Chapter 228. MongoDB Component (deprecated)

This operation retrieves only one element from the collection whose _id field matches the content of the IN message body. The incoming object can be anything that has an equivalent to a BSON type. See http://bsonspec.org//specification[http://bsonspec.org//specification] and http://www.mongodb.org/display/DOCS/Java+Types.

from("direct:findById")
    .to("mongodb:myDb?database=flights&collection=tickets&operation=findById")
    .to("mock:resultFindById");

Use this operation to retrieve just one element from the collection that matches a MongoDB query. The query object is extracted from the IN message body, i.e. it should be of type DBObject or convertible to DBObject. It can be a JSON String or a Hashmap. See #Type conversions for more info.

Example with no query (returns any object of the collection):

from("direct:findOneByQuery")
    .to("mongodb:myDb?database=flights&collection=tickets&operation=findOneByQuery")
    .to("mock:resultFindOneByQuery");

Example with a query (returns one matching result):

from("direct:findOneByQuery")
    .setBody().constant("{ \"name\": \"Raul Kripalani\" }")
    .to("mongodb:myDb?database=flights&collection=tickets&operation=findOneByQuery")
    .to("mock:resultFindOneByQuery");

The findAll operation returns all documents matching a query, or none at all, in which case all documents contained in the collection are returned. The query object is extracted from the IN message body, i.e. it should be of type DBObject or convertible to DBObject. It can be a JSON String or a Hashmap. See #Type conversions for more info.

Example with no query (returns all object in the collection):

from("direct:findAll")
    .to("mongodb:myDb?database=flights&collection=tickets&operation=findAll")
    .to("mock:resultFindAll");

Example with a query (returns all matching results):

from("direct:findAll")
    .setBody().constant("{ \"name\": \"Raul Kripalani\" }")
    .to("mongodb:myDb?database=flights&collection=tickets&operation=findAll")
    .to("mock:resultFindAll");

Paging and efficient retrieval is supported via the following headers:

You can also "stream" the documents returned from the server into your route by including outputType=DBCursor (Camel 2.16+) as an endpoint option which may prove simpler than setting the above headers. This hands your Exchange the DBCursor from the Mongo driver, just as if you were executing the findAll() within the Mongo shell, allowing your route to iterate over the results. By default and without this option, this component will load the documents from the driver’s cursor into a List and return this to your route - which may result in a large number of in-memory objects. Remember, with a DBCursor do not ask for the number of documents matched - see the MongoDB documentation site for details.

Example with option outputType=DBCursor and batch size :

from("direct:findAll")
    .setHeader(MongoDbConstants.BATCH_SIZE).constant(10)
    .setBody().constant("{ \"name\": \"Raul Kripalani\" }")
    .to("mongodb:myDb?database=flights&collection=tickets&operation=findAll&outputType=DBCursor")
    .to("mock:resultFindAll");

The findAll operation will also return the following OUT headers to enable you to iterate through result pages if you are using paging:

Returns the total number of objects in a collection, returning a Long as the OUT message body.
The following example will count the number of records in the "dynamicCollectionName" collection. Notice how dynamicity is enabled, and as a result, the operation will not run against the "notableScientists" collection, but against the "dynamicCollectionName" collection.

// from("direct:count").to("mongodb:myDb?database=tickets&collection=flights&operation=count&dynamicity=true");
Long result = template.requestBodyAndHeader("direct:count", "irrelevantBody", MongoDbConstants.COLLECTION, "dynamicCollectionName");
assertTrue("Result is not of type Long", result instanceof Long);

From Camel 2.14 onwards you can provide a com.mongodb.DBObject object in the message body as a query, and operation will return the amount of documents matching this criteria.

DBObject query = ...
Long count = template.requestBodyAndHeader("direct:count", query, MongoDbConstants.COLLECTION, "dynamicCollectionName");

Query operations will, by default, return the matching objects in their entirety (with all their fields). If your documents are large and you only require retrieving a subset of their fields, you can specify a field filter in all query operations, simply by setting the relevant DBObject (or type convertible to DBObject, such as a JSON String, Map, etc.) on the CamelMongoDbFieldsFilter header, constant shortcut: MongoDbConstants.FIELDS_FILTER.

