private1
kubectl config set-context --current --namespace private1
```
  Console for public1:
```
kubectl create namespace public1
kubectl config set-context --current --namespace public1
```
  Console for public2:
```
kubectl create namespace public2
kubectl config set-context --current --namespace public2
```
4. Install Skupper in your namespaces
  The skupper init command installs the Skupper router and service controller in the current namespace. Run the skupper init command in each namespace.
  Console for private1:
```
skupper init
```
  Console for public1:
```
skupper init
```
  Console for public2:
```
skupper init
```
5. Check the status of your namespaces
  Use skupper status in each console to check that Skupper is installed.
  Console for private1:
```
skupper status
```
  Console for public1:
```
skupper status
```
  Console for public2:
```
skupper status
```
  You should see output like this for each namespace:
```
Skupper is enabled for namespace "<namespace>" in interior mode. It is not connected to any other sites. It has no exposed services.
The site console url is: http://<address>:8080
The credentials for internal console-auth mode are held in secret: 'skupper-console-users'
```
  As you move through the steps below, you can use skupper status at any time to check your progress.
6. Link your namespaces
  Creating a link requires use of two skupper commands in conjunction, skupper token create and skupper link create.
  The skupper token create command generates a secret token that signifies permission to create a link. The token also carries the link details. Then, in a remote namespace, The skupper link create command uses the token to create a link to the namespace that generated it.
  Note
  The link token is truly a secret. Anyone who has the token can link to your namespace. Make sure that only those you trust have access to it.
  First, use skupper token create in one namespace to generate the token. Then, use skupper link create in the other to create a link.
  Console for public1:
```
skupper token create ~/public1.token --uses 2
```
  Console for public2:
```
skupper link create ~/public1.token
skupper link status --wait 30
skupper token create ~/public2.token
```
  Console for private1:
```
skupper link create ~/public1.token
skupper link create ~/public2.token
skupper link status --wait 30
```
  If your console sessions are on different machines, you may need to use scp or a similar tool to transfer the token.
7. Deploy and expose the database in the private cluster
  Use kubectl apply to deploy the database in private1. Then expose the deployment.
  Console for private1:
```
kubectl create -f src/main/resources/database/postgres-svc.yaml
skupper expose deployment postgres --address postgres --port 5432 -n private1
```
8. Create the table to store the tweets
  Console for private1:
```
kubectl run pg-shell -i --tty --image quay.io/skupper/simple-pg --env="PGUSER=postgresadmin" --env="PGPASSWORD=admin123" --env="PGHOST=$(kubectl get service postgres -o=jsonpath='{.spec.clusterIP}')" -- bash
psql --dbname=postgresdb
CREATE EXTENSION IF NOT EXISTS "uuid-ossp";
CREATE TABLE tw_feedback (id uuid DEFAULT uuid_generatev4 (),sigthning VARCHAR(255),created TIMESTAMP default CURRENTTIMESTAMP,PRIMARY KEY(id));
```
9. Deploy Twitter Camel Integration in the public cluster
  First, we need to deploy the TwitterRoute component in Kubernetes by using kamel. This component will poll Twitter every 5000 ms for tweets that include the word skupper. Subsequently, it will send the results to the postgresql-sink, that should be installed in the same cluster as well. The kamelet sink will insert the results in the postgreSQL database.
  Console for public1:
```
src/main/resources/scripts/setUpPublic1Cluster.sh
```
10. Deploy Telegram Camel integration in the public cluster
  In this step we will install the secret in Kubernetes that contains the database credentials, in order to be used by the TelegramRoute component. After that we will deploy TelegramRoute using kamel in the Kubernetes cluster. This component will poll the database every 3 seconds and gather the results inserted during the last 3 seconds.
  Console for public2:
```
src/main/resources/scripts/setUpPublic2Cluster.sh
```
11. Test the application
  To be able to see the whole flow at work, you need to post a tweet containing the word skupper and after that you will see a new message in the Telegram channel with the title New feedback about Skupper
  Console for private1:
```
kubectl attach pg-shell -c pg-shell -i -t
psql --dbname=postgresdb
SELECT * FROM twfeedback;
```
  Sample output:
```
id                                    | sigthning       |          created
--------------------------------------+-----------------+----------------------------
 95655229-747a-4787-8133-923ef0a1b2ca | Testing skupper | 2022-03-10 19:35:08.412542
```
  Console for public1:
```
kamel logs twitter-route
```
  Sample output:
```
"[1] 2022-03-10 19:35:08,397 INFO  [postgresql-sink-1] (Camel (camel-1) thread #0 - twitter-search://skupper) Testing skupper"
```

Ce contenu n'est pas disponible dans la langue sélectionnée.

Chapter 4. Skupper Camel Integration Example

Apprendre

Essayez, achetez et vendez

Communautés

À propos de la documentation Red Hat

Rendre l’open source plus inclusif

À propos de Red Hat

Red Hat legal and privacy links

Red Hat legal and privacy links