SupportoConsoleSviluppatoriInizia una provaContatti

Questo contenuto non è disponibile nella lingua selezionata.

Chapter 8. Troubleshooting Ceph objects

As a storage administrator, you can use the ceph-objectstore-tool utility to perform high-level or low-level object operations. The ceph-objectstore-tool utility can help you troubleshoot problems related to objects within a particular OSD or placement group.

Important

Manipulating objects can cause unrecoverable data loss. Contact Red Hat support before using the ceph-objectstore-tool utility.

Prerequisites

  • Verify there are no network-related issues.

8.1. Troubleshooting high-level object operations

As a storage administrator, you can use the ceph-objectstore-tool utility to perform high-level object operations. The ceph-objectstore-tool utility supports the following high-level object operations:

  • List objects
  • List lost objects
  • Fix lost objects
Important

Manipulating objects can cause unrecoverable data loss. Contact Red Hat support before using the ceph-objectstore-tool utility.

Prerequisites

  • Root-level access to the Ceph OSD nodes.

8.1.1. Listing objects

The OSD can contain zero to many placement groups, and zero to many objects within a placement group (PG). The ceph-objectstore-tool utility allows you to list objects stored within an OSD.

Prerequisites

  • Root-level access to the Ceph OSD node.
  • Stopping the ceph-osd daemon.

Procedure

  1. Verify the appropriate OSD is down:

    Syntax

    systemctl status ceph-FSID@osd.OSD_ID

    Example

    [root@host01 ~]# systemctl status ceph-b404c440-9e4c-11ec-a28a-001a4a0001df@osd.0.service

  2. Log in to the OSD container:

    Syntax

    cephadm shell --name osd.OSD_ID

    Example

    [root@host01 ~]# cephadm shell --name osd.0

  3. Identify all the objects within an OSD, regardless of their placement group:

    Syntax

    ceph-objectstore-tool --data-path PATH_TO_OSD --op list

    Example

    [ceph: root@host01 /]# ceph-objectstore-tool --data-path /var/lib/ceph/osd/ceph-0 --op list

  4. Identify all the objects within a placement group:

    Syntax

    ceph-objectstore-tool --data-path PATH_TO_OSD --pgid PG_ID --op list

    Example

    [ceph: root@host01 /]# ceph-objectstore-tool --data-path /var/lib/ceph/osd/ceph-0 --pgid 0.1c --op list

  5. Identify the PG an object belongs to:

    Syntax

    ceph-objectstore-tool --data-path PATH_TO_OSD --op list OBJECT_ID

    Example

    [ceph: root@host01 /]# ceph-objectstore-tool --data-path /var/lib/ceph/osd/ceph-0 --op list default.region

8.1.2. Fixing lost objects

You can use the ceph-objectstore-tool utility to list and fix lost and unfound objects stored within a Ceph OSD. This procedure applies only to legacy objects.

Prerequisites

  • Root-level access to the Ceph OSD node.
  • Stopping the ceph-osd daemon.

Procedure

  1. Verify the appropriate OSD is down:

    Syntax

    systemctl status ceph-FSID@osd.OSD_ID

    Example

    [root@host01 ~]# systemctl status ceph-b404c440-9e4c-11ec-a28a-001a4a0001df@osd.0.service

  2. Log in to the OSD container:

    Syntax

    cephadm shell --name osd.OSD_ID

    Example

    [root@host01 ~]# cephadm shell --name osd.0

  3. To list all the lost legacy objects:

    Syntax

    ceph-objectstore-tool --data-path PATH_TO_OSD --op fix-lost --dry-run

    Example

    [ceph: root@host01 /]# ceph-objectstore-tool --data-path /var/lib/ceph/osd/ceph-0 --op fix-lost --dry-run

  4. Use the ceph-objectstore-tool utility to fix lost and unfound objects. Select the appropriate circumstance:

    1. To fix all lost objects:

      Syntax

      ceph-objectstore-tool --data-path PATH_TO_OSD --op fix-lost

      Example

      [ceph: root@host01 /]# ceph-objectstore-tool --data-path /var/lib/ceph/osd/ceph-0 --op fix-lost

    2. To fix all the lost objects within a placement group:

      Syntax

      ceph-objectstore-tool --data-path PATH_TO_OSD --pgid PG_ID --op fix-lost

      Example

      [ceph: root@host01 /]# ceph-objectstore-tool --data-path /var/lib/ceph/osd/ceph-0 --pgid 0.1c --op fix-lost

