Questo contenuto non è disponibile nella lingua selezionata.
Appendix E. Audit Events
This Appendix provides individual audit events and their parameter description and format. Every audit event in the log is accompanied by the following information:
- The Java identifier of the thread. For example:
0.localhost-startStop-1
- The time stamp the event occurred at. For example:
[21/Jan/2019:17:53:00 IST]
- The log source (14 is SIGNED_AUDIT):
[14]
- The current log level (6 is Security-related events. See the Log Levels (Message Categories) section in the Red Hat Certificate System Planning, Installation, and Deployment Guide. For example:
[6]
- The information about the log event (which is log event specific; see Section E.1, “Audit Event Descriptions” for information about each field in a particular log event). For example:
[AuditEvent=AUDIT_LOG_STARTUP][SubjectID=$System$][Outcome=Success] audit function startup
E.1. Audit Event Descriptions
The following lists the audit events provided in Certificate System:
####################### SIGNED AUDIT EVENTS #############################
# Common fields:
# - Outcome: "Success" or "Failure"
# - SubjectID: The UID of the user responsible for the operation
# "$System$" or "SYSTEM" if system-initiated operation (e.g. log signing).
#
#########################################################################
# Required Audit Events
#
# Event: ACCESS_SESSION_ESTABLISH with [Outcome=Failure]
# Description: This event is used when access session failed to establish.
# Applicable subsystems: CA, KRA, OCSP, TKS, TPS
# Enabled by default: Yes
# Fields:
# - ClientIP: Client IP address.
# - ServerIP: Server IP address.
# - SubjectID: Client certificate subject DN.
# - Outcome: Failure
# - Info: Failure reason.
#
LOGGING_SIGNED_AUDIT_ACCESS_SESSION_ESTABLISH_FAILURE=\
<type=ACCESS_SESSION_ESTABLISH>:[AuditEvent=ACCESS_SESSION_ESTABLISH]{0} access session establish failure
#
# Event: ACCESS_SESSION_ESTABLISH with [Outcome=Success]
# Description: This event is used when access session was established successfully.
# Applicable subsystems: CA, KRA, OCSP, TKS, TPS
# Enabled by default: Yes
# Fields:
# - ClientIP: Client IP address.
# - ServerIP: Server IP address.
# - SubjectID: Client certificate subject DN.
# - Outcome: Success
#
LOGGING_SIGNED_AUDIT_ACCESS_SESSION_ESTABLISH_SUCCESS=\
<type=ACCESS_SESSION_ESTABLISH>:[AuditEvent=ACCESS_SESSION_ESTABLISH]{0} access session establish success
#
# Event: ACCESS_SESSION_TERMINATED
# Description: This event is used when access session was terminated.
# Applicable subsystems: CA, KRA, OCSP, TKS, TPS
# Enabled by default: Yes
# Fields:
# - ClientIP: Client IP address.
# - ServerIP: Server IP address.
# - SubjectID: Client certificate subject DN.
# - Info: The TLS Alert received from NSS
# - Outcome: Success
# - Info: The TLS Alert received from NSS
#
LOGGING_SIGNED_AUDIT_ACCESS_SESSION_TERMINATED=\
<type=ACCESS_SESSION_TERMINATED>:[AuditEvent=ACCESS_SESSION_TERMINATED]{0} access session terminated
#
# Event: AUDIT_LOG_SIGNING
# Description: This event is used when a signature on the audit log is generated (same as "flush" time).
# Applicable subsystems: CA, KRA, OCSP, TKS, TPS
# Enabled by default: Yes
# Fields:
# - SubjectID: Predefined to be "$System$" because this operation
# associates with no user.
# - Outcome: Success
# - sig: The base-64 encoded signature of the buffer just flushed.
#
LOGGING_SIGNED_AUDIT_AUDIT_LOG_SIGNING_3=[AuditEvent=AUDIT_LOG_SIGNING][SubjectID={0}][Outcome={1}] signature of audit buffer just flushed: sig: {2}
