Red Hat Summit Red Hat SummitSupportoConsoleSviluppatoriInizia una provaContatti

Questo contenuto non è disponibile nella lingua selezionata.

12.4. Configuration Tips and Tricks

12.4.1. Defining Default Value for a Property
Copia collegamento

When you define a property, you can provide a default value for it. To define this default value, append the default value to the property name, separated by a colon (:). For example: 
${server.port:8080}
Copy to Clipboard Toggle word wrap

12.4.2. Defining Environment Properties
Copia collegamento

12.4.2.1. Environment Properties as Component Properties
Copia collegamento

You can define properties as component properties. This way of defining properties is not dynamic, but you can override each property defined here, by properties defined in a prioritized scope. 
<sy:switchyard ...>
  <sca:composite ...>
    <sca:component ...>
      ...
      <sca:property value="test" name="MY_PROPERTY"/>
    </sca:component>
    <sca:service...>
      ...
    </sca:service>
    <sca:reference ...>
      ...
    </sca:reference>

  </sca:composite>
  ...
</sy:switchyard>
Copy to Clipboard Toggle word wrap

12.4.2.2. Environment Properties as Composite Properties
Copia collegamento

You can define properties as composite properties. This way of defining properties is not dynamic, but you can override every property defined here, by properties defined in a prioritized scope. 
<sy:switchyard ...>
  <sca:composite ...>
    <sca:component ...>
      ...
    </sca:component>
    <sca:service...>
      ...
    </sca:service>
    <sca:reference ...>
      <sca:interface.java .../>
      <file:binding.file name="FileBinding">
        <file:directory>/tmp</file:directory>
        <file:fileName>${MY_FILENAME}</file:fileName>
        <file:produce/>
      </file:binding.file>
    </sca:reference>
    <sca:property value="test.txt" name="MY_FILENAME"/>
  </sca:composite>
  ...
</sy:switchyard>
Copy to Clipboard Toggle word wrap

12.4.2.3. Environment Properties as Domain Properties
Copia collegamento

You can define properties as composite properties. This way of defining properties is not dynamic, but you can override each property defined here, by properties defined in a prioritized scope. 
<sy:switchyard ...>
  <sca:composite ...>
    <sca:component ...>
      ...
    </sca:component>
    <sca:service...>
      ...
    </sca:service>
    <sca:reference ...>
      ...
    </sca:reference>
  </sca:composite>
  ...
  <sca:domain>
    <sca:property value="test.txt" name="MY_FILENAME"/>
  </sca:domain>
 </sy:switchyard>
Copy to Clipboard Toggle word wrap

12.4.2.4. Environment Properties in a Static or Dynamic Module
Copia collegamento

You can externalize properties from the SwitchYard application by defining them outside the switchyard.xml file. For example, inside a module. For this to work, you need to define your module as shown below: 
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<module xmlns="urn:jboss:module:1.0" name="com.examples.switchyard.properties">
    <properties>
        <property name="ftp_server.host" value="localhost"/>
        <property name="ftp_server.port" value="22"/>
    </properties>
</module>
Copy to Clipboard Toggle word wrap
Once you define your module, use these properties in your SwitchYard application as shown below: 
<ftp:binding.sftp>
    <ftp:host>${ftp_server.host}</ftp:host>
    <ftp:port>${ftp_server.port}</ftp:port>
   ....
</ftp:binding.sftp>
Copy to Clipboard Toggle word wrap

12.4.2.5. Environment Properties as OS Environment Properties
Copia collegamento

You can load properties from OS environment properties. Every environment property is accessible by prefixing it with env. For example, in bash, you can use a property defined as export MY_PROPERTY=test, in your SwitchYard application as shown below: 
<ftp:binding.sftp>
    <ftp:host>${env.MY_PROPERTY}</ftp:host>
   ....
</ftp:binding.sftp>
Copy to Clipboard Toggle word wrap
Application server has the ability to define properties directly in its configuration either by file or with the console. This configuration is dynamically updated and persisted.
Add the configuration to the server definition as shown below: 
<server name="xyz.home" xmlns="urn:jboss:domain:1.0">
    <extensions>
        <extension module="org.jboss.as.clustering.infinispan"/>
        <extension module="org.jboss.as.clustering.jgroups"/>
        <extension module="org.jboss.as.connector"/>
        ....
    </extensions>
    <system-properties>
        <property name="MY_PROPERTY" value="test"/>
    </system-properties>
Copy to Clipboard Toggle word wrap
This property is used in your SwitchYard application as: 
<ftp:binding.sftp>
    <ftp:host>${MY_PROPERTY}</ftp:host>
   ....
</ftp:binding.sftp>
Copy to Clipboard Toggle word wrap

12.4.2.7. Environment Properties as Application Server Properties from File
Copia collegamento

You can pass a properties file as an argument to JBoss Application Server (AS) startup script to load all the properties in the file and make them accessible. You can start the AS as shown below: 
$./standalone.sh -P file:///data/production.properties
Copy to Clipboard Toggle word wrap
Here are some alternatives:
  • -P=<url>: Load system properties from the given URL
  • -P<url>: Load system properties from the given URL
  • --properties=<url>: Load system properties from the given URL
In your SwitchYard application, you can use these properties as: 
<ftp:binding.sftp>
    <ftp:host>${env.MY_PROPERTY}</ftp:host>
   ....
</ftp:binding.sftp>
Copy to Clipboard Toggle word wrap

12.4.3. Loading Properties for Test
Copia collegamento

In tests, you can add and resolve properties at the top level. The PropertyMixIn eases working with properties: 
   private PropertyMixIn pmi;

   ...
   pmi.set("test.property.name", "test");
   pmi.set("test.property.name", Integer.valueOf(100));
   ...
   pmi.get("test.property.name");
   ...
Copy to Clipboard Toggle word wrap
In case you need access to the PropertyResolver for tests, where a MixIn is not applicable, you can use TestPropertyResolver.INSTANCE and avoid setting command line parameters as shown below: 
TestPropertyResolver.INSTANCE.getMap().put("name","value");
Copy to Clipboard Toggle word wrap
Torna in cima
Red Hat logoGithubredditYoutubeTwitter

Formazione

Prova, acquista e vendi

Community

Informazioni sulla documentazione di Red Hat

Aiutiamo gli utenti Red Hat a innovarsi e raggiungere i propri obiettivi con i nostri prodotti e servizi grazie a contenuti di cui possono fidarsi. Esplora i nostri ultimi aggiornamenti.

Rendiamo l’open source più inclusivo

Red Hat si impegna a sostituire il linguaggio problematico nel codice, nella documentazione e nelle proprietà web. Per maggiori dettagli, visita il Blog di Red Hat.

Informazioni su Red Hat

Forniamo soluzioni consolidate che rendono più semplice per le aziende lavorare su piattaforme e ambienti diversi, dal datacenter centrale all'edge della rete.

Theme

© 2025 Red Hat