Chapter 1. OpenShift Data Foundation deployed using dynamic devices

Procedure

1. Identify the node that needs to be replaced.

2. Mark the node as unschedulable using the following command:

   $ oc adm cordon <node_name>

   Copy to Clipboard Toggle word wrap

3. Drain the node using the following command:

   $ oc adm drain <node_name> --force --delete-emptydir-data=true --ignore-daemonsets

   Copy to Clipboard Toggle word wrap
   Important

   This activity may take at least 5-10 minutes or more. Ceph errors generated during this period are temporary and are automatically resolved when the new node is labeled and functional.

4. Delete the node using the following command:

   $ oc delete nodes <node_name>

   Copy to Clipboard Toggle word wrap
5. Create a new AWS machine instance with the required infrastructure. See Platform requirements.
6. Create a new OpenShift Container Platform node using the new AWS machine instance.

7. Check for certificate signing requests (CSRs) related to OpenShift Container Platform that are in Pending state:

   $ oc get csr

   Copy to Clipboard Toggle word wrap

8. Approve all required OpenShift Container Platform CSRs for the new node:

   $ oc adm certificate approve <Certificate_Name>

   Copy to Clipboard Toggle word wrap
9. Click Compute Nodes, confirm if the new node is in Ready state.

10. Apply the OpenShift Data Foundation label to the new node.

    From the web user interface

    1. For the new node, click Action Menu (⋮) Edit Labels
    2. Add cluster.ocs.openshift.io/openshift-storage and click Save.

    From the command line interface

    • Execute the following command to apply the OpenShift Data Foundation label to the new node:

      $ oc label node <new_node_name> cluster.ocs.openshift.io/openshift-storage=""

      Copy to Clipboard Toggle word wrap

Verification steps

1. Execute the following command and verify that the new node is present in the output:

   $ oc get nodes --show-labels | grep cluster.ocs.openshift.io/openshift-storage= |cut -d' ' -f1

   Copy to Clipboard Toggle word wrap

2. Click Workloads Pods, confirm that at least the following pods on the new node are in Running state:

   • csi-cephfsplugin-*
   • csi-rbdplugin-*
3. Verify that all other required OpenShift Data Foundation pods are in Running state.

4. Verify that new OSD pods are running on the replacement node.

   $ oc get pods -o wide -n openshift-storage| egrep -i new-node-name | egrep osd

   Copy to Clipboard Toggle word wrap

5. Optional: If cluster-wide encryption is enabled on the cluster, verify that the new OSD devices are encrypted.

   For each of the new nodes identified in previous step, do the following:

   1. Create a debug pod and open a chroot environment for the selected host(s).

      $ oc debug node/<node name>
      $ chroot /host

      Copy to Clipboard Toggle word wrap

   2. Run “lsblk” and check for the “crypt” keyword beside the ocs-deviceset name(s)

      $ lsblk

      Copy to Clipboard Toggle word wrap
6. If verification steps fail, contact Red Hat Support.

Procedure

1. Log in to OpenShift Web Console and click Compute Nodes.
2. Identify the node that needs to be replaced. Take a note of its Machine Name.

3. Mark the node as unschedulable using the following command:

   $ oc adm cordon <node_name>

   Copy to Clipboard Toggle word wrap

4. Drain the node using the following command:

   $ oc adm drain <node_name> --force --delete-emptydir-data=true --ignore-daemonsets

   Copy to Clipboard Toggle word wrap
   Important

   This activity may take at least 5-10 minutes or more. Ceph errors generated during this period are temporary and are automatically resolved when the new node is labeled and functional.

5. Click Compute Machines. Search for the required machine.
6. Besides the required machine, click the Action menu (⋮) Delete Machine.
7. Click Delete to confirm the machine deletion. A new machine is automatically created.

8. Wait for new machine to start and transition into Running state.

   Important

   This activity may take at least 5-10 minutes or more.