    3. To fix a lost object by its identifier:

      Syntax

      ceph-objectstore-tool --data-path PATH_TO_OSD --op fix-lost OBJECT_ID

      Example

      [ceph: root@host01 /]# ceph-objectstore-tool --data-path /var/lib/ceph/osd/ceph-0 --op fix-lost default.region

8.2. Troubleshooting low-level object operations

As a storage administrator, you can use the ceph-objectstore-tool utility to perform low-level object operations. The ceph-objectstore-tool utility supports the following low-level object operations:

  • Manipulate the object’s content
  • Remove an object
  • List the object map (OMAP)
  • Manipulate the OMAP header
  • Manipulate the OMAP key
  • List the object’s attributes
  • Manipulate the object’s attribute key
Important

Manipulating objects can cause unrecoverable data loss. Contact Red Hat support before using the ceph-objectstore-tool utility.

Prerequisites

  • Root-level access to the Ceph OSD nodes.

8.2.1. Manipulating the object’s content

With the ceph-objectstore-tool utility, you can get or set bytes on an object.

Important

Setting the bytes on an object can cause unrecoverable data loss. To prevent data loss, make a backup copy of the object.

Prerequisites

  • Root-level access to the Ceph OSD node.
  • Stopping the ceph-osd daemon.

Procedure

  1. Verify the appropriate OSD is down:

    Syntax

    systemctl status ceph-FSID@osd.OSD_ID

    Example

    [root@host01 ~]# systemctl status ceph-b404c440-9e4c-11ec-a28a-001a4a0001df@osd.0.service

  2. Find the object by listing the objects of the OSD or placement group (PG).

  3. Log in to the OSD container:

    Syntax

    cephadm shell --name osd.OSD_ID

    Example

    [root@host01 ~]# cephadm shell --name osd.0

  4. Before setting the bytes on an object, make a backup and a working copy of the object:

    Syntax

    ceph-objectstore-tool --data-path PATH_TO_OSD --pgid PG_ID \
OBJECT \
get-bytes > OBJECT_FILE_NAME

    Example

    [ceph: root@host01 /]# ceph-objectstore-tool --data-path /var/lib/ceph/osd/ceph-0 --pgid 0.1c \
'{"oid":"zone_info.default","key":"","snapid":-2,"hash":235010478,"max":0,"pool":11,"namespace":""}'  \
get-bytes > zone_info.default.backup

[ceph: root@host01 /]#  ceph-objectstore-tool --data-path /var/lib/ceph/osd/ceph-0 --pgid 0.1c \
'{"oid":"zone_info.default","key":"","snapid":-2,"hash":235010478,"max":0,"pool":11,"namespace":""}'  \
get-bytes > zone_info.default.working-copy

  5. Edit the working copy object file and modify the object contents accordingly.

  6. Set the bytes of the object:

    Syntax

    ceph-objectstore-tool --data-path PATH_TO_OSD --pgid PG_ID \
OBJECT \
set-bytes < OBJECT_FILE_NAME

    Example

    [ceph: root@host01 /]# ceph-objectstore-tool --data-path /var/lib/ceph/osd/ceph-0 --pgid 0.1c \
'{"oid":"zone_info.default","key":"","snapid":-2,"hash":235010478,"max":0,"pool":11,"namespace":""}' \
set-bytes < zone_info.default.working-copy

8.2.2. Removing an object

Use the ceph-objectstore-tool utility to remove an object. By removing an object, its contents and references are removed from the placement group (PG).

Important

You cannot recreate an object once it is removed.

Prerequisites

  • Root-level access to the Ceph OSD node.
  • Stopping the ceph-osd daemon.

Procedure

  1. Log in to the OSD container:

    Syntax

    cephadm shell --name osd.OSD_ID

    Example

    [root@host01 ~]# cephadm shell --name osd.0

  2. Remove an object:

    Syntax

    ceph-objectstore-tool --data-path PATH_TO_OSD --pgid PG_ID \
OBJECT \
remove

    Example

    [ceph: root@host01 /]# ceph-objectstore-tool --data-path /var/lib/ceph/osd/ceph-0 --pgid 0.1c \
'{"oid":"zone_info.default","key":"","snapid":-2,"hash":235010478,"max":0,"pool":11,"namespace":""}' \
remove

8.2.3. Listing the object map

Use the ceph-objectstore-tool utility to list the contents of the object map (OMAP). The output provides you a list of keys.

Prerequisites

  • Root-level access to the Ceph OSD node.
  • Stopping the ceph-osd daemon.

