Red Hat Summit Red Hat SummitSupportoConsoleSviluppatoriInizia una provaContatti

Questo contenuto non è disponibile nella lingua selezionata.

Chapter 6. Using the JBI Ant Tasks

Important
The Java Business Integration components of Red Hat JBoss Fuse are considered deprecated. You should consider migrating any JBI applications to OSGi.
The JBI specification defines a number of Ant tasks that can be used to manage JBI components. These tasks allow you to install, start, stop, and uninstall components in the Red Hat JBoss Fuse container. You can use the JBI Ant tasks as either command line commands or as part of an Ant build file.

6.1. Using the tasks as commands
Copia collegamento

Usage
Copia collegamento

This is the basic usage statement for the Red Hat JBoss Fuse Ant tasks when used from the command line:

ant -f InstallDir/ant/servicemix-ant-tasks.xml [ -Doption=value ...] task

The task argument is the name of the Ant task you are calling. Each task supports a number of options that are specified using the -Doption=value flag.

Installing a component
Copia collegamento

The Ant task used to install a component to the Red Hat JBoss Fuse container is install-component. Its options are described in Table 6.1.
Expand
Table 6.1. Options for installing a JBI component with an Ant command
OptionRequiredDescription
sm.username noSpecifies the username used to access the management features of the Red Hat JBoss Fuse container
sm.password noSpecifies the password used to access the management features of the Red Hat JBoss Fuse container
sm.host noSpecifies the host name where the container is running; the default value is localhost
sm.port noSpecifies the port where the container's RMI registry is listening; the default value is 1099
sm.install.file yesSpecifies the name of the installer file for the component
Example 6.1 shows an example of using install-component to install the Camel component to a container listening on port 1000.

Example 6.1. Installing a component using an Ant command

>ant -f ant/servicemix-ant-task.xml -Dsm.port=1000 -Dsm.install.file=servicemix-camel-3.3.0.6-fuse-installer.zip install-component
Buildfile: ant\servicemix-ant-task.xml install-component: [echo] install-component [echo] Installing a service engine or binding component. [echo] host=localhost [echo] port=1000 [echo] file=hotdeploy\servicemix-camel-3.3.0.6-fuse-installer.zip BUILD SUCCESSFUL Total time: 7 seconds
Copy to Clipboard Toggle word wrap

Removing a component
Copia collegamento

The Ant task used to remove a component from the Red Hat JBoss Fuse container is uninstall-component. Its options are described in Table 6.2.
Expand
Table 6.2. Options for removing a JBI component with an Ant command
OptionRequiredDescription
sm.username noSpecifies the username used to access the management features of the Red Hat JBoss Fuse container
sm.password noSpecifies the password used to access the management features of the Red Hat JBoss Fuse container
sm.host noSpecifies the host name where the container is running; the default value is localhost
sm.port noSpecifies the port where the container's RMI registry is listening; the default value is 1099
sm.component.name yesSpecifies the name of the JBI component
Example 6.2 shows an example of using uninstall-component to remove the drools component from a container listening on port 1000.

Example 6.2. Removing a component using an Ant command

>ant -f ant\servicemix-ant-task.xml -Dsm.port=1000 -Dsm.component.name=servicemix-drools uninstall-component
Buildfile: ant\servicemix-ant-task.xml uninstall-component: [echo] uninstall-component [echo] Uninstalling a Service Engine or Binding Component. [echo] host=localhost [echo] port=1000 [echo] name=servicemix-drools BUILD SUCCESSFUL Total time: 1 second
Copy to Clipboard Toggle word wrap

Starting a component
Copia collegamento

The Ant task used to start a component is start-component. Its options are described in Table 6.3.
Expand
Table 6.3. Options for starting a JBI component with an Ant command
OptionRequiredDescription
sm.username  Specifies the username used to access the management features of the Red Hat JBoss Fuse container
sm.password noSpecifies the password used to access the management features of the Red Hat JBoss Fuse container.
sm.host noSpecifies the host name where the container is running; the default value is localhost
sm.port noSpecifies the port where the container's RMI registry is listening; the default value is 1099
sm.component.name yesSpecifies the name of the JBI component
Example 6.3 shows an example of using start-component to start the cxf-se component in a container listening on port 1000.