9. Click Compute Nodes, confirm if the new node is in Ready state.

10. Apply the OpenShift Data Foundation label to the new node using any one of the following:

    From User interface

    1. For the new node, click Action Menu (⋮) Edit Labels
    2. Add cluster.ocs.openshift.io/openshift-storage and click Save.

    From Command line interface

    • Execute the following command to apply the OpenShift Data Foundation label to the new node:

      $ oc label node <new_node_name> cluster.ocs.openshift.io/openshift-storage=""

      Copy to Clipboard Toggle word wrap

Verification steps

1. Execute the following command and verify that the new node is present in the output:

   $ oc get nodes --show-labels | grep cluster.ocs.openshift.io/openshift-storage= |cut -d' ' -f1

   Copy to Clipboard Toggle word wrap

2. Click Workloads Pods, confirm that at least the following pods on the new node are in Running state:

   • csi-cephfsplugin-*
   • csi-rbdplugin-*
3. Verify that all other required OpenShift Data Foundation pods are in Running state.

4. Verify that new OSD pods are running on the replacement node.

   $ oc get pods -o wide -n openshift-storage| egrep -i new-node-name | egrep osd

   Copy to Clipboard Toggle word wrap

5. Optional: If cluster-wide encryption is enabled on the cluster, verify that the new OSD devices are encrypted.

   For each of the new nodes identified in previous step, do the following:

   1. Create a debug pod and open a chroot environment for the selected host(s).

      $ oc debug node/<node name>
      $ chroot /host

      Copy to Clipboard Toggle word wrap

   2. Run “lsblk” and check for the “crypt” keyword beside the ocs-deviceset name(s)

      $ lsblk

      Copy to Clipboard Toggle word wrap
6. If verification steps fail, contact Red Hat Support.

Procedure

1. Identify the AWS machine instance of the node that needs to be replaced.
2. Log in to AWS and terminate the identified AWS machine instance.
3. Create a new AWS machine instance with the required infrastructure. See platform requirements.
4. Create a new OpenShift Container Platform node using the new AWS machine instance.

5. Check for certificate signing requests (CSRs) related to OpenShift Container Platform that are in Pending state:

   $ oc get csr

   Copy to Clipboard Toggle word wrap

6. Approve all required OpenShift Container Platform CSRs for the new node:

   $ oc adm certificate approve <Certificate_Name>

   Copy to Clipboard Toggle word wrap
7. Click Compute Nodes, confirm if the new node is in Ready state.

8. Apply the OpenShift Data Foundation label to the new node using any one of the following:

   From User interface

   1. For the new node, click Action Menu (⋮) Edit Labels
   2. Add cluster.ocs.openshift.io/openshift-storage and click Save.

   From Command line interface

   • Execute the following command to apply the OpenShift Data Foundation label to the new node:

     $ oc label node <new_node_name> cluster.ocs.openshift.io/openshift-storage=""

     Copy to Clipboard Toggle word wrap

Verification steps

1. Execute the following command and verify that the new node is present in the output:

   $ oc get nodes --show-labels | grep cluster.ocs.openshift.io/openshift-storage= |cut -d' ' -f1

   Copy to Clipboard Toggle word wrap

2. Click Workloads Pods, confirm that at least the following pods on the new node are in Running state:

   • csi-cephfsplugin-*
   • csi-rbdplugin-*
3. Verify that all other required OpenShift Data Foundation pods are in Running state.

4. Verify that new OSD pods are running on the replacement node.

   $ oc get pods -o wide -n openshift-storage| egrep -i new-node-name | egrep osd

   Copy to Clipboard Toggle word wrap

5. Optional: If cluster-wide encryption is enabled on the cluster, verify that the new OSD devices are encrypted.

   For each of the new nodes identified in previous step, do the following:

   1. Create a debug pod and open a chroot environment for the selected host(s).

      $ oc debug node/<node name>
      $ chroot /host

      Copy to Clipboard Toggle word wrap

   2. Run “lsblk” and check for the “crypt” keyword beside the ocs-deviceset name(s)

      $ lsblk

      Copy to Clipboard Toggle word wrap
6. If verification steps fail, contact Red Hat Support.