Procedure

  1. Verify the appropriate OSD is down:

    Syntax

    systemctl status ceph-osd@OSD_ID

    Example

    [root@host01 ~]# systemctl status ceph-b404c440-9e4c-11ec-a28a-001a4a0001df@osd.0.service

  2. Log in to the OSD container:

    Syntax

    cephadm shell --name osd.OSD_ID

    Example

    [root@host01 ~]# cephadm shell --name osd.0

  3. List the object map:

    Syntax

    ceph-objectstore-tool --data-path PATH_TO_OSD --pgid PG_ID \
OBJECT \
list-omap

    Example

    [ceph: root@host01 /]# ceph-objectstore-tool --data-path /var/lib/ceph/osd/ceph-0 --pgid 0.1c \
'{"oid":"zone_info.default","key":"","snapid":-2,"hash":235010478,"max":0,"pool":11,"namespace":""}' \
list-omap

8.2.4. Manipulating the object map header

The ceph-objectstore-tool utility outputs the object map (OMAP) header with the values associated with the object’s keys.

Prerequisites

  • Root-level access to the Ceph OSD node.
  • Stopping the ceph-osd daemon.

Procedure

  1. Verify the appropriate OSD is down:

    Syntax

    systemctl status ceph-FSID@osd.OSD_ID

    Example

    [root@host01 ~]# systemctl status ceph-b404c440-9e4c-11ec-a28a-001a4a0001df@osd.0.service

  2. Log in to the OSD container:

    Syntax

    cephadm shell --name osd.OSD_ID

    Example

    [root@host01 ~]# cephadm shell --name osd.0

  3. Get the object map header:

    Syntax

    ceph-objectstore-tool --data-path PATH_TO_OSD \
--pgid PG_ID OBJECT \
get-omaphdr > OBJECT_MAP_FILE_NAME

    Example

    [ceph: root@host01 /]# ceph-objectstore-tool --data-path /var/lib/ceph/osd/ceph-0 \
--pgid 0.1c '{"oid":"zone_info.default","key":"","snapid":-2,"hash":235010478,"max":0,"pool":11,"namespace":""}'  \
get-omaphdr > zone_info.default.omaphdr.txt

  4. Set the object map header:

    Syntax

    ceph-objectstore-tool --data-path PATH_TO_OSD \
--pgid PG_ID OBJECT \
get-omaphdr < OBJECT_MAP_FILE_NAME

    Example

    [ceph: root@host01 /]# ceph-objectstore-tool --data-path /var/lib/ceph/osd/ceph-0 \
--pgid 0.1c '{"oid":"zone_info.default","key":"","snapid":-2,"hash":235010478,"max":0,"pool":11,"namespace":""}'  \
set-omaphdr < zone_info.default.omaphdr.txt

8.2.5. Manipulating the object map key

Use the ceph-objectstore-tool utility to change the object map (OMAP) key. You need to provide the data path, the placement group identifier (PG ID), the object, and the key in the OMAP.

Prerequisites

  • Root-level access to the Ceph OSD node.
  • Stopping the ceph-osd daemon.

Procedure

  1. Log in to the OSD container:

    Syntax

    cephadm shell --name osd.OSD_ID

    Example

    [root@host01 ~]# cephadm shell --name osd.0

  2. Get the object map key:

    Syntax

    ceph-objectstore-tool --data-path PATH_TO_OSD \
--pgid PG_ID OBJECT \
get-omap KEY > OBJECT_MAP_FILE_NAME

    Example

    [ceph: root@host01 /]# ceph-objectstore-tool --data-path /var/lib/ceph/osd/ceph-0 \
--pgid 0.1c '{"oid":"zone_info.default","key":"","snapid":-2,"hash":235010478,"max":0,"pool":11,"namespace":""}'  \
get-omap "" > zone_info.default.omap.txt

  3. Set the object map key:

    Syntax

    ceph-objectstore-tool --data-path PATH_TO_OSD \
--pgid PG_ID OBJECT \
set-omap KEY < OBJECT_MAP_FILE_NAME

    Example

    [ceph: root@host01 /]# ceph-objectstore-tool --data-path /var/lib/ceph/osd/ceph-0 \
--pgid 0.1c '{"oid":"zone_info.default","key":"","snapid":-2,"hash":235010478,"max":0,"pool":11,"namespace":""}'  \
set-omap "" < zone_info.default.omap.txt

  4. Remove the object map key:

    Syntax

    ceph-objectstore-tool --data-path PATH_TO_OSD \
--pgid PG_ID OBJECT \
rm-omap KEY

    Example

    [ceph: root@host01 /]# ceph-objectstore-tool --data-path /var/lib/ceph/osd/ceph-0 \
--pgid 0.1c '{"oid":"zone_info.default","key":"","snapid":-2,"hash":235010478,"max":0,"pool":11,"namespace":""}'  \
rm-omap ""

8.2.6. Listing the object’s attributes

Use the ceph-objectstore-tool utility to list an object’s attributes. The output provides you with the object’s keys and values.

