Red Hat SummitQuesto contenuto non è disponibile nella lingua selezionata.
Chapter 4. Deploying NFS-Ganesha on Red Hat Gluster Storage
NFS-Ganesha can be installed using any of the following methods:
- Installing NFS-Ganesha using yum
- Installing NFS-Ganesha during an ISO Installation
Warning
Gluster-NFS is considered deprecated as of Red Hat Gluster Storage 3.5. Red Hat no longer recommends the use of Gluster-NFS, and does not support its use in new deployments and existing deployments that upgrade to Red Hat Gluster Storage 3.5.3. You can use NFS-Ganesha as an alternative.
4.1. Prerequisites
Copia collegamentoCollegamento copiato negli appunti!
To install NFS-Ganesha on Red Hat Gluster Storage you require access to the installation media either through an ISO or a properly configured software repository.
For Red Hat Gluster Storage 3.5 on Red Hat Enterprise Linux 8.2 and later
Enable the channel where the NFS-Ganesha packages are available:
- If you have registered your machine using Red Hat Subscription Manager, enable the repository by running the following command:
# subscription-manager repos --enable=rh-gluster-3-nfs-for-rhel-8-x86_64-rpmsTo add the HA repository, execute the following command:# subscription-manager repos --enable=rhel-8-for-x86_64-highavailability-rpms - If you have registered your machine using Satellite server, enable the channel by running the following command:
# rhn-channel --add --channel rh-gluster-3-nfs-for-rhel-8-x86_64-rpmsTo subscribe to the HA channel, execute the following command:# rhn-channel --add --channel rhel-8-for-x86_64-highavailability-rpms
For Red Hat Gluster Storage 3.5 on Red Hat Enterprise Linux 7.7 and later
Enable the channel where the NFS-Ganesha packages are available:
- If you have registered your machine using Red Hat Subscription Manager, enable the repository by running the following command:
# subscription-manager repos --enable=rh-gluster-3-nfs-for-rhel-7-server-rpmsTo add the HA repository, execute the following command:# subscription-manager repos --enable=rhel-ha-for-rhel-7-server-rpms - If you have registered your machine using Satellite server, enable the channel by running the following command:
# rhn-channel --add --channel rhel-x86_64-server-7-rh-gluster-3-nfsTo subscribe to the HA channel, execute the following command:# rhn-channel --add --channel rhel-x86_64-server-ha-7
'%20d='M201.5%20305.5c-13.8%200-24.9-11.1-24.9-24.6%200-13.8%2011.1-24.9%2024.9-24.9%2013.6%200%2024.6%2011.1%2024.6%2024.9%200%2013.6-11.1%2024.6-24.6%2024.6zM504%20256c0%20137-111%20248-248%20248S8%20393%208%20256%20119%208%20256%208s248%20111%20248%20248zm-132.3-41.2c-9.4%200-17.7%203.9-23.8%2010-22.4-15.5-52.6-25.5-86.1-26.6l17.4-78.3%2055.4%2012.5c0%2013.6%2011.1%2024.6%2024.6%2024.6%2013.8%200%2024.9-11.3%2024.9-24.9s-11.1-24.9-24.9-24.9c-9.7%200-18%205.8-22.1%2013.8l-61.2-13.6c-3-.8-6.1%201.4-6.9%204.4l-19.1%2086.4c-33.2%201.4-63.1%2011.3-85.5%2026.8-6.1-6.4-14.7-10.2-24.1-10.2-34.9%200-46.3%2046.9-14.4%2062.8-1.1%205-1.7%2010.2-1.7%2015.5%200%2052.6%2059.2%2095.2%20132%2095.2%2073.1%200%20132.3-42.6%20132.3-95.2%200-5.3-.6-10.8-1.9-15.8%2031.3-16%2019.8-62.5-14.9-62.5zM302.8%20331c-18.2%2018.2-76.1%2017.9-93.6%200-2.2-2.2-6.1-2.2-8.3%200-2.5%202.5-2.5%206.4%200%208.6%2022.8%2022.8%2087.3%2022.8%20110.2%200%202.5-2.2%202.5-6.1%200-8.6-2.2-2.2-6.1-2.2-8.3%200zm7.7-75c-13.6%200-24.6%2011.1-24.6%2024.9%200%2013.6%2011.1%2024.6%2024.6%2024.6%2013.8%200%2024.9-11.1%2024.9-24.6%200-13.8-11-24.9-24.9-24.9z'/%3e%3c/svg%3e){kind=small}