Procedure

1. Log in to OpenShift Web Console and click Compute Nodes.
2. Identify the faulty node and click on its Machine Name.
3. Click Actions Edit Annotations, and click Add More.
4. Add machine.openshift.io/exclude-node-draining and click Save.
5. Click Actions Delete Machine, and click Delete.

6. A new machine is automatically created, wait for new machine to start.

   Important

   This activity may take at least 5-10 minutes or more. Ceph errors generated during this period are temporary and are automatically resolved when the new node is labeled and functional.

7. Click Compute Nodes, confirm if the new node is in Ready state.

8. Apply the OpenShift Data Foundation label to the new node using any one of the following:

   From User interface

   1. For the new node, click Action Menu (⋮) Edit Labels
   2. Add cluster.ocs.openshift.io/openshift-storage and click Save.

   From Command line interface

   • Execute the following command to apply the OpenShift Data Foundation label to the new node:

     $ oc label node <new_node_name> cluster.ocs.openshift.io/openshift-storage=""

     Copy to Clipboard Toggle word wrap

9. [Optional]: If the failed AWS instance is not removed automatically, terminate the instance from AWS console.

Verification steps

1. Execute the following command and verify that the new node is present in the output:

   $ oc get nodes --show-labels | grep cluster.ocs.openshift.io/openshift-storage= |cut -d' ' -f1

   Copy to Clipboard Toggle word wrap

2. Click Workloads Pods, confirm that at least the following pods on the new node are in Running state:

   • csi-cephfsplugin-*
   • csi-rbdplugin-*
3. Verify that all other required OpenShift Data Foundation pods are in Running state.

4. Verify that new OSD pods are running on the replacement node.

   $ oc get pods -o wide -n openshift-storage| egrep -i new-node-name | egrep osd

   Copy to Clipboard Toggle word wrap

5. Optional: If cluster-wide encryption is enabled on the cluster, verify that the new OSD devices are encrypted.

   For each of the new nodes identified in previous step, do the following:

   1. Create a debug pod and open a chroot environment for the selected host(s).

      $ oc debug node/<node name>
      $ chroot /host

      Copy to Clipboard Toggle word wrap

   2. Run “lsblk” and check for the “crypt” keyword beside the ocs-deviceset name(s)

      $ lsblk

      Copy to Clipboard Toggle word wrap
6. If verification steps fail, contact Red Hat Support.

Procedure

1. Identify the node and its VM that needs to be replaced.

2. Mark the node as unschedulable using the following command:

   $ oc adm cordon <node_name>

   Copy to Clipboard Toggle word wrap

3. Drain the node using the following command:

   $ oc adm drain <node_name> --force --delete-emptydir-data=true --ignore-daemonsets

   Copy to Clipboard Toggle word wrap
   Important

   This activity may take at least 5-10 minutes or more. Ceph errors generated during this period are temporary and are automatically resolved when the new node is labeled and functional.

4. Delete the node using the following command:

   $ oc delete nodes <node_name>

   Copy to Clipboard Toggle word wrap

5. Log in to vSphere and terminate the identified VM.

   Important

   VM should be deleted only from the inventory and not from the disk.

6. Create a new VM on vSphere with the required infrastructure. See Platform requirements.
7. Create a new OpenShift Container Platform worker node using the new VM.

8. Check for certificate signing requests (CSRs) related to OpenShift Container Platform that are in Pending state:

   $ oc get csr

   Copy to Clipboard Toggle word wrap

9. Approve all required OpenShift Container Platform CSRs for the new node:

   $ oc adm certificate approve <Certificate_Name>

   Copy to Clipboard Toggle word wrap
10. Click Compute Nodes, confirm if the new node is in Ready state.

