Red Hat Summit Red Hat SummitSupportoConsoleSviluppatoriInizia una provaContatti

Questo contenuto non è disponibile nella lingua selezionata.

Chapter 9. Installing the hosted control planes command-line interface

The hosted control planes command-line interface, hcp, is a tool that you can use to get started with hosted control planes. For Day 2 operations, such as management and configuration, use GitOps or your own automation tool.

You can install the hosted control planes command-line interface (CLI), hcp, from the terminal.

Prerequisites

  • On an OpenShift Container Platform cluster, you have installed multicluster engine for Kubernetes Operator 2.5 or later. The multicluster engine Operator is automatically installed when you install Red Hat Advanced Cluster Management. You can also install multicluster engine Operator without Red Hat Advanced Management as an Operator from the OpenShift Container Platform software catalog.

Procedure

  1. Get the URL to download the hcp binary by running the following command: 

    $ oc get ConsoleCLIDownload hcp-cli-download -o json | jq -r ".spec"

  2. Download the hcp binary by running the following command: 

    $ wget <hcp_cli_download_url>
    1
    1
    Replace hcp_cli_download_url with the URL that you obtained from the previous step.

  3. Unpack the downloaded archive by running the following command: 

    $ tar xvzf hcp.tar.gz

  4. Make the hcp binary file executable by running the following command: 

    $ chmod +x hcp

  5. Move the hcp binary file to a directory in your path by running the following command: 

    $ sudo mv hcp /usr/local/bin/.
Note

If you download the CLI on a Mac computer, you might see a warning about the hcp binary file. You need to adjust your security settings to allow the binary file to be run.

Verification

  • Verify that you see the list of available parameters by running the following command: 

    $ hcp create cluster <platform> --help
    1
    1
    You can use the hcp create cluster command to create and manage hosted clusters. The supported platforms are aws, agent, and kubevirt.

You can install the hosted control planes command-line interface (CLI), hcp, by using the OpenShift Container Platform web console.

Prerequisites

  • On an OpenShift Container Platform cluster, you have installed multicluster engine for Kubernetes Operator 2.5 or later. The multicluster engine Operator is automatically installed when you install Red Hat Advanced Cluster Management. You can also install multicluster engine Operator without Red Hat Advanced Management as an Operator from the OpenShift Container Platform software catalog.

Procedure

  1. From the OpenShift Container Platform web console, click the Help icon Command Line Tools.
  2. Click Download hcp CLI for your platform.

  3. Unpack the downloaded archive by running the following command: 

    $ tar xvzf hcp.tar.gz

  4. Run the following command to make the binary file executable: 

    $ chmod +x hcp

  5. Run the following command to move the binary file to a directory in your path: 

    $ sudo mv hcp /usr/local/bin/.
Note

If you download the CLI on a Mac computer, you might see a warning about the hcp binary file. You need to adjust your security settings to allow the binary file to be run.

Verification

  • Verify that you see the list of available parameters by running the following command: 

    $ hcp create cluster <platform> --help
    1
    1
    You can use the hcp create cluster command to create and manage hosted clusters. The supported platforms are aws, agent, and kubevirt.

You can install the hosted control planes command-line interface (CLI), hcp, by using the content gateway.

Prerequisites

  • On an OpenShift Container Platform cluster, you have installed multicluster engine for Kubernetes Operator 2.7 or later. The multicluster engine Operator is automatically installed when you install Red Hat Advanced Cluster Management. You can also install multicluster engine Operator without Red Hat Advanced Management as an Operator from OpenShift Container Platform OperatorHub.

Procedure

  1. Navigate to the content gateway and download the hcp binary.

  2. Unpack the downloaded archive by running the following command: 

    $ tar xvzf hcp.tar.gz

  3. Make the hcp binary file executable by running the following command: 

    $ chmod +x hcp

  4. Move the hcp binary file to a directory in your path by running the following command: 

    $ sudo mv hcp /usr/local/bin/.
Note

If you download the CLI on a Mac computer, you might see a warning about the hcp binary file. You need to adjust your security settings to allow the binary file to be run.

Verification

  • Verify that you see the list of available parameters by running the following command: 

    $ hcp create cluster <platform> --help
    1
    1
    You can use the hcp create cluster command to create and manage hosted clusters. The supported platforms are aws, agent, and kubevirt.
Red Hat logoGithubredditYoutubeTwitter

Formazione

Prova, acquista e vendi

Community

Informazioni sulla documentazione di Red Hat

Aiutiamo gli utenti Red Hat a innovarsi e raggiungere i propri obiettivi con i nostri prodotti e servizi grazie a contenuti di cui possono fidarsi. Esplora i nostri ultimi aggiornamenti.

Rendiamo l’open source più inclusivo

Red Hat si impegna a sostituire il linguaggio problematico nel codice, nella documentazione e nelle proprietà web. Per maggiori dettagli, visita il Blog di Red Hat.

Informazioni su Red Hat

Forniamo soluzioni consolidate che rendono più semplice per le aziende lavorare su piattaforme e ambienti diversi, dal datacenter centrale all'edge della rete.

Theme

© 2026 Red HatTorna in cima