Questo contenuto non è disponibile nella lingua selezionata.

Appendix A. Boot Devices

Automated installation (or kickstart) is an essential part of efficient system provisioning. This appendix describes how to prepare different types of boot media for use with kickstarting clients.

The Red Hat Enterprise Linux CD boot image boot.iso is a required prerequisite for creating boot devices. Make sure that this is available somewhere on the system and take note of its location.

Important

Install the syslinux and syslinux-extlinux packages to use the following procedures.

# yum install syslinux syslinux-extlinux

The syslinux package installs files in /usr/share/syslinux/ for Red Hat Enterprise Linux 6. If using Red Hat Enterprise Linux 5, substitute this directory with /usr/lib/syslinux/.

The syslinux-extlinux package installs tools for USB boot media creation.

Procedure A.1. CD and DVD Boot Media

Note

The backslash "\" is used below to represent a continuation of one line at the shell prompt.

Create a working directory for the boot image:
```
# mkdir -p temp cd/isolinux
```
Mount the boot image to the temp directory:
```
# mount -o loop boot.iso temp
```
Copy the required files for a Boot Media device to the previously created directory:
```
# cp -aP temp/isolinux/* cd/isolinux/
```
Unmount the temp directory and change the permissions on the cd directory to be readable and writable to the user:
```
# umount temp
# chmod -R u+rw cd
```
Change to the ./cd directory:
```
# cd ./cd
```
Copy the /usr/share/syslinux/menu.c32 file to the ./cd directory:
```
# cp -p /usr/share/syslinux/menu.c32 isolinux
```
Customize any boot parameters and targets in isolinux.cfg as needed for CD booting.

Use the mkisofs to create an ISO to burn to a CD or DVD.

# mkisofs -o ./custom-boot.iso -b isolinux/isolinux.bin -c isolinux/boot.cat -no-emul-boot \
    -boot-load-size 4 -boot-info-table -J -l -r -T -v -V "Custom Red Hat Enterprise Linux Boot" .

Burn the directory to a CD or DVD to complete the procedure.

Procedure A.2. PXE Boot

Create a working directory for the boot image:
```
# mkdir -p temp pxe/pxelinux.cfg
```
Mount the boot image to the temp directory:
```
# mount -o loop boot.iso temp
```
Copy the required files for a PXE Boot device to the previously created directory:
```
# cp -aP temp/isolinux/* pxe/
```
Unmount the temp directory and change the permissions on the cd directory to be readable and writable to the user:
```
# umount temp
# chmod -R u+rw pxe
```
Change to the /pxe directory:
```
# cd ./pxe
```
Copy the /usr/share/syslinux/menu.c32 file to the /pxe directory:
```
# cp -p /usr/share/syslinux/menu.c32 .
```
Move the isolinux.cfg file to pxelinux.cfg/default:
```
# mv isolinux.cfg pxelinux.cfg/default
```
Remove the temporary files:
```
# rm -f isolinux.bin TRANS.TBL
```
Copy the /usr/share/syslinux/pxelinux.0 file to the /pxe directory:
```
# cp -p /usr/share/syslinux/pxelinux.0 .
```
Open the pxelinux.cfg/default file in your preferred text editor, and customize any boot parameters and targets as needed for PXE booting.

Procedure A.3. USB Boot Media

Warning

Be extremely careful when carrying out these command as root (required for most critical parts). These commands access device files and using them incorrectly could irrecoverably damage your system. The example below uses /dev/loop0 for mounting, make sure you use the correct device for your system. You can check which is the correct device using the losetup -f command.

Create a working directory for the boot image:
```
# mkdir -p temp usb/extlinux
```
Mount the boot image to the temp directory:
```
# mount -o loop boot.iso temp
```
Copy the required files for a USB Media Boot device to the previously created directory:
```
# cp -aP temp/isolinux/* usb/extlinux/
```
Unmount the temp directory and change the permissions on the cd directory to be readable and writable to the user:
```
# umount temp
# chmod -R u+rw usb
```
Copy the /usr/share/syslinux/menu.c32 file to the ./usb/extlinux/ directory:
```
# cp -p /usr/share/syslinux/menu.c32 ./usb/extlinux/
```
Move the usb/extlinux/isolinux.cfg file to usb/extlinux/extlinux.conf:
```
# mv usb/extlinux/isolinux.cfg usb/extlinux/extlinux.conf
```

Remove the temporary files:

# rm -f usb/extlinux/isolinux.bin usb/extlinux/TRANS.TBL

Convert the custom-boot.img file and copy it:

# dd if=/dev/zero of=./custom-boot.img bs=1024 count=300000

Discover the correct mounting location for the loopback device:
```
# losetup -f
/dev/loop0
```
Set up the loopback device with the boot image:
```
# losetup /dev/loop0 ./custom-boot.img
```
Open the fdisk utility:
```
# fdisk /dev/loop0
```
Create one primary bootable partition on the device. This can be done by using the following key press combination: n p 1 Enter Enter a 1 p w
Copy the master boot record (MBR) to the loopback device:
```
# dd if=/usr/share/syslinux/mbr.bin of=/dev/loop0
```
Add partition maps to the loopback device:
```
# kpartx -av /dev/loop0
```

Create the file system:

# mkfs.ext2 -m 0 -L "Custom Red Hat Enterprise Linux Boot" /dev/mapper/loop0p1

Mount the device:
```
# mount /dev/mapper/loop0p1 temp
```
Delete temporary files:
```
# rm -rf temp/lost+found
```
Copy the usb/extlinux/ directory to a temporary location:
```
# cp -a usb/extlinux/* temp/
```
Install the bootloader in the temporary location:
```
# extlinux -i temp
```
Unmount the temporary location:
```
# umount temp
```
Delete the partition maps on the loopback device:
```
# kpartx -dv /dev/loop0
```
Delete the loopback device:
```
# losetup -d /dev/loop0
```
Synchronize the file system changes:
```
# sync
```
Open the extlinux.conf file in your preferred text editor, and customize any boot parameters and targets as needed for USB booting.
Transfer the image to a USB device to complete the procedure. Insert the device, and run the dmesg command to check the mounting location. In this example, it is /dev/sdb.
Unmount the USB device:
```
# umount /dev/sdb
```
Copy the image to the USB device:
```
# dd if=./custom-boot.img of=/dev/sdb
```

Questo contenuto non è disponibile nella lingua selezionata.

Appendix A. Boot Devices

Formazione

Prova, acquista e vendi

Community

Informazioni sulla documentazione di Red Hat

Rendiamo l’open source più inclusivo

Informazioni su Red Hat

Red Hat legal and privacy links

Red Hat legal and privacy links