#
# Event: AUDIT_LOG_STARTUP
# Description: This event is used at audit function startup.
# Applicable subsystems: CA, KRA, OCSP, TKS, TPS
# Enabled by default: Yes
# Fields:
# - SubjectID: $System$
# - Outcome:
#
LOGGING_SIGNED_AUDIT_AUDIT_LOG_STARTUP_2=<type=AUDIT_LOG_STARTUP>:[AuditEvent=AUDIT_LOG_STARTUP][SubjectID={0}][Outcome={1}] audit function startup
#
# Event: AUTH with [Outcome=Failure]
# Description: This event is used when authentication fails.
# In case of TLS-client auth, only webserver env can pick up the TLS violation.
# CS authMgr can pick up certificate mismatch, so this event is used.
# Applicable subsystems: CA, KRA, OCSP, TKS, TPS
# Enabled by default: Yes
# Fields:
# - SubjectID:
# - Outcome: Failure
# (obviously, if authentication failed, you won't have a valid SubjectID, so
# in this case, SubjectID should be $Unidentified$)
# - AuthMgr: The authentication manager instance name that did
# this authentication.
# - AttemptedCred: The credential attempted and failed.
#
LOGGING_SIGNED_AUDIT_AUTH_FAIL=<type=AUTH>:[AuditEvent=AUTH]{0} authentication failure
#
# Event: AUTH with [Outcome=Success]
# Description: This event is used when authentication succeeded.
# Applicable subsystems: CA, KRA, OCSP, TKS, TPS
# Enabled by default: Yes
# Fields:
# - SubjectID: id of user who has been authenticated
# - Outcome: Success
# - AuthMgr: The authentication manager instance name that did
# this authentication.
#
LOGGING_SIGNED_AUDIT_AUTH_SUCCESS=<type=AUTH>:[AuditEvent=AUTH]{0} authentication success
#
# Event: AUTHZ with [Outcome=Failure]
# Description: This event is used when authorization has failed.
# Applicable subsystems: CA, KRA, OCSP, TKS, TPS
# Enabled by default: Yes
# Fields:
# - SubjectID: id of user who has failed to be authorized for an action
# - Outcome: Failure
# - aclResource: The ACL resource ID as defined in ACL resource list.
# - Op: One of the operations as defined with the ACL statement
# e.g. "read" for an ACL statement containing "(read,write)".
# - Info:
#
LOGGING_SIGNED_AUDIT_AUTHZ_FAIL=<type=AUTHZ>:[AuditEvent=AUTHZ]{0} authorization failure
#
# Event: AUTHZ with [Outcome=Success]
# Description: This event is used when authorization is successful.
# Applicable subsystems: CA, KRA, OCSP, TKS, TPS
# Enabled by default: Yes
# Fields:
# - SubjectID: id of user who has been authorized for an action
# - Outcome: Success
# - aclResource: The ACL resource ID as defined in ACL resource list.
# - Op: One of the operations as defined with the ACL statement
# e.g. "read" for an ACL statement containing "(read,write)".
#
LOGGING_SIGNED_AUDIT_AUTHZ_SUCCESS=<type=AUTHZ>:[AuditEvent=AUTHZ]{0} authorization success
#
# Event: CERT_PROFILE_APPROVAL
# Description: This event is used when an agent approves/disapproves a certificate profile set by the
# administrator for automatic approval.
# Applicable subsystems: CA
# Enabled by default: Yes
# Fields:
# - SubjectID: id of the CA agent who approved the certificate enrollment profile
# - Outcome:
# - ProfileID: One of the profiles defined by the administrator
# and to be approved by an agent.
# - Op: "approve" or "disapprove".
#
LOGGING_SIGNED_AUDIT_CERT_PROFILE_APPROVAL_4=<type=CERT_PROFILE_APPROVAL>:[AuditEvent=CERT_PROFILE_APPROVAL][SubjectID={0}][Outcome={1}][ProfileID={2}][Op={3}] certificate profile approval