11. Apply the OpenShift Data Foundation label to the new node using any one of the following:

    From User interface

    1. For the new node, click Action Menu (⋮) Edit Labels
    2. Add cluster.ocs.openshift.io/openshift-storage and click Save.

    From Command line interface

    • Execute the following command to apply the OpenShift Data Foundation label to the new node:

      $ oc label node <new_node_name> cluster.ocs.openshift.io/openshift-storage=""

      Copy to Clipboard Toggle word wrap

Verification steps

1. Execute the following command and verify that the new node is present in the output:

   $ oc get nodes --show-labels | grep cluster.ocs.openshift.io/openshift-storage= |cut -d' ' -f1

   Copy to Clipboard Toggle word wrap

2. Click Workloads Pods, confirm that at least the following pods on the new node are in Running state:

   • csi-cephfsplugin-*
   • csi-rbdplugin-*
3. Verify that all other required OpenShift Data Foundation pods are in Running state.

4. Verify that new OSD pods are running on the replacement node.

   $ oc get pods -o wide -n openshift-storage| egrep -i new-node-name | egrep osd

   Copy to Clipboard Toggle word wrap

5. Optional: If cluster-wide encryption is enabled on the cluster, verify that the new OSD devices are encrypted.

   For each of the new nodes identified in previous step, do the following:

   1. Create a debug pod and open a chroot environment for the selected host(s).

      $ oc debug node/<node name>
      $ chroot /host

      Copy to Clipboard Toggle word wrap

   2. Run “lsblk” and check for the “crypt” keyword beside the ocs-deviceset name(s)

      $ lsblk

      Copy to Clipboard Toggle word wrap
6. If verification steps fail, contact Red Hat Support.

Procedure

1. Log in to OpenShift Web Console and click Compute Nodes.
2. Identify the node that needs to be replaced. Take a note of its Machine Name.

3. Mark the node as unschedulable using the following command:

   $ oc adm cordon <node_name>

   Copy to Clipboard Toggle word wrap

4. Drain the node using the following command:

   $ oc adm drain <node_name> --force --delete-emptydir-data=true --ignore-daemonsets

   Copy to Clipboard Toggle word wrap
   Important

   This activity may take at least 5-10 minutes or more. Ceph errors generated during this period are temporary and are automatically resolved when the new node is labeled and functional.

5. Click Compute Machines. Search for the required machine.
6. Besides the required machine, click the Action menu (⋮) Delete Machine.
7. Click Delete to confirm the machine deletion. A new machine is automatically created.

8. Wait for new machine to start and transition into Running state.

   Important

   This activity may take at least 5-10 minutes or more.

9. Click Compute Nodes, confirm if the new node is in Ready state.

10. Apply the OpenShift Data Foundation label to the new node using any one of the following:

    From User interface

    1. For the new node, click Action Menu (⋮) Edit Labels
    2. Add cluster.ocs.openshift.io/openshift-storage and click Save.

    From Command line interface

    • Execute the following command to apply the OpenShift Data Foundation label to the new node:

      $ oc label node <new_node_name> cluster.ocs.openshift.io/openshift-storage=""

      Copy to Clipboard Toggle word wrap

Verification steps

1. Execute the following command and verify that the new node is present in the output:

   $ oc get nodes --show-labels | grep cluster.ocs.openshift.io/openshift-storage= |cut -d' ' -f1

   Copy to Clipboard Toggle word wrap

2. Click Workloads Pods, confirm that at least the following pods on the new node are in Running state:

   • csi-cephfsplugin-*
   • csi-rbdplugin-*
3. Verify that all other required OpenShift Data Foundation pods are in Running state.

4. Verify that new OSD pods are running on the replacement node.

   $ oc get pods -o wide -n openshift-storage| egrep -i new-node-name | egrep osd

   Copy to Clipboard Toggle word wrap

5. Optional: If cluster-wide encryption is enabled on the cluster, verify that the new OSD devices are encrypted.

   For each of the new nodes identified in previous step, do the following:

   1. Create a debug pod and open a chroot environment for the selected host(s).

      $ oc debug node/<node name>
      $ chroot /host

      Copy to Clipboard Toggle word wrap

   2. Run “lsblk” and check for the “crypt” keyword beside the ocs-deviceset name(s)

      $ lsblk

      Copy to Clipboard Toggle word wrap
6. If verification steps fail, contact Red Hat Support.

