Red Hat Summit Red Hat SummitSupportoConsoleSviluppatoriInizia una provaContatti

Questo contenuto non è disponibile nella lingua selezionata.

10.7. Durable Subscriber

Overview
Copia collegamento

A durable subscriber, as shown in Figure 10.6, “Durable Subscriber Pattern”, is a consumer that wants to receive all of the messages sent over a particular publish-subscribe channel, including messages sent while the consumer is disconnected from the messaging system. This requires the messaging system to store messages for later replay to the disconnected consumer. There also has to be a mechanism for a consumer to indicate that it wants to establish a durable subscription. Generally, a publish-subscribe channel (or topic) can have both durable and non-durable subscribers, which behave as follows:
  • non-durable subscriber—Can have two states: connected and disconnected. While a non-durable subscriber is connected to a topic, it receives all of the topic's messages in real time. However, a non-durable subscriber never receives messages sent to the topic while the subscriber is disconnected.
  • durable subscriber—Can have two states: connected and inactive. The inactive state means that the durable subscriber is disconnected from the topic, but wants to receive the messages that arrive in the interim. When the durable subscriber reconnects to the topic, it receives a replay of all the messages sent while it was inactive.

Figure 10.6. Durable Subscriber Pattern

Durable subscriber pattern
View larger image
Durable subscriber pattern

JMS durable subscriber
Copia collegamento

The JMS component implements the durable subscriber pattern. In order to set up a durable subscription on a JMS endpoint, you must specify a client ID, which identifies this particular connection, and a durable subscription name, which identifies the durable subscriber. For example, the following route sets up a durable subscription to the JMS topic, news, with a client ID of conn01 and a durable subscription name of John.Doe: 
from("jms:topic:news?clientId=conn01&durableSubscriptionName=John.Doe").
    to("cxf:bean:newsprocessor");
Copy to Clipboard Toggle word wrap
You can also set up a durable subscription using the ActiveMQ endpoint: 
from("activemq:topic:news?clientId=conn01&durableSubscriptionName=John.Doe").
    to("cxf:bean:newsprocessor");
Copy to Clipboard Toggle word wrap
If you want to process the incoming messages concurrently, you can use a SEDA endpoint to fan out the route into multiple, parallel segments, as follows: 
from("jms:topic:news?clientId=conn01&durableSubscriptionName=John.Doe").
    to("seda:fanout");

from("seda:fanout").to("cxf:bean:newsproc01");
from("seda:fanout").to("cxf:bean:newsproc02");
from("seda:fanout").to("cxf:bean:newsproc03");
Copy to Clipboard Toggle word wrap
Where each message is processed only once, because the SEDA component supports the competing consumers pattern.

Alternative example
Copia collegamento

Another alternative is to combine the Message Dispatcher or Content-Based Router with File component or JPA component components for durable subscribers then something like SEDA component for non-durable.
Here is a simple example of creating durable subscribers to a chapter "JMS" in "Apache Camel Component Reference" topic
Using the Fluent Builders 
 from("direct:start").to("activemq:topic:foo");
 
 from("activemq:topic:foo?clientId=1&durableSubscriptionName=bar1").to("mock:result1");
 
 from("activemq:topic:foo?clientId=2&durableSubscriptionName=bar2").to("mock:result2");
Copy to Clipboard Toggle word wrap
Using the Spring XML Extensions 
 <route>
     <from uri="direct:start"/>
     <to uri="activemq:topic:foo"/>
 </route>
 
 <route>
     <from uri="activemq:topic:foo?clientId=1&durableSubscriptionName=bar1"/>
     <to uri="mock:result1"/>
 </route>
 
 <route>
     <from uri="activemq:topic:foo?clientId=2&durableSubscriptionName=bar2"/>
     <to uri="mock:result2"/>
 </route>
Copy to Clipboard Toggle word wrap
Here is another example of JMS durable subscribers, but this time using virtual topics (recommended by AMQ over durable subscriptions)
Using the Fluent Builders 
 from("direct:start").to("activemq:topic:VirtualTopic.foo");
 
 from("activemq:queue:Consumer.1.VirtualTopic.foo").to("mock:result1");
 
 from("activemq:queue:Consumer.2.VirtualTopic.foo").to("mock:result2");
Copy to Clipboard Toggle word wrap
Using the Spring XML Extensions 
 <route>
     <from uri="direct:start"/>
     <to uri="activemq:topic:VirtualTopic.foo"/>
 </route>
 
 <route>
     <from uri="activemq:queue:Consumer.1.VirtualTopic.foo"/>
     <to uri="mock:result1"/>
 </route>
 
 <route>
     <from uri="activemq:queue:Consumer.2.VirtualTopic.foo"/>
     <to uri="mock:result2"/>
 </route>
Copy to Clipboard Toggle word wrap
Torna in cima
Red Hat logoGithubredditYoutubeTwitter

Formazione

Prova, acquista e vendi

Community

Informazioni sulla documentazione di Red Hat

Aiutiamo gli utenti Red Hat a innovarsi e raggiungere i propri obiettivi con i nostri prodotti e servizi grazie a contenuti di cui possono fidarsi. Esplora i nostri ultimi aggiornamenti.

Rendiamo l’open source più inclusivo

Red Hat si impegna a sostituire il linguaggio problematico nel codice, nella documentazione e nelle proprietà web. Per maggiori dettagli, visita il Blog di Red Hat.

Informazioni su Red Hat

Forniamo soluzioni consolidate che rendono più semplice per le aziende lavorare su piattaforme e ambienti diversi, dal datacenter centrale all'edge della rete.

Theme

© 2025 Red Hat