#
# Event: CERT_REQUEST_PROCESSED
# Description: This event is used when certificate request has just been through the approval process.
# Applicable subsystems: CA
# Enabled by default: Yes
# Fields:
# - SubjectID: The UID of the agent who approves, rejects, or cancels
# the certificate request.
# - Outcome:
# - ReqID: The request ID.
# - InfoName: "certificate" (in case of approval), "rejectReason"
# (in case of reject), or "cancelReason" (in case of cancel)
# - InfoValue: The certificate (in case of success), a reject reason in
# text, or a cancel reason in text.
# - CertSerialNum:
#
LOGGING_SIGNED_AUDIT_CERT_REQUEST_PROCESSED=<type=CERT_REQUEST_PROCESSED>:[AuditEvent=CERT_REQUEST_PROCESSED]{0} certificate request processed
#
# Event: CERT_SIGNING_INFO
# Description: This event indicates which key is used to sign certificates.
# Applicable subsystems: CA
# Enabled by default: Yes
# Fields:
# - SubjectID: $System$
# - Outcome: Success
# - SKI: Subject Key Identifier of the certificate signing certificate
# - AuthorityID: (applicable only to lightweight CA)
#
LOGGING_SIGNED_AUDIT_CERT_SIGNING_INFO=<type=CERT_SIGNING_INFO>:[AuditEvent=CERT_SIGNING_INFO]{0} certificate signing info
#
# Event: CERT_STATUS_CHANGE_REQUEST
# Description: This event is used when a certificate status change request (e.g. revocation)
# is made (before approval process).
# Applicable subsystems: CA
# Enabled by default: Yes
# Fields:
# - SubjectID: id of uer who performed the action
# - Outcome:
# - ReqID: The request ID.
# - CertSerialNum: The serial number (in hex) of the certificate to be revoked.
# - RequestType: "revoke", "on-hold", "off-hold"
#
LOGGING_SIGNED_AUDIT_CERT_STATUS_CHANGE_REQUEST=<type=CERT_STATUS_CHANGE_REQUEST>:[AuditEvent=CERT_STATUS_CHANGE_REQUEST]{0} certificate revocation/unrevocation request made
#
# Event: CERT_STATUS_CHANGE_REQUEST_PROCESSED
# Description: This event is used when certificate status is changed (revoked, expired, on-hold,
# off-hold).
# Applicable subsystems: CA
# Enabled by default: Yes
# Fields:
# - SubjectID: The UID of the agent that processed the request.
# - Outcome:
# - ReqID: The request ID.
# - RequestType: "revoke", "on-hold", "off-hold"
# - Approval: "complete", "rejected", or "canceled"
# (note that "complete" means "approved")
# - CertSerialNum: The serial number (in hex).
# - RevokeReasonNum: One of the following number:
# reason number reason
# --------------------------------------
# 0 Unspecified
# 1 Key compromised
# 2 CA key compromised (should not be used)
# 3 Affiliation changed
# 4 Certificate superceded
# 5 Cessation of operation
# 6 Certificate is on-hold
# - Info:
#
LOGGING_SIGNED_AUDIT_CERT_STATUS_CHANGE_REQUEST_PROCESSED=<type=CERT_STATUS_CHANGE_REQUEST_PROCESSED>:[AuditEvent=CERT_STATUS_CHANGE_REQUEST_PROCESSED]{0} certificate status change request processed
#
# Event: CLIENT_ACCESS_SESSION_ESTABLISH with [Outcome=Failure]
# Description: This event is when access session failed to establish when Certificate System acts as client.
# Applicable subsystems: CA, KRA, OCSP, TKS, TPS
# Enabled by default: Yes
# Fields:
# - ClientHost: Client hostname.
# - ServerHost: Server hostname.
# - ServerPort: Server port.
# - SubjectID: SYSTEM
# - Outcome: Failure
# - Info:
#
LOGGING_SIGNED_AUDIT_CLIENT_ACCESS_SESSION_ESTABLISH_FAILURE=\
<type=CLIENT_ACCESS_SESSION_ESTABLISH>:[AuditEvent=CLIENT_ACCESS_SESSION_ESTABLISH]{0} access session failed to establish when Certificate System acts as client