Procedure

1. Identify the node and its VM that needs to be replaced.

2. Delete the node using the following command:

   $ oc delete nodes <node_name>

   Copy to Clipboard Toggle word wrap

3. Log in to vSphere and terminate the identified VM.

   Important

   VM should be deleted only from the inventory and not from the disk.

4. Create a new VM on vSphere with the required infrastructure. See Platform requirements.
5. Create a new OpenShift Container Platform worker node using the new VM.

6. Check for certificate signing requests (CSRs) related to OpenShift Container Platform that are in Pending state:

   $ oc get csr

   Copy to Clipboard Toggle word wrap

7. Approve all required OpenShift Container Platform CSRs for the new node:

   $ oc adm certificate approve <Certificate_Name>

   Copy to Clipboard Toggle word wrap
8. Click Compute Nodes, confirm if the new node is in Ready state.

9. Apply the OpenShift Data Foundation label to the new node using any one of the following:

   From User interface

   1. For the new node, click Action Menu (⋮) Edit Labels
   2. Add cluster.ocs.openshift.io/openshift-storage and click Save.

   From Command line interface

   • Execute the following command to apply the OpenShift Data Foundation label to the new node:

     $ oc label node <new_node_name> cluster.ocs.openshift.io/openshift-storage=""

     Copy to Clipboard Toggle word wrap

Verification steps

1. Execute the following command and verify that the new node is present in the output:

   $ oc get nodes --show-labels | grep cluster.ocs.openshift.io/openshift-storage= |cut -d' ' -f1

   Copy to Clipboard Toggle word wrap

2. Click Workloads Pods, confirm that at least the following pods on the new node are in Running state:

   • csi-cephfsplugin-*
   • csi-rbdplugin-*
3. Verify that all other required OpenShift Data Foundation pods are in Running state.

4. Verify that new OSD pods are running on the replacement node.

   $ oc get pods -o wide -n openshift-storage| egrep -i new-node-name | egrep osd

   Copy to Clipboard Toggle word wrap

5. Optional: If cluster-wide encryption is enabled on the cluster, verify that the new OSD devices are encrypted.

   For each of the new nodes identified in previous step, do the following:

   1. Create a debug pod and open a chroot environment for the selected host(s).

      $ oc debug node/<node name>
      $ chroot /host

      Copy to Clipboard Toggle word wrap

   2. Run “lsblk” and check for the “crypt” keyword beside the ocs-deviceset name(s)

      $ lsblk

      Copy to Clipboard Toggle word wrap
6. If verification steps fail, contact Red Hat Support.

Procedure

1. Log in to OpenShift Web Console and click Compute Nodes.
2. Identify the faulty node and click on its Machine Name.
3. Click Actions Edit Annotations, and click Add More.
4. Add machine.openshift.io/exclude-node-draining and click Save.
5. Click Actions Delete Machine, and click Delete.

6. A new machine is automatically created, wait for new machine to start.

   Important

   This activity may take at least 5-10 minutes or more. Ceph errors generated during this period are temporary and are automatically resolved when the new node is labeled and functional.

7. Click Compute Nodes, confirm if the new node is in Ready state.

8. Apply the OpenShift Data Foundation label to the new node using any one of the following:

   From User interface

   1. For the new node, click Action Menu (⋮) Edit Labels
   2. Add cluster.ocs.openshift.io/openshift-storage and click Save.

   From Command line interface

   • Execute the following command to apply the OpenShift Data Foundation label to the new node:

     $ oc label node <new_node_name> cluster.ocs.openshift.io/openshift-storage=""

     Copy to Clipboard Toggle word wrap

9. [Optional]: If the failed VM is not removed automatically, terminate the VM from vSphere.

