Red Hat Summit Red Hat SummitSupportoConsoleSviluppatoriInizia una provaContatti

Questo contenuto non è disponibile nella lingua selezionata.

Chapter 10. RHEL Installations on IBM Power Servers

You can install Red Hat Enterprise Linux on various IBM Power System servers.

10.1. Supported IBM Power Servers
Copia collegamento

You can install Red Hat Enterprise Linux on IBM Power Systems. You can find the complete list of supported IBM Power servers on the Red Hat Ecosystem Catalog.

10.2. Overview of the installation process on PowerVM LPAR by using the HMC
Copia collegamento

You can install RHEL on the PowerVM logical partition (LPAR) by using the Hardware Management Console. A Hardware Management Console (HMC) is a hardware appliance that you can use to administer IBM Power Systems servers.

The installation workflow involves the following general steps:

  1. Download the RHEL installation ISO.
  2. Prepare a bootable physical installation medium based on your installation method.

  3. Verify that the Power System is added to the HMC.

    For more information, see add or remove connections to HMC in the IBM documentation.

  4. Configure VIOS and LPAR on the managed system or configure full system LPAR based on the requirements.
  5. Log in to the HMC console.
  6. Install Red Hat Enterprise Linux.

For detailed instructions, see Installing Linux on PowerVM LPAR by using the HMC in the IBM documentation.

You can install RHEL on IBM Power Systems servers with the graphics card.

The installation workflow involves the following general steps:

  1. Download the RHEL installation ISO.
  2. Prepare a bootable physical installation medium based on your installation method.
  3. Prepare the machine for RHEL installation.
  4. Boot the installer kernel.
  5. Install Red Hat Enterprise Linux.
  6. Optional: Install IBM Tools Repository to use Service and Productivity tools, IBM Advance Toolchain for Linux on Power, and IBM SDK for PowerLinux.

For detailed instructions, see Installing Linux on Power Systems servers with a graphics card in the IBM documentation.

You can install RHEL on IBM Power Systems servers by using the serial console.

The installation workflow involves the following general steps:

  1. Download the RHEL installation ISO.
  2. Prepare a bootable physical installation medium based on your installation method.
  3. Prepare your machine for the RHEL installation.
  4. Boot the installer kernel.

  5. Start a VNC session.

    For more information, see Preparing a remote installation by using VNC.

  6. Install Red Hat Enterprise Linux.
  7. Optional: Install IBM Tools Repository to use additional software. For more information, see IBM Linux on Power tools repository.

For detailed instructions, see Installing Linux on Power Systems servers by using the serial console in the IBM documentation.

Red Hat logoGithubredditYoutubeTwitter

Formazione

Prova, acquista e vendi

Community

Informazioni sulla documentazione di Red Hat

Aiutiamo gli utenti Red Hat a innovarsi e raggiungere i propri obiettivi con i nostri prodotti e servizi grazie a contenuti di cui possono fidarsi. Esplora i nostri ultimi aggiornamenti.

Rendiamo l’open source più inclusivo

Red Hat si impegna a sostituire il linguaggio problematico nel codice, nella documentazione e nelle proprietà web. Per maggiori dettagli, visita il Blog di Red Hat.

Informazioni su Red Hat

Forniamo soluzioni consolidate che rendono più semplice per le aziende lavorare su piattaforme e ambienti diversi, dal datacenter centrale all'edge della rete.

Theme

© 2026 Red HatTorna in cima