#
# Event: CLIENT_ACCESS_SESSION_ESTABLISH with [Outcome=Success]
# Description: This event is used when access session was established successfully when
# Certificate System acts as client.
# Applicable subsystems: CA, KRA, OCSP, TKS, TPS
# Enabled by default: Yes
# Fields:
# - ClientHost: Client hostname.
# - ServerHost: Server hostname.
# - ServerPort: Server port.
# - SubjectID: SYSTEM
# - Outcome: Success
#
LOGGING_SIGNED_AUDIT_CLIENT_ACCESS_SESSION_ESTABLISH_SUCCESS=\
<type=CLIENT_ACCESS_SESSION_ESTABLISH>:[AuditEvent=CLIENT_ACCESS_SESSION_ESTABLISH]{0} access session establish successfully when Certificate System acts as client
#
# Event: CLIENT_ACCESS_SESSION_TERMINATED
# Description: This event is used when access session was terminated when Certificate System acts as client.
# Applicable subsystems: CA, KRA, OCSP, TKS, TPS
# Enabled by default: Yes
# Fields:
# - ClientHost: Client hostname.
# - ServerHost: Server hostname.
# - ServerPort: Server port.
# - SubjectID: SYSTEM
# - Outcome: Success
# - Info: The TLS Alert received from NSS
#
LOGGING_SIGNED_AUDIT_CLIENT_ACCESS_SESSION_TERMINATED=\
<type=CLIENT_ACCESS_SESSION_TERMINATED>:[AuditEvent=CLIENT_ACCESS_SESSION_TERMINATED]{0} access session terminated when Certificate System acts as client
#
# Event: CMC_REQUEST_RECEIVED
# Description: This event is used when a CMC request is received.
# Applicable subsystems: CA
# Enabled by default: Yes
# Fields:
# - SubjectID: The UID of user that triggered this event.
# If CMC requests is signed by an agent, SubjectID should
# be that of the agent.
# In case of an unsigned request, it would bear $Unidentified$.
# - Outcome:
# - CMCRequest: Base64 encoding of the CMC request received
#
LOGGING_SIGNED_AUDIT_CMC_REQUEST_RECEIVED_3=<type=CMC_REQUEST_RECEIVED>:[AuditEvent=CMC_REQUEST_RECEIVED][SubjectID={0}][Outcome={1}][CMCRequest={2}] CMC request received
#
# Event: CMC_RESPONSE_SENT
# Description: This event is used when a CMC response is sent.
# Applicable subsystems: CA
# Enabled by default: Yes
# Fields:
# - SubjectID: The UID of user that triggered this event.
# - Outcome:
# - CMCResponse: Base64 encoding of the CMC response sent
#
LOGGING_SIGNED_AUDIT_CMC_RESPONSE_SENT_3=<type=CMC_RESPONSE_SENT>:[AuditEvent=CMC_RESPONSE_SENT][SubjectID={0}][Outcome={1}][CMCResponse={2}] CMC response sent
#
# Event: CMC_SIGNED_REQUEST_SIG_VERIFY
# Description: This event is used when agent signed CMC certificate requests or revocation requests
# are submitted and signature is verified.
# Applicable subsystems: CA
# Enabled by default: Yes
# Fields:
# - SubjectID: the user who signed the CMC request (success case)
# - Outcome:
# - ReqType: The request type (enrollment, or revocation).
# - CertSubject: The certificate subject name of the certificate request.
# - SignerInfo: A unique String representation for the signer.
#
LOGGING_SIGNED_AUDIT_CMC_SIGNED_REQUEST_SIG_VERIFY=<type=CMC_SIGNED_REQUEST_SIG_VERIFY>:[AuditEvent=CMC_SIGNED_REQUEST_SIG_VERIFY]{0} agent signed CMC request signature verification
