Questo contenuto non è disponibile nella lingua selezionata.

Chapter 6. Gaining Privileges

download PDF

System administrators, and in some cases users, need to perform certain tasks with administrative access. Accessing the system as the root user is potentially dangerous and can lead to widespread damage to the system and data. This chapter covers ways to gain administrative privileges using the setuid programs such as su and sudo. These programs allow specific users to perform tasks which would normally be available only to the root user while maintaining a higher level of control and system security.

See the Red Hat Enterprise Linux 7 Security Guide for more information on administrative controls, potential dangers and ways to prevent data loss resulting from improper use of privileged access.

6.1. Configuring Administrative Access Using the su Utility

When a user executes the su command, they are prompted for the root password and, after authentication, are given a root shell prompt.

Once logged in using the su command, the user is the root user and has absolute administrative access to the system. Note that this access is still subject to the restrictions imposed by SELinux, if it is enabled. In addition, once a user has become root, it is possible for them to use the su command to change to any other user on the system without being prompted for a password.

Because this program is so powerful, administrators within an organization may want to limit who has access to the command.

One of the simplest ways to do this is to add users to the special administrative group called wheel. To do this, type the following command as root:

~]# usermod -a -G wheel username

In the previous command, replace username with the user name you want to add to the wheel group.

You can also use the Users settings tool to modify group memberships, as follows. Note that you need administrator privileges to perform this procedure.

  1. Press the Super key to enter the Activities Overview, type Users and then press Enter. The Users settings tool appears. The Super key appears in a variety of guises, depending on the keyboard and other hardware, but often as either the Windows or Command key, and typically to the left of the Spacebar.
  2. To enable making changes, click the Unlock button, and enter a valid administrator password.
  3. Click a user icon in the left column to display the user’s properties in the right pane.
  4. Change the Account Type from Standard to Administrator. This will add the user to the wheel group.

See Section 4.2, “Managing Users in a Graphical Environment” for more information about the Users tool.

After you add the desired users to the wheel group, it is advisable to only allow these specific users to use the su command. To do this, edit the Pluggable Authentication Module (PAM) configuration file for su, /etc/pam.d/su. Open this file in a text editor and uncomment the following line by removing the # character:

#auth      required    pam_wheel.so use_uid

This change means that only members of the administrative group wheel can switch to another user using the su command.

6.2. Configuring Administrative Access Using the sudo Utility

The sudo command offers another approach to giving users administrative access. When trusted users precede an administrative command with sudo, they are prompted for their own password. Then, when they have been authenticated and assuming that the command is permitted, the administrative command is executed as if they were the root user.

The basic format of the sudo command is as follows:

sudo command

In the above example, command would be replaced by a command normally reserved for the root user, such as mount.

The sudo command allows for a high degree of flexibility. For instance, only users listed in the /etc/sudoers configuration file are allowed to use the sudo command and the command is executed in the user’s shell, not a root shell. This means the root shell can be completely disabled as shown in the Red Hat Enterprise Linux 7 Security Guide.

Each successful authentication using the sudo command is logged to the file /var/log/messages and the command issued along with the issuer’s user name is logged to the file /var/log/secure. If additional logging is required, use the pam_tty_audit module to enable TTY auditing for specified users by adding the following line to your /etc/pam.d/system-auth file:

session required pam_tty_audit.so disable=pattern enable=pattern

where pattern represents a comma-separated listing of users with an optional use of globs. For example, the following configuration will enable TTY auditing for the root user and disable it for all other users:

session required pam_tty_audit.so disable=* enable=root

Configuring the pam_tty_audit PAM module for TTY auditing records only TTY input. This means that, when the audited user logs in, pam_tty_audit records the exact keystrokes the user makes into the /var/log/audit/audit.log file. For more information, see the pam_tty_audit(8) manual page.

Another advantage of the sudo command is that an administrator can allow different users access to specific commands based on their needs.

Administrators wanting to edit the sudo configuration file, /etc/sudoers, should use the visudo command.

To give someone full administrative privileges, type visudo and add a line similar to the following in the user privilege specification section:

juan ALL=(ALL) ALL

This example states that the user, juan, can use sudo from any host and execute any command.

The example below illustrates the granularity possible when configuring sudo:

%users localhost=/usr/sbin/shutdown -h now

This example states that any member of the users system group can issue the command /sbin/shutdown -h now as long as it is issued from the console.

The man page for sudoers has a detailed listing of options for this file.

You can also configure sudo users who do not need to provide any password by using the NOPASSWD option in the /etc/sudoers file:


However, even for such users, sudo runs Pluggable Authentication Module (PAM) account management modules, which enables checking for restrictions imposed by PAM modules outside of the authentication phase. This ensures that PAM modules work properly. For example, in case of the pam_time module, the time-based account restriction does not fail.


Always include sudo in the list of allowed services in all PAM-based access control rules. Otherwise, users will receive a "permission denied" error message when they try to access sudo but access is forbidden based on current access control rules.

For more information, see the Red Hat Knowledgebase article After patching to Red Hat Enterprise Linux 7.6, sudo gives a permission denied error..


There are several potential risks to keep in mind when using the sudo command. You can avoid them by editing the /etc/sudoers configuration file using visudo as described above. Leaving the /etc/sudoers file in its default state gives every user in the wheel group unlimited root access.

  • By default, sudo stores the password for a five minute timeout period. Any subsequent uses of the command during this period will not prompt the user for a password. This could be exploited by an attacker if the user leaves his workstation unattended and unlocked while still being logged in. This behavior can be changed by adding the following line to the /etc/sudoers file:

    Defaults  timestamp_timeout=value

    where value is the desired timeout length in minutes. Setting the value to 0 causes sudo to require a password every time.

  • If an account is compromised, an attacker can use sudo to open a new shell with administrative privileges:

    sudo /bin/bash

    Opening a new shell as root in this or similar fashion gives the attacker administrative access for a theoretically unlimited amount of time, bypassing the timeout period specified in the /etc/sudoers file and never requiring the attacker to input a password for sudo again until the newly opened session is closed.

6.3. Additional Resources

While programs allowing users to gain administrative privileges are a potential security risk, security itself is beyond the scope of this particular book. You should therefore refer to the resources listed below for more information regarding security and privileged access.

Installed Documentation

  • su(1) — The manual page for su provides information regarding the options available with this command.
  • sudo(8) — The manual page for sudo includes a detailed description of this command and lists options available for customizing its behavior.
  • pam(8) — The manual page describing the use of Pluggable Authentication Modules (PAM) for Linux.

Online Documentation

  • Red Hat Enterprise Linux 7 Security Guide — The Security Guide for Red Hat Enterprise Linux 7 provides a more detailed look at potential security issues pertaining to the setuid programs as well as techniques used to alleviate these risks.

See Also

Red Hat logoGithubRedditYoutubeTwitter


Prova, acquista e vendi


Informazioni sulla documentazione di Red Hat

Aiutiamo gli utenti Red Hat a innovarsi e raggiungere i propri obiettivi con i nostri prodotti e servizi grazie a contenuti di cui possono fidarsi.

Rendiamo l’open source più inclusivo

Red Hat si impegna a sostituire il linguaggio problematico nel codice, nella documentazione e nelle proprietà web. Per maggiori dettagli, visita ilBlog di Red Hat.

Informazioni su Red Hat

Forniamo soluzioni consolidate che rendono più semplice per le aziende lavorare su piattaforme e ambienti diversi, dal datacenter centrale all'edge della rete.

© 2024 Red Hat, Inc.