Questo contenuto non è disponibile nella lingua selezionata.

8.14. Troubleshooting Snapshots

Situation
Snapshot creation fails.
Step 1
Check if the bricks are thinly provisioned by following these steps:
1. Execute the mount command and check the device name mounted on the brick path. For example:
```
# mount
/dev/mapper/snap_lvgrp-snap_lgvol on /rhgs/brick1 type xfs (rw)
/dev/mapper/snap_lvgrp1-snap_lgvol1 on /rhgs/brick2 type xfs (rw)
```
2. Run the following command to check if the device has a LV pool name.
```
lvs device-name
```
  For example:
```
#  lvs -o pool_lv /dev/mapper/snap_lvgrp-snap_lgvol
   Pool
   snap_thnpool
```
  If the Pool field is empty, then the brick is not thinly provisioned.
3. Ensure that the brick is thinly provisioned, and retry the snapshot create command.
Step 2
Check if the bricks are down by following these steps:
1. Execute the following command to check the status of the volume:
```
# gluster volume status VOLNAME
```
2. If any bricks are down, then start the bricks by executing the following command:
```
# gluster volume start VOLNAME force
```
3. To verify if the bricks are up, execute the following command:
```
# gluster volume status VOLNAME
```
4. Retry the snapshot create command.
Step 3
Check if the node is down by following these steps:
1. Execute the following command to check the status of the nodes:
```
# gluster volume status VOLNAME
```
2. If a brick is not listed in the status, then execute the following command:
```
# gluster pool list
```
3. If the status of the node hosting the missing brick is Disconnected, then power-up the node.
4. Retry the snapshot create command.
Step 4
Check if rebalance is in progress by following these steps:
1. Execute the following command to check the rebalance status:
```
gluster volume rebalance VOLNAME status
```
2. If rebalance is in progress, wait for it to finish.
3. Retry the snapshot create command.
Situation
Snapshot delete fails.
Step 1
Check if the server quorum is met by following these steps:
1. Execute the following command to check the peer status:
```
# gluster pool list
```
2. If nodes are down, and the cluster is not in quorum, then power up the nodes.
3. To verify if the cluster is in quorum, execute the following command:
```
# gluster pool list
```
4. Retry the snapshot delete command.
Situation
Snapshot delete command fails on some node(s) during commit phase, leaving the system inconsistent.
Solution
1. Identify the node(s) where the delete command failed. This information is available in the delete command's error output. For example:
```
# gluster snapshot delete snapshot1
Deleting snap will erase all the information about the snap. Do you still want to continue? (y/n) y
snapshot delete: failed: Commit failed on 10.00.00.02. Please check log file for details.
Snapshot command failed
```
2. On the node where the delete command failed, bring down glusterd using the following command:
  On RHEL 7 and RHEL 8, run
```
# systemctl stop glusterd
```
  On RHEL 6, run
```
# service glusterd stop
```
  Important
  Red Hat Gluster Storage is not supported on Red Hat Enterprise Linux 6 (RHEL 6) from 3.5 Batch Update 1 onwards. See Version Details table in section Red Hat Gluster Storage Software Components and Versions of the Installation Guide
3. Delete that particular snaps repository in /var/lib/glusterd/snaps/ from that node. For example:
```
# rm -rf /var/lib/glusterd/snaps/snapshot1
```
4. Start glusterd on that node using the following command:
  On RHEL 7 and RHEL 8, run
```
# systemctl start glusterd
```
  On RHEL 6, run
```
# service glusterd start.
```
  Important
  Red Hat Gluster Storage is not supported on Red Hat Enterprise Linux 6 (RHEL 6) from 3.5 Batch Update 1 onwards. See Version Details table in section Red Hat Gluster Storage Software Components and Versions of the Installation Guide
5. Repeat the 2nd, 3rd, and 4th steps on all the nodes where the commit failed as identified in the 1st step.
6. Retry deleting the snapshot. For example:
```
# gluster snapshot delete snapshot1
```
Situation
Snapshot restore fails.
Step 1
Check if the server quorum is met by following these steps:
1. Execute the following command to check the peer status:
```
# gluster pool list
```
2. If nodes are down, and the cluster is not in quorum, then power up the nodes.
3. To verify if the cluster is in quorum, execute the following command:
```
# gluster pool list
```
4. Retry the snapshot restore command.
Step 2
Check if the volume is in Stop state by following these steps:
1. Execute the following command to check the volume info:
```
# gluster volume info VOLNAME
```
2. If the volume is in Started state, then stop the volume using the following command:
```
gluster volume stop VOLNAME
```
3. Retry the snapshot restore command.
Situation
Snapshot commands fail.
Step 1
Check if there is a mismatch in the operating versions by following these steps:
1. Open the following file and check for the operating version:
```
/var/lib/glusterd/glusterd.info
```
  If the operating-version is lesser than 30000, then the snapshot commands are not supported in the version the cluster is operating on.
2. Upgrade all nodes in the cluster to Red Hat Gluster Storage 3.2 or higher.
3. Retry the snapshot command.
Situation
After rolling upgrade, snapshot feature does not work.
Solution
You must ensure to make the following changes on the cluster to enable snapshot:
1. Restart the volume using the following commands.
```
# gluster volume stop VOLNAME
# gluster volume start VOLNAME
```
2. Restart glusterd services on all nodes.
  On RHEL 7 and RHEL 8, run
```
# systemctl restart glusterd
```
  On RHEL 6, run
```
# service glusterd restart
```
  Important
  Red Hat Gluster Storage is not supported on Red Hat Enterprise Linux 6 (RHEL 6) from 3.5 Batch Update 1 onwards. See Version Details table in section Red Hat Gluster Storage Software Components and Versions of the Installation Guide

Formazione

Prova, acquista e vendi

Community

Informazioni sulla documentazione di Red Hat

Aiutiamo gli utenti Red Hat a innovarsi e raggiungere i propri obiettivi con i nostri prodotti e servizi grazie a contenuti di cui possono fidarsi.

Rendiamo l’open source più inclusivo

Red Hat si impegna a sostituire il linguaggio problematico nel codice, nella documentazione e nelle proprietà web. Per maggiori dettagli, visita ilBlog di Red Hat.

Informazioni su Red Hat

Forniamo soluzioni consolidate che rendono più semplice per le aziende lavorare su piattaforme e ambienti diversi, dal datacenter centrale all'edge della rete.

© 2024 Red Hat, Inc.