#
# Event: CMC_USER_SIGNED_REQUEST_SIG_VERIFY
# Description: This event is used when CMC (user-signed or self-signed) certificate requests or revocation requests
# are submitted and signature is verified.
# Applicable subsystems: CA
# Enabled by default: Yes
# Fields:
# - SubjectID: the user who signed the CMC request (success case)
# - Outcome:
# - ReqType: The request type (enrollment, or revocation).
# - CertSubject: The certificate subject name of the certificate request.
# - CMCSignerInfo: A unique String representation for the CMC request signer.
# - info:
#
LOGGING_SIGNED_AUDIT_CMC_USER_SIGNED_REQUEST_SIG_VERIFY_FAILURE=<type=CMC_USER_SIGNED_REQUEST_SIG_VERIFY>:[AuditEvent=CMC_USER_SIGNED_REQUEST_SIG_VERIFY]{0} User signed CMC request signature verification failure
LOGGING_SIGNED_AUDIT_CMC_USER_SIGNED_REQUEST_SIG_VERIFY_SUCCESS=<type=CMC_USER_SIGNED_REQUEST_SIG_VERIFY>:[AuditEvent=CMC_USER_SIGNED_REQUEST_SIG_VERIFY]{0} User signed CMC request signature verification success
#
# Event: CONFIG_ACL
# Description: This event is used when configuring ACL information.
# Applicable subsystems: CA, KRA, OCSP, TKS, TPS
# Enabled by default: Yes
# Fields:
# - SubjectID: id of administrator who performed the action
# - Outcome:
# - ParamNameValPairs: A name-value pair
# (where name and value are separated by the delimiter ;;)
# separated by + (if more than one name-value pair) of config params changed.
#
LOGGING_SIGNED_AUDIT_CONFIG_ACL_3=<type=CONFIG_ACL>:[AuditEvent=CONFIG_ACL][SubjectID={0}][Outcome={1}][ParamNameValPairs={2}] ACL configuration parameter(s) change
#
# Event: CONFIG_AUTH
# Description: This event is used when configuring authentication.
# Applicable subsystems: CA, KRA, OCSP, TKS, TPS
# Enabled by default: Yes
# Fields:
# - SubjectID: id of administrator who performed the action
# - Outcome:
# - ParamNameValPairs: A name-value pair
# (where name and value are separated by the delimiter ;;)
# separated by + (if more than one name-value pair) of config params changed.
# --- Password MUST NOT be logged ---
#
LOGGING_SIGNED_AUDIT_CONFIG_AUTH_3=<type=CONFIG_AUTH>:[AuditEvent=CONFIG_AUTH][SubjectID={0}][Outcome={1}][ParamNameValPairs={2}] authentication configuration parameter(s) change
#
# Event: CONFIG_CERT_PROFILE
# Description: This event is used when configuring certificate profile
# (general settings and certificate profile).
# Applicable subsystems: CA
# Enabled by default: Yes
# Fields:
# - SubjectID: id of administrator who performed the action
# - Outcome:
# - ParamNameValPairs: A name-value pair
# (where name and value are separated by the delimiter ;;)
# separated by + (if more than one name-value pair) of config params changed.
#
LOGGING_SIGNED_AUDIT_CONFIG_CERT_PROFILE_3=<type=CONFIG_CERT_PROFILE>:[AuditEvent=CONFIG_CERT_PROFILE][SubjectID={0}][Outcome={1}][ParamNameValPairs={2}] certificate profile configuration parameter(s) change
#
# Event: CONFIG_CRL_PROFILE
# Description: This event is used when configuring CRL profile
# (extensions, frequency, CRL format).
# Applicable subsystems: CA
# Enabled by default: Yes
# Fields:
# - SubjectID: id of administrator who performed the action
# - Outcome:
# - ParamNameValPairs: A name-value pair
# (where name and value are separated by the delimiter ;;)
# separated by + (if more than one name-value pair) of config params changed.
#
LOGGING_SIGNED_AUDIT_CONFIG_CRL_PROFILE_3=<type=CONFIG_CRL_PROFILE>:[AuditEvent=CONFIG_CRL_PROFILE][SubjectID={0}][Outcome={1}][ParamNameValPairs={2}] CRL profile configuration parameter(s) change
#
# Event: CONFIG_DRM
# Description: This event is used when configuring KRA.
# This includes key recovery scheme, change of any secret component.
# Applicable subsystems: KRA
# Enabled by default: Yes
# Fields:
# - SubjectID: id of administrator who performed the action
# - Outcome:
# - ParamNameValPairs A name-value pair
# (where name and value are separated by the delimiter ;;)
# separated by + (if more than one name-value pair) of config params changed.
# --- secret component (password) MUST NOT be logged ---
#
LOGGING_SIGNED_AUDIT_CONFIG_DRM_3=<type=CONFIG_DRM>:[AuditEvent=CONFIG_DRM][SubjectID={0}][Outcome={1}][ParamNameValPairs={2}] DRM configuration parameter(s) change