Verification steps

1. Execute the following command and verify that the new node is present in the output:

   $ oc get nodes --show-labels | grep cluster.ocs.openshift.io/openshift-storage= |cut -d' ' -f1

   Copy to Clipboard Toggle word wrap

2. Click Workloads Pods, confirm that at least the following pods on the new node are in Running state:

   • csi-cephfsplugin-*
   • csi-rbdplugin-*
3. Verify that all other required OpenShift Data Foundation pods are in Running state.

4. Verify that new OSD pods are running on the replacement node.

   $ oc get pods -o wide -n openshift-storage| egrep -i new-node-name | egrep osd

   Copy to Clipboard Toggle word wrap

5. Optional: If cluster-wide encryption is enabled on the cluster, verify that the new OSD devices are encrypted.

   For each of the new nodes identified in previous step, do the following:

   1. Create a debug pod and open a chroot environment for the selected host(s).

      $ oc debug node/<node name>
      $ chroot /host

      Copy to Clipboard Toggle word wrap

   2. Run “lsblk” and check for the “crypt” keyword beside the ocs-deviceset name(s)

      $ lsblk

      Copy to Clipboard Toggle word wrap
6. If verification steps fail, contact Red Hat Support.

Procedure

1. Log in to OpenShift Web Console and click Compute Nodes.
2. Identify the node that needs to be replaced. Take a note of its Machine Name.

3. Mark the node as unschedulable using the following command:

   $ oc adm cordon <node_name>

   Copy to Clipboard Toggle word wrap

4. Drain the node using the following command:

   $ oc adm drain <node_name> --force --delete-emptydir-data=true --ignore-daemonsets

   Copy to Clipboard Toggle word wrap
   Important

   This activity may take at least 5-10 minutes or more. Ceph errors generated during this period are temporary and are automatically resolved when the new node is labeled and functional.

5. Click Compute Machines. Search for the required machine.
6. Besides the required machine, click the Action menu (⋮) Delete Machine.

7. Click Delete to confirm the machine deletion. A new machine is automatically created. Wait for new machine to start and transition into Running state.

   Important

   This activity may take at least 5-10 minutes or more.

8. Click Compute Nodes, confirm if the new node is in Ready state.

9. Apply the OpenShift Data Foundation label to the new node using any one of the following:

   From User interface

   1. For the new node, click Action Menu (⋮) Edit Labels.
   2. Add cluster.ocs.openshift.io/openshift-storage and click Save.

   From Command line interface

   • Execute the following command to apply the OpenShift Data Foundation label to the new node:

   $ oc label node <new_node_name> cluster.ocs.openshift.io/openshift-storage=""

   Copy to Clipboard Toggle word wrap

Verification steps

1. Execute the following command and verify that the new node is present in the output:

   $ oc get nodes --show-labels | grep cluster.ocs.openshift.io/openshift-storage= |cut -d' ' -f1

   Copy to Clipboard Toggle word wrap

2. Click Workloads Pods, confirm that at least the following pods on the new node are in Running state:

   • csi-cephfsplugin-*
   • csi-rbdplugin-*
3. Verify that all other required OpenShift Data Foundation pods are in Running state.

4. Verify that new OSD pods are running on the replacement node.

   $ oc get pods -o wide -n openshift-storage| egrep -i new-node-name | egrep osd

   Copy to Clipboard Toggle word wrap

5. Optional: If cluster-wide encryption is enabled on the cluster, verify that the new OSD devices are encrypted.

   For each of the new nodes identified in previous step, do the following:

   1. Create a debug pod and open a chroot environment for the selected host(s).

      $ oc debug node/<node name>
      $ chroot /host

      Copy to Clipboard Toggle word wrap

   2. Run “lsblk” and check for the “crypt” keyword beside the ocs-deviceset name(s)

      $ lsblk

      Copy to Clipboard Toggle word wrap
6. If verification steps fail, contact Red Hat Support.