Here is an example that uses MongoDB’s BasicDBObjectBuilder to simplify the creation of DBObjects. It retrieves all fields except _id and boringField:

// route: from("direct:findAll").to("mongodb:myDb?database=flights&collection=tickets&operation=findAll")
DBObject fieldFilter = BasicDBObjectBuilder.start().add("_id", 0).add("boringField", 0).get();
Object result = template.requestBodyAndHeader("direct:findAll", (Object) null, MongoDbConstants.FIELDS_FILTER, fieldFilter);

There is a often a requirement to fetch the min/max record from a collection based on sorting by a particular field. In Mongo the operation is performed using syntax similar to:

db.collection.find().sort({_id: -1}).limit(1)
// or
db.collection.findOne({$query:{},$orderby:{_id:-1}})

In a Camel route the SORT_BY header can be used with the findOneByQuery operation to achieve the same result. If the FIELDS_FILTER header is also specified the operation will return a single field/value pair that can be passed directly to another component (for example, a parameterized MyBatis SELECT query). This example demonstrates fetching the temporally newest document from a collection and reducing the result to a single field, based on the documentTimestamp field:

.from("direct:someTriggeringEvent")
.setHeader(MongoDbConstants.SORT_BY).constant("{\"documentTimestamp\": -1}")
.setHeader(MongoDbConstants.FIELDS_FILTER).constant("{\"documentTimestamp\": 1}")
.setBody().constant("{}")
.to("mongodb:myDb?database=local&collection=myDemoCollection&operation=findOneByQuery")
.to("direct:aMyBatisParameterizedSelect")
;

Inserts an new object into the MongoDB collection, taken from the IN message body. Type conversion is attempted to turn it into DBObject or a List.
Two modes are supported: single insert and multiple insert. For multiple insert, the endpoint will expect a List, Array or Collections of objects of any type, as long as they are - or can be converted to - DBObject. All objects are inserted at once. The endpoint will intelligently decide which backend operation to invoke (single or multiple insert) depending on the input.

Example:

from("direct:insert")
    .to("mongodb:myDb?database=flights&collection=tickets&operation=insert");

The operation will return a WriteResult, and depending on the WriteConcern or the value of the invokeGetLastError option, getLastError() would have been called already or not. If you want to access the ultimate result of the write operation, you need to retrieve the CommandResult by calling getLastError() or getCachedLastError() on the WriteResult. Then you can verify the result by calling CommandResult.ok(), CommandResult.getErrorMessage() and/or CommandResult.getException().

Note that the new object’s _id must be unique in the collection. If you don’t specify the value, MongoDB will automatically generate one for you. But if you do specify it and it is not unique, the insert operation will fail (and for Camel to notice, you will need to enable invokeGetLastError or set a WriteConcern that waits for the write result).

This is not a limitation of the component, but it is how things work in MongoDB for higher throughput. If you are using a custom _id, you are expected to ensure at the application level that is unique (and this is a good practice too).

Since Camel 2.15: OID(s) of the inserted record(s) is stored in the message header under CamelMongoOid key (MongoDbConstants.OID constant). The value stored is org.bson.types.ObjectId for single insert or java.util.List<org.bson.types.ObjectId> if multiple records have been inserted.

The save operation is equivalent to an upsert (UPdate, inSERT) operation, where the record will be updated, and if it doesn’t exist, it will be inserted, all in one atomic operation. MongoDB will perform the matching based on the _id field.

Beware that in case of an update, the object is replaced entirely and the usage of MongoDB’s $modifiers is not permitted. Therefore, if you want to manipulate the object if it already exists, you have two options:

For example:

from("direct:insert")
    .to("mongodb:myDb?database=flights&collection=tickets&operation=save");

Update one or multiple records on the collection. Requires a List<DBObject> as the IN message body containing exactly 2 elements:

A header with key CamelMongoDbRecordsAffected will be returned (MongoDbConstants.RECORDS_AFFECTED constant) with the number of records updated (copied from WriteResult.getN()).

Supports the following IN message headers:

For example, the following will update all records whose filterField field equals true by setting the value of the "scientist" field to "Darwin":

// route: from("direct:update").to("mongodb:myDb?database=science&collection=notableScientists&operation=update");
DBObject filterField = new BasicDBObject("filterField", true);
DBObject updateObj = new BasicDBObject("$set", new BasicDBObject("scientist", "Darwin"));
Object result = template.requestBodyAndHeader("direct:update", new Object[] {filterField, updateObj}, MongoDbConstants.MULTIUPDATE, true);

Remove matching records from the collection. The IN message body will act as the removal filter query, and is expected to be of type DBObject or a type convertible to it.
The following example will remove all objects whose field 'conditionField' equals true, in the science database, notableScientists collection:

// route: from("direct:remove").to("mongodb:myDb?database=science&collection=notableScientists&operation=remove");
DBObject conditionField = new BasicDBObject("conditionField", true);
Object result = template.requestBody("direct:remove", conditionField);

A header with key CamelMongoDbRecordsAffected is returned (MongoDbConstants.RECORDS_AFFECTED constant) with type int, containing the number of records deleted (copied from WriteResult.getN()).

Available as of Camel 2.21

Performs write operations in bulk with controls for order of execution. Requires a List<WriteModel<DBObject>> as the IN message body containing commands for insert, update, and delete operations.