#
# Event: CONFIG_OCSP_PROFILE
# Description: This event is used when configuring OCSP profile
# (everything under Online Certificate Status Manager).
# Applicable subsystems: OCSP
# Enabled by default: Yes
# Fields:
# - SubjectID: id of administrator who performed the action
# - Outcome:
# - ParamNameValPairs: A name-value pair
# (where name and value are separated by the delimiter ;;)
# separated by + (if more than one name-value pair) of config params changed.
#
LOGGING_SIGNED_AUDIT_CONFIG_OCSP_PROFILE_3=<type=CONFIG_OCSP_PROFILE>:[AuditEvent=CONFIG_OCSP_PROFILE][SubjectID={0}][Outcome={1}][ParamNameValPairs={2}] OCSP profile configuration parameter(s) change
#
# Event: CONFIG_ROLE
# Description: This event is used when configuring role information.
# This includes anything under users/groups, add/remove/edit a role, etc.
# Applicable subsystems: CA, KRA, OCSP, TKS, TPS
# Enabled by default: Yes
# Fields:
# - SubjectID: id of administrator who performed the action
# - Outcome:
# - ParamNameValPairs: A name-value pair
# (where name and value are separated by the delimiter ;;)
# separated by + (if more than one name-value pair) of config params changed.
#
LOGGING_SIGNED_AUDIT_CONFIG_ROLE=<type=CONFIG_ROLE>:[AuditEvent=CONFIG_ROLE]{0} role configuration parameter(s) change
#
# Event: CONFIG_SERIAL_NUMBER
# Description: This event is used when configuring serial number ranges
# (when requesting a serial number range when cloning, for example).
# Applicable subsystems: CA, KRA
# Enabled by default: Yes
# Fields:
# - SubjectID: id of administrator who performed the action
# - Outcome:
# - ParamNameValPairs: A name-value pair
# (where name and value are separated by the delimiter ;;)
# separated by + (if more than one name-value pair) of config params changed.
#
LOGGING_SIGNED_AUDIT_CONFIG_SERIAL_NUMBER_1=<type=CONFIG_SERIAL_NUMBER>:[AuditEvent=CONFIG_SERIAL_NUMBER][SubjectID={0}][Outcome={1}][ParamNameValPairs={2}] serial number range update
#
# Event: CONFIG_SIGNED_AUDIT
# Description: This event is used when configuring signedAudit.
# Applicable subsystems: CA, KRA, OCSP, TKS, TPS
# Enabled by default: Yes
# Fields:
# - SubjectID: id of administrator who performed the action
# - Outcome:
# - ParamNameValPairs: A name-value pair
# (where name and value are separated by the delimiter ;;)
# separated by + (if more than one name-value pair) of config params changed.
#
LOGGING_SIGNED_AUDIT_CONFIG_SIGNED_AUDIT=<type=CONFIG_SIGNED_AUDIT>:[AuditEvent=CONFIG_SIGNED_AUDIT]{0} signed audit configuration parameter(s) change
#
# Event: CONFIG_TRUSTED_PUBLIC_KEY
# Description: This event is used when:
# 1. "Manage Certificate" is used to edit the trustness of certificates
# and deletion of certificates
# 2. "Certificate Setup Wizard" is used to import CA certificates into the
# certificate database (Although CrossCertificatePairs are stored
# within internaldb, audit them as well)
# Applicable subsystems: CA, KRA, OCSP, TKS, TPS
# Enabled by default: Yes
# Fields:
# - SubjectID: ID of administrator who performed this configuration
# - Outcome:
# - ParamNameValPairs: A name-value pair
# (where name and value are separated by the delimiter ;;)
# separated by + (if more than one name-value pair) of config params changed.
#
LOGGING_SIGNED_AUDIT_CONFIG_TRUSTED_PUBLIC_KEY=<type=CONFIG_TRUSTED_PUBLIC_KEY>:[AuditEvent=CONFIG_TRUSTED_PUBLIC_KEY]{0} certificate database configuration