Example 6.3. Starting a component using an Ant command

>ant -f ant\servicemix-ant-task.xml -Dsm.port=1000 -Dsm.component.name=servicemix-cxf-se start-component
Buildfile: ant\servicemix-ant-task.xml start-component: [echo] start-component [echo] starts a particular component (service engine or binding component) in Servicemix [echo] host=localhost [echo] port=1000 [echo] name=servicemix-cxf-se BUILD SUCCESSFUL Total time: 1 second
Copy to Clipboard Toggle word wrap

Stopping a component
Copia collegamento

The Ant task used to stop a component is stop-component. Its options are described in Table 6.4.
Expand
Table 6.4. Options for stopping a JBI component with an Ant command
OptionRequiredDescription
sm.username noSpecifies the username used to access the management features of the Red Hat JBoss Fuse container
sm.password noSpecifies the password used to access the management features of the Red Hat JBoss Fuse container
sm.host noSpecifies the host name where the container is running; the default value is localhost
sm.port noSpecifies the port where the container's RMI registry is listening; the default value is 1099
sm.component.name yesSpecifies the name of the JBI component
Example 6.4 shows an example of using stop-component to stop the cxf-se component in a container listening on port 1000.

Example 6.4. Stopping a component using an Ant command

>ant -f ant\servicemix-ant-task.xml -Dsm.port=1000 -Dsm.component.name=servicemix-cxf-se stop-component
                Buildfile: ant\servicemix-ant-task.xml stop-component: [echo] stop-component [echo] stops a particular component (service engine or binding component) in Servicemix [echo] host=localhost [echo] port=1000 [echo] name=servicemix-cxf-se BUILD SUCCESSFUL Total time: 1 second
Copy to Clipboard Toggle word wrap

Shutting down a component
Copia collegamento

The Ant task used to shutdown a component is shutdown-component. Its options are described in Table 6.5.
Expand
Table 6.5. Options for shutting down a JBI component with an Ant command
OptionRequiredDescription
sm.username noSpecifies the username used to access the management features of the Red Hat JBoss Fuse container
sm.password noSpecifies the password used to access the management features of the Red Hat JBoss Fuse container
sm.host noSpecifies the host name where the container is running; the default value is localhost
sm.port noSpecifies the port where the container's RMI registry is listening; the default value is 1099
sm.component.name yesSpecifies the name of the JBI component

Installing a shared library
Copia collegamento

The Ant task used to install a shared library to the Red Hat JBoss Fuse container is install-shared-library. Its options are described in Table 6.6.
Expand
Table 6.6. Options for installing a shared library with an Ant command
OptionRequiredDescription
sm.username noSpecifies the username used to access the management features of the Red Hat JBoss Fuse container
sm.password noSpecifies the password used to access the management features of the Red Hat JBoss Fuse container
sm.host noSpecifies the host name where the container is running; the default value is localhost
sm.port noSpecifies the port where the container's RMI registry is listening; the default value is 1099
sm.install.file yesSpecifies the name of the library's installer file

Removing a shared library
Copia collegamento

The Ant task used to remove a shared library from the Red Hat JBoss Fuse container is uninstall-shared-library. Its options are described in Table 6.7.
Expand
Table 6.7. Options for removing a shared library with an Ant command
OptionRequiredDescription
sm.username noSpecifies the username used to access the management features of the Red Hat JBoss Fuse container
sm.password noSpecifies the password used to access the management features of the Red Hat JBoss Fuse container
sm.host noSpecifies the host name where the container is running; the default value is localhost
sm.port noSpecifies the port where the container's RMI registry is listening; the default value is 1099
sm.shared.library.name yesSpecifies the name of the shared library
Torna in cima
Red Hat logoGithubredditYoutubeTwitter

Formazione

Prova, acquista e vendi

Community

Informazioni sulla documentazione di Red Hat

Aiutiamo gli utenti Red Hat a innovarsi e raggiungere i propri obiettivi con i nostri prodotti e servizi grazie a contenuti di cui possono fidarsi. Esplora i nostri ultimi aggiornamenti.

Rendiamo l’open source più inclusivo

Red Hat si impegna a sostituire il linguaggio problematico nel codice, nella documentazione e nelle proprietà web. Per maggiori dettagli, visita il Blog di Red Hat.

Informazioni su Red Hat

Forniamo soluzioni consolidate che rendono più semplice per le aziende lavorare su piattaforme e ambienti diversi, dal datacenter centrale all'edge della rete.

Theme

© 2025 Red Hat