Procedure

1. Log in to OpenShift Web Console and click Compute Nodes.
2. Identify the faulty node. Take a note of its Machine Name.

3. Log in to Red Hat Virtualization Administration Portal and remove the virtual disks associated with mon and OSDs from the failed Virtual Machine.

   This step is required so that the disks are not deleted when the VM instance is deleted as part of the Delete machine step.

   Important

   Do not select the Remove Permanently option when removing the disk(s).

4. In the OpenShift Web Console, click Compute Machines. Search for the required machine.
5. Click Actions Edit Annotations, and click Add More.
6. Add machine.openshift.io/exclude-node-draining and click Save.

7. Click Actions Delete Machine, and click Delete.

   A new machine is automatically created, wait for new machine to start.

   Important

   This activity may take at least 5-10 minutes or more. Ceph errors generated during this period are temporary and are automatically resolved when the new node is labeled and functional.

8. Click Compute Nodes, confirm if the new node is in Ready state.

9. Apply the OpenShift Data Foundation label to the new node using any one of the following:

   From User interface

   1. For the new node, click Action Menu (⋮) Edit Labels.
   2. Add cluster.ocs.openshift.io/openshift-storage and click Save.

   From Command line interface

   • Execute the following command to apply the OpenShift Data Foundation label to the new node:

     $ oc label node <new_node_name> cluster.ocs.openshift.io/openshift-storage=""

     Copy to Clipboard Toggle word wrap

10. Optional: If the failed VM is not removed automatically, remove the VM from Red Hat Virtualization Administration Portal.

Verification steps

1. Execute the following command and verify that the new node is present in the output:

   $ oc get nodes --show-labels | grep cluster.ocs.openshift.io/openshift-storage= |cut -d' ' -f1

   Copy to Clipboard Toggle word wrap

2. Click Workloads Pods, confirm that at least the following pods on the new node are in Running state:

   • csi-cephfsplugin-*
   • csi-rbdplugin-*
3. Verify that all other required OpenShift Data Foundation pods are in Running state.

4. Verify that new OSD pods are running on the replacement node.

   $ oc get pods -o wide -n openshift-storage| egrep -i new-node-name | egrep osd

   Copy to Clipboard Toggle word wrap

5. Optional: If cluster-wide encryption is enabled on the cluster, verify that the new OSD devices are encrypted.

   For each of the new nodes identified in previous step, do the following:

   1. Create a debug pod and open a chroot environment for the selected host(s).

      $ oc debug node/<node name>
      $ chroot /host

      Copy to Clipboard Toggle word wrap

   2. Run “lsblk” and check for the “crypt” keyword beside the ocs-deviceset name(s)

      $ lsblk

      Copy to Clipboard Toggle word wrap
6. If verification steps fail, contact Red Hat Support.

Procedure

1. Log in to OpenShift Web Console and click Compute Nodes.
2. Identify the node that needs to be replaced. Take a note of its Machine Name.

3. Mark the node as unschedulable using the following command:

   $ oc adm cordon <node_name>

   Copy to Clipboard Toggle word wrap

4. Drain the node using the following command:

   $ oc adm drain <node_name> --force --delete-emptydir-data=true --ignore-daemonsets

   Copy to Clipboard Toggle word wrap
   Important

   This activity may take at least 5-10 minutes or more. Ceph errors generated during this period are temporary and are automatically resolved when the new node is labeled and functional.

5. Click Compute Machines. Search for the required machine.
6. Besides the required machine, click the Action menu (⋮) Delete Machine.
7. Click Delete to confirm the machine deletion. A new machine is automatically created.

8. Wait for new machine to start and transition into Running state.

   Important

   This activity may take at least 5-10 minutes or more.

9. Click Compute Nodes, confirm if the new node is in Ready state.

10. Apply the OpenShift Data Foundation label to the new node using any one of the following:

    From User interface

    1. For the new node, click Action Menu (⋮) Edit Labels
    2. Add cluster.ocs.openshift.io/openshift-storage and click Save.