#
# Event: CRL_SIGNING_INFO
# Description: This event indicates which key is used to sign CRLs.
# Applicable subsystems: CA
# Enabled by default: Yes
# Fields:
# - SubjectID: $System$
# - Outcome:
# - SKI: Subject Key Identifier of the CRL signing certificate
#
LOGGING_SIGNED_AUDIT_CRL_SIGNING_INFO=<type=CRL_SIGNING_INFO>:[AuditEvent=CRL_SIGNING_INFO]{0} CRL signing info
#
# Event: DELTA_CRL_GENERATION
# Description: This event is used when delta CRL generation is complete.
# Applicable subsystems: CA
# Enabled by default: Yes
# Fields:
# - SubjectID: $Unidentified$
# - Outcome: "Success" when delta CRL is generated successfully, "Failure" otherwise.
# - CRLnum: The CRL number that identifies the CRL
# - Info:
# - FailureReason:
#
LOGGING_SIGNED_AUDIT_DELTA_CRL_GENERATION=<type=DELTA_CRL_GENERATION>:[AuditEvent=DELTA_CRL_GENERATION]{0} Delta CRL generation
#
# Event: FULL_CRL_GENERATION
# Description: This event is used when full CRL generation is complete.
# Applicable subsystems: CA
# Enabled by default: Yes
# Fields:
# - SubjectID: $System$
# - Outcome: "Success" when full CRL is generated successfully, "Failure" otherwise.
# - CRLnum: The CRL number that identifies the CRL
# - Info:
# - FailureReason:
#
LOGGING_SIGNED_AUDIT_FULL_CRL_GENERATION=<type=FULL_CRL_GENERATION>:[AuditEvent=FULL_CRL_GENERATION]{0} Full CRL generation
#
# Event: PROFILE_CERT_REQUEST
# Description: This event is used when a profile certificate request is made (before approval process).
# Applicable subsystems: CA
# Enabled by default: Yes
# Fields:
# - SubjectID: The UID of user that triggered this event.
# If CMC enrollment requests signed by an agent, SubjectID should
# be that of the agent.
# - Outcome:
# - CertSubject: The certificate subject name of the certificate request.
# - ReqID: The certificate request ID.
# - ProfileID: One of the certificate profiles defined by the
# administrator.
#
LOGGING_SIGNED_AUDIT_PROFILE_CERT_REQUEST_5=<type=PROFILE_CERT_REQUEST>:[AuditEvent=PROFILE_CERT_REQUEST][SubjectID={0}][Outcome={1}][ReqID={2}][ProfileID={3}][CertSubject={4}] certificate request made with certificate profiles
#
# Event: PROOF_OF_POSSESSION
# Description: This event is used for proof of possession during certificate enrollment processing.
# Applicable subsystems: CA
# Enabled by default: Yes
# Fields:
# - SubjectID: id that represents the authenticated user
# - Outcome:
# - Info: some information on when/how it occurred
#
LOGGING_SIGNED_AUDIT_PROOF_OF_POSSESSION_3=<type=PROOF_OF_POSSESSION>:[AuditEvent=PROOF_OF_POSSESSION][SubjectID={0}][Outcome={1}][Info={2}] proof of possession
#
# Event: OCSP_ADD_CA_REQUEST_PROCESSED
# Description: This event is used when an add CA request to the OCSP Responder is processed.
# Applicable subsystems: OCSP
# Enabled by default: Yes
# Fields:
# - SubjectID: OCSP administrator user id
# - Outcome: "Success" when CA is added successfully, "Failure" otherwise.
# - CASubjectDN: The subject DN of the leaf CA cert in the chain.
#
LOGGING_SIGNED_AUDIT_OCSP_ADD_CA_REQUEST_PROCESSED=<type=OCSP_ADD_CA_REQUEST_PROCESSED>:[AuditEvent=OCSP_ADD_CA_REQUEST_PROCESSED]{0} Add CA for OCSP Responder