Prerequisites

  • Root-level access to the Ceph OSD node.
  • Stopping the ceph-osd daemon.

Procedure

  1. Verify the appropriate OSD is down:

    Syntax

    systemctl status ceph-FSID@osd.OSD_ID

    Example

    [root@host01 ~]# systemctl status ceph-b404c440-9e4c-11ec-a28a-001a4a0001df@osd.0.service

  2. Log in to the OSD container:

    Syntax

    cephadm shell --name osd.OSD_ID

    Example

    [root@host01 ~]# cephadm shell --name osd.0

  3. List the object’s attributes:

    Syntax

    ceph-objectstore-tool --data-path PATH_TO_OSD \
--pgid PG_ID OBJECT \
list-attrs

    Example

    [ceph: root@host01 /]# ceph-objectstore-tool --data-path /var/lib/ceph/osd/ceph-0 \
--pgid 0.1c '{"oid":"zone_info.default","key":"","snapid":-2,"hash":235010478,"max":0,"pool":11,"namespace":""}' \
list-attrs

8.2.7. Manipulating the object attribute key

Use the ceph-objectstore-tool utility to change an object’s attributes. To manipulate the object’s attributes you need the data paths, the placement group identifier (PG ID), the object, and the key in the object’s attribute.

Prerequisites

  • Root-level access to the Ceph OSD node.
  • Stop the ceph-osd daemon.

Procedure

  1. Verify the appropriate OSD is down:

    Syntax

    systemctl status ceph-FSID@osd.OSD_ID

    Example

    [root@host01 ~]# systemctl status ceph-b404c440-9e4c-11ec-a28a-001a4a0001df@osd.0.service

  2. Log in to the OSD container:

    Syntax

    cephadm shell --name osd.OSD_ID

    Example

    [root@host01 ~]# cephadm shell --name osd.0

  3. Get the object’s attributes:

    Syntax

    ceph-objectstore-tool --data-path PATH_TO_OSD \
--pgid PG_ID OBJECT \
get-attr KEY > OBJECT_ATTRS_FILE_NAME

    Example

    [ceph: root@host01 /]# ceph-objectstore-tool --data-path /var/lib/ceph/osd/ceph-0 \
--pgid 0.1c '{"oid":"zone_info.default","key":"","snapid":-2,"hash":235010478,"max":0,"pool":11,"namespace":""}' \
get-attr "oid" > zone_info.default.attr.txt

  4. Set an object’s attributes:

    Syntax

    ceph-objectstore-tool --data-path PATH_TO_OSD \
--pgid PG_ID OBJECT \
set-attr KEY < OBJECT_ATTRS_FILE_NAME

    Example

    [ceph: root@host01 /]# ceph-objectstore-tool --data-path /var/lib/ceph/osd/ceph-0 \
--pgid 0.1c '{"oid":"zone_info.default","key":"","snapid":-2,"hash":235010478,"max":0,"pool":11,"namespace":""}' \
set-attr "oid"<zone_info.default.attr.txt

  5. Remove an object’s attributes:

    Syntax

    ceph-objectstore-tool --data-path PATH_TO_OSD \
--pgid PG_ID OBJECT  \
rm-attr KEY

    Example

    [ceph: root@host01 /]# ceph-objectstore-tool --data-path /var/lib/ceph/osd/ceph-0 \
--pgid 0.1c '{"oid":"zone_info.default","key":"","snapid":-2,"hash":235010478,"max":0,"pool":11,"namespace":""}' \
rm-attr "oid"

Additional Resources

Red Hat logoGithubRedditYoutubeTwitter

Formazione

Prova, acquista e vendi

Community

Informazioni sulla documentazione di Red Hat

Aiutiamo gli utenti Red Hat a innovarsi e raggiungere i propri obiettivi con i nostri prodotti e servizi grazie a contenuti di cui possono fidarsi.

Rendiamo l’open source più inclusivo

Red Hat si impegna a sostituire il linguaggio problematico nel codice, nella documentazione e nelle proprietà web. Per maggiori dettagli, visita ilBlog di Red Hat.

Informazioni su Red Hat

Forniamo soluzioni consolidate che rendono più semplice per le aziende lavorare su piattaforme e ambienti diversi, dal datacenter centrale all'edge della rete.

© 2024 Red Hat, Inc.