    From Command line interface

    • Execute the following command to apply the OpenShift Data Foundation label to the new node:

      $ oc label node <new_node_name> cluster.ocs.openshift.io/openshift-storage=""

      Copy to Clipboard Toggle word wrap

Verification steps

1. Execute the following command and verify that the new node is present in the output:

   $ oc get nodes --show-labels | grep cluster.ocs.openshift.io/openshift-storage= |cut -d' ' -f1

   Copy to Clipboard Toggle word wrap

2. Click Workloads Pods, confirm that at least the following pods on the new node are in Running state:

   • csi-cephfsplugin-*
   • csi-rbdplugin-*
3. Verify that all other required OpenShift Data Foundation pods are in Running state.

4. Verify that new OSD pods are running on the replacement node.

   $ oc get pods -o wide -n openshift-storage| egrep -i new-node-name | egrep osd

   Copy to Clipboard Toggle word wrap

5. Optional: If cluster-wide encryption is enabled on the cluster, verify that the new OSD devices are encrypted.

   For each of the new nodes identified in previous step, do the following:

   1. Create a debug pod and open a chroot environment for the selected host(s).

      $ oc debug node/<node name>
      $ chroot /host

      Copy to Clipboard Toggle word wrap

   2. Run “lsblk” and check for the “crypt” keyword beside the ocs-deviceset name(s)

      $ lsblk

      Copy to Clipboard Toggle word wrap
6. If verification steps fail, contact Red Hat Support.

Procedure

1. Log in to OpenShift Web Console and click Compute Nodes.
2. Identify the faulty node and click on its Machine Name.
3. Click Actions Edit Annotations, and click Add More.
4. Add machine.openshift.io/exclude-node-draining and click Save.
5. Click Actions Delete Machine, and click Delete.

6. A new machine is automatically created, wait for new machine to start.

   Important

   This activity may take at least 5-10 minutes or more. Ceph errors generated during this period are temporary and are automatically resolved when the new node is labeled and functional.

7. Click Compute Nodes, confirm if the new node is in Ready state.

8. Apply the OpenShift Data Foundation label to the new node using any one of the following:

   From User interface

   1. For the new node, click Action Menu (⋮) Edit Labels
   2. Add cluster.ocs.openshift.io/openshift-storage and click Save.

   From Command line interface

   • Execute the following command to apply the OpenShift Data Foundation label to the new node:

     $ oc label node <new_node_name> cluster.ocs.openshift.io/openshift-storage=""

     Copy to Clipboard Toggle word wrap

9. [Optional]: If the failed Azure instance is not removed automatically, terminate the instance from Azure console.

Verification steps

1. Execute the following command and verify that the new node is present in the output:

   $ oc get nodes --show-labels | grep cluster.ocs.openshift.io/openshift-storage= |cut -d' ' -f1

   Copy to Clipboard Toggle word wrap

2. Click Workloads Pods, confirm that at least the following pods on the new node are in Running state:

   • csi-cephfsplugin-*
   • csi-rbdplugin-*
3. Verify that all other required OpenShift Data Foundation pods are in Running state.

4. Verify that new OSD pods are running on the replacement node.

   $ oc get pods -o wide -n openshift-storage| egrep -i new-node-name | egrep osd

   Copy to Clipboard Toggle word wrap

5. Optional: If cluster-wide encryption is enabled on the cluster, verify that the new OSD devices are encrypted.

   For each of the new nodes identified in previous step, do the following:

   1. Create a debug pod and open a chroot environment for the selected host(s).

      $ oc debug node/<node name>
      $ chroot /host

      Copy to Clipboard Toggle word wrap

   2. Run “lsblk” and check for the “crypt” keyword beside the ocs-deviceset name(s)

      $ lsblk

      Copy to Clipboard Toggle word wrap
6. If verification steps fail, contact Red Hat Support.