The following example will insert a new scientist "Pierre Curie", update record with id "5" by setting the value of the "scientist" field to "Marie Curie" and delete record with id "3" :

// route: from("direct:bulkWrite").to("mongodb:myDb?database=science&collection=notableScientists&operation=bulkWrite");
List<WriteModel<DBObject>> bulkOperations = Arrays.asList(
            new InsertOneModel<>(new BasicDBObject("scientist", "Pierre Curie")),
            new UpdateOneModel<>(new BasicDBObject("_id", "5"),
                                 new BasicDBObject("$set", new BasicDBObject("scientist", "Marie Curie"))),
            new DeleteOneModel<>(new BasicDBObject("_id", "3")));

BulkWriteResult result = template.requestBody("direct:bulkWrite", bulkOperations, BulkWriteResult.class);

By default, operations are executed in order and interrupted on the first write error without processing any remaining write operations in the list. To instruct MongoDB to continue to process remaining write operations in the list, set the CamelMongoDbBulkOrdered IN message header to false. Unordered operations are executed in parallel and this behavior is not guaranteed.

Available as of Camel 2.14

Perform a aggregation with the given pipeline contained in the body. Aggregations could be long and heavy operations. Use with care.

// route: from("direct:aggregate").to("mongodb:myDb?database=science&collection=notableScientists&operation=aggregate");
from("direct:aggregate")
    .setBody().constant("[{ $match : {$or : [{\"scientist\" : \"Darwin\"},{\"scientist\" : \"Einstein\"}]}},{ $group: { _id: \"$scientist\", count: { $sum: 1 }} } ]")
    .to("mongodb:myDb?database=science&collection=notableScientists&operation=aggregate")
    .to("mock:resultAggregate");

Supports the following IN message headers:

Efficient retrieval is supported via outputType=DBCursor.

You can also "stream" the documents returned from the server into your route by including outputType=DBCursor (Camel 2.21+) as an endpoint option which may prove simpler than setting the above headers. This hands your Exchange the DBCursor from the Mongo driver, just as if you were executing the aggregate() within the Mongo shell, allowing your route to iterate over the results. By default and without this option, this component will load the documents from the driver’s cursor into a List and return this to your route - which may result in a large number of in-memory objects. Remember, with a DBCursor do not ask for the number of documents matched - see the MongoDB documentation site for details.

Example with option outputType=DBCursor and batch size:

// route: from("direct:aggregate").to("mongodb:myDb?database=science&collection=notableScientists&operation=aggregate");
from("direct:aggregate")
    .setHeader(MongoDbConstants.BATCH_SIZE).constant(10)
    .setBody().constant("[{ $match : {$or : [{\"scientist\" : \"Darwin\"},{\"scientist\" : \"Einstein\"}]}},{ $group: { _id: \"$scientist\", count: { $sum: 1 }} } ]")
    .to("mongodb:myDb?database=science&collection=notableScientists&operation=aggregate&outputType=DBCursor")
    .to("mock:resultAggregate");

Equivalent of running the db.stats() command in the MongoDB shell, which displays useful statistic figures about the database.
For example:

> db.stats();
{
    "db" : "test",
    "collections" : 7,
    "objects" : 719,
    "avgObjSize" : 59.73296244784423,
    "dataSize" : 42948,
    "storageSize" : 1000058880,
    "numExtents" : 9,
    "indexes" : 4,
    "indexSize" : 32704,
    "fileSize" : 1275068416,
    "nsSizeMB" : 16,
    "ok" : 1
}

Usage example:

// from("direct:getDbStats").to("mongodb:myDb?database=flights&collection=tickets&operation=getDbStats");
Object result = template.requestBody("direct:getDbStats", "irrelevantBody");
assertTrue("Result is not of type DBObject", result instanceof DBObject);

The operation will return a data structure similar to the one displayed in the shell, in the form of a DBObject in the OUT message body.

Equivalent of running the db.collection.stats() command in the MongoDB shell, which displays useful statistic figures about the collection.
For example:

> db.camelTest.stats();
{
    "ns" : "test.camelTest",
    "count" : 100,
    "size" : 5792,
    "avgObjSize" : 57.92,
    "storageSize" : 20480,
    "numExtents" : 2,
    "nindexes" : 1,
    "lastExtentSize" : 16384,
    "paddingFactor" : 1,
    "flags" : 1,
    "totalIndexSize" : 8176,
    "indexSizes" : {
        "_id_" : 8176
    },
    "ok" : 1
}

Usage example:

// from("direct:getColStats").to("mongodb:myDb?database=flights&collection=tickets&operation=getColStats");
Object result = template.requestBody("direct:getColStats", "irrelevantBody");
assertTrue("Result is not of type DBObject", result instanceof DBObject);

The operation will return a data structure similar to the one displayed in the shell, in the form of a DBObject in the OUT message body.

Available as of Camel 2.15

Run the body as a command on database. Usefull for admin operation as getting host informations, replication or sharding status.

Collection parameter is not use for this operation.

// route: from("command").to("mongodb:myDb?database=science&operation=command");
DBObject commandBody = new BasicDBObject("hostInfo", "1");
Object result = template.requestBody("direct:command", commandBody);