#
# Event: OCSP_GENERATION
# Description: This event is used when an OCSP response generated is complete.
# Applicable subsystems: CA, OCSP
# Enabled by default: Yes
# Fields:
# - SubjectID: $NonRoleUser$
# - Outcome: "Success" when OCSP response is generated successfully, "Failure" otherwise.
# - FailureReason:
#
LOGGING_SIGNED_AUDIT_OCSP_GENERATION=<type=OCSP_GENERATION>:[AuditEvent=OCSP_GENERATION]{0} OCSP response generation
#
# Event: OCSP_REMOVE_CA_REQUEST_PROCESSED with [Outcome=Failure]
# Description: This event is used when a remove CA request to the OCSP Responder is processed and failed.
# Applicable subsystems: OCSP
# Enabled by default: Yes
# Fields:
# - SubjectID: OCSP administrator user id
# - Outcome: Failure
# - CASubjectDN: The subject DN of the leaf CA certificate in the chain.
#
LOGGING_SIGNED_AUDIT_OCSP_REMOVE_CA_REQUEST_PROCESSED_FAILURE=<type=OCSP_REMOVE_CA_REQUEST_PROCESSED>:[AuditEvent=OCSP_REMOVE_CA_REQUEST_PROCESSED]{0} Remove CA for OCSP Responder has failed
#
# Event: OCSP_REMOVE_CA_REQUEST_PROCESSED with [Outcome=Success]
# Description: This event is used when a remove CA request to the OCSP Responder is processed successfully.
# Applicable subsystems: OCSP
# Enabled by default: Yes
# Fields:
# - SubjectID: OCSP administrator user id
# - Outcome: "Success" when CA is removed successfully, "Failure" otherwise.
# - CASubjectDN: The subject DN of the leaf CA certificate in the chain.
#
LOGGING_SIGNED_AUDIT_OCSP_REMOVE_CA_REQUEST_PROCESSED_SUCCESS=<type=OCSP_REMOVE_CA_REQUEST_PROCESSED>:[AuditEvent=OCSP_REMOVE_CA_REQUEST_PROCESSED]{0} Remove CA for OCSP Responder is successful
#
# Event: OCSP_SIGNING_INFO
# Description: This event indicates which key is used to sign OCSP responses.
# Applicable subsystems: CA, OCSP
# Enabled by default: Yes
# Fields:
# - SubjectID: $System$
# - Outcome:
# - SKI: Subject Key Identifier of the OCSP signing certificate
# - AuthorityID: (applicable only to lightweight CA)
#
LOGGING_SIGNED_AUDIT_OCSP_SIGNING_INFO=<type=OCSP_SIGNING_INFO>:[AuditEvent=OCSP_SIGNING_INFO]{0} OCSP signing info
#
# Event: ROLE_ASSUME
# Description: This event is used when a user assumes a role.
# Applicable subsystems: CA, KRA, OCSP, TKS, TPS
# Enabled by default: Yes
# Fields:
# - SubjectID:
# - Outcome:
# - Role: One of the valid roles:
# "Administrators", "Certificate Manager Agents", or "Auditors".
# Note that customized role names can be used once configured.
#
LOGGING_SIGNED_AUDIT_ROLE_ASSUME=<type=ROLE_ASSUME>:[AuditEvent=ROLE_ASSUME]{0} assume privileged role
#
# Event: SECURITY_DOMAIN_UPDATE
# Description: This event is used when updating contents of security domain
# (add/remove a subsystem).
# Applicable subsystems: CA
# Enabled by default: Yes
# Fields:
# - SubjectID: CA administrator user ID
# - Outcome:
# - ParamNameValPairs: A name-value pair
# (where name and value are separated by the delimiter ;;)
# separated by + (if more than one name-value pair) of config params changed.
#
LOGGING_SIGNED_AUDIT_SECURITY_DOMAIN_UPDATE_1=<type=SECURITY_DOMAIN_UPDATE>:[AuditEvent=SECURITY_DOMAIN_UPDATE][SubjectID={0}][Outcome={1}][ParamNameValPairs={2}] security domain update
#
# Event: SELFTESTS_EXECUTION
# Description: This event is used when self tests are run.
# Applicable subsystems: CA, KRA, OCSP, TKS, TPS
# Enabled by default: Yes
# Fields:
# - SubjectID: $System$
# - Outcome:
#
LOGGING_SIGNED_AUDIT_SELFTESTS_EXECUTION_2=<type=SELFTESTS_EXECUTION>:[AuditEvent=SELFTESTS_EXECUTION][SubjectID={0}][Outcome={1}] self tests execution (see selftests.log for details)
