Red Hat Summit Red Hat SummitSupportoConsoleSviluppatoriInizia una provaContatti

Questo contenuto non è disponibile nella lingua selezionata.

Chapter 16. Tenant networking with IPv6

16.1. Overview of project networking
Copia collegamento

This chapter contains information about implementing IPv6 subnets in a Red Hat OpenStack Platform (RHOSP) project network. In addition to project networking, with RHOSP director, you can configure IPv6-native deployments for the overcloud nodes.

RHOSP supports IPv6 in project networks. IPv6 subnets are created within existing project networks, and support a number of address assignment modes: Stateless Address Autoconfiguration (SLAAC), Stateful DHCPv6, and Stateless DHCPv6.

16.2. IPv6 subnet options
Copia collegamento

Create IPv6 subnets using the openstack subnet create command. You can also specify the address mode and the Router Advertisement mode. Use the following list to understand the possible combinations of options that you can include with the openstack subnet create command.

Expand
RA ModeAddress ModeResult

ipv6_ra_mode=not set

ipv6-address-mode=slaac

The instance receives an IPv6 address from the external router (not managed by OpenStack Networking) using SLAAC.

ipv6_ra_mode=not set

ipv6-address-mode=dhcpv6-stateful

The instance receives an IPv6 address and optional information from OpenStack Networking (dnsmasq) using DHCPv6 stateful.

ipv6_ra_mode=not set

ipv6-address-mode=dhcpv6-stateless

The instance receives an IPv6 address from the external router using SLAAC, and optional information from OpenStack Networking (dnsmasq) using DHCPv6 stateless.

ipv6_ra_mode=slaac

ipv6-address-mode=not-set

The instance uses SLAAC to receive an IPv6 address from OpenStack Networking (radvd).

ipv6_ra_mode=dhcpv6-stateful

ipv6-address-mode=not-set

The instance receives an IPv6 address and optional information from an external DHCPv6 server using DHCPv6 stateful.

ipv6_ra_mode=dhcpv6-stateless

ipv6-address-mode=not-set

The instance receives an IPv6 address from OpenStack Networking (radvd) using SLAAC, and optional information from an external DHCPv6 server using DHCPv6 stateless.

ipv6_ra_mode=slaac

ipv6-address-mode=slaac

The instance receives an IPv6 address from OpenStack Networking (radvd) using SLAAC.

ipv6_ra_mode=dhcpv6-stateful

ipv6-address-mode=dhcpv6-stateful

The instance receives an IPv6 address from OpenStack Networking (dnsmasq) using DHCPv6 stateful, and optional information from OpenStack Networking (dnsmasq) using DHCPv6 stateful.

ipv6_ra_mode=dhcpv6-stateless

ipv6-address-mode=dhcpv6-stateless

The instance receives an IPv6 address from OpenStack Networking (radvd) using SLAAC, and optional information from OpenStack Networking (dnsmasq) using DHCPv6 stateless.

16.3. Create an IPv6 subnet using Stateful DHCPv6
Copia collegamento

Complete the steps in this procedure to create an IPv6 subnet in a project network using some of the options in section 17.1. First, gather the necessary project and network information, then include this information in the openstack subnet create command.

Note

OpenStack Networking supports only EUI-64 IPv6 address assignment for SLAAC. This allows for simplified IPv6 networking, as hosts self-assign addresses based on the base 64-bits plus the MAC address. You cannot create subnets with a different netmask and address_assign_type of SLAAC.

  1. Retrieve the project ID of the Project where you want to create the IPv6 subnet. These values are unique between OpenStack deployments, so your values differ from the values in this example. 

    # openstack project list
+----------------------------------+----------+
| ID                               | Name     |
+----------------------------------+----------+
| 25837c567ed5458fbb441d39862e1399 |    QA    |
| f59f631a77264a8eb0defc898cb836af |  admin   |
| 4e2e1951e70643b5af7ed52f3ff36539 |   demo   |
| 8561dff8310e4cd8be4b6fd03dc8acf5 | services |
+----------------------------------+----------+
    Copy to Clipboard Toggle word wrap

  2. Retrieve a list of all networks present in OpenStack Networking (neutron), and note the name of the network that you want to host the IPv6 subnet: 

    # openstack network list
+--------------------------------------+------------------+-------------------------------------------------------------+
| id                                   | name             | subnets                                                     |
+--------------------------------------+------------------+-------------------------------------------------------------+
| 8357062a-0dc2-4146-8a7f-d2575165e363 | private          | c17f74c4-db41-4538-af40-48670069af70 10.0.0.0/24            |
| 31d61f7d-287e-4ada-ac29-ed7017a54542 | public           | 303ced03-6019-4e79-a21c-1942a460b920 172.24.4.224/28        |
| 6aff6826-4278-4a35-b74d-b0ca0cbba340 | database-servers |                                                             |
+--------------------------------------+------------------+-------------------------------------------------------------+
    Copy to Clipboard Toggle word wrap

  3. Include the project ID and network name in the openstack subnet create command: 

    # openstack subnet create --ip-version 6 --ipv6-address-mode dhcpv6-stateful --project 25837c567ed5458fbb441d39862e1399 --network database-servers --subnet-range fdf8:f53b:82e4::53/125 subnet_name

Created a new subnet:
+-------------------+--------------------------------------------------------------+
| Field             | Value                                                        |
+-------------------+--------------------------------------------------------------+
| allocation_pools  | {"start": "fdf8:f53b:82e4::52", "end": "fdf8:f53b:82e4::56"} |
| cidr              | fdf8:f53b:82e4::53/125                                       |
| dns_nameservers   |                                                              |
| enable_dhcp       | True                                                         |
| gateway_ip        | fdf8:f53b:82e4::51                                           |
| host_routes       |                                                              |
| id                | cdfc3398-997b-46eb-9db1-ebbd88f7de05                         |
| ip_version        | 6                                                            |
| ipv6_address_mode | dhcpv6-stateful                                              |
| ipv6_ra_mode      |                                                              |
| name              |                                                              |
| network_id        | 6aff6826-4278-4a35-b74d-b0ca0cbba340                         |
| tenant_id         | 25837c567ed5458fbb441d39862e1399                             |
+-------------------+--------------------------------------------------------------+
    Copy to Clipboard Toggle word wrap

  4. Validate this configuration by reviewing the network list. Note that the entry for database-servers now reflects the newly created IPv6 subnet: 

    # openstack network list
+--------------------------------------+------------------+-------------------------------------------------------------+
| id                                   | name             | subnets                                                     |
+--------------------------------------+------------------+-------------------------------------------------------------+
| 6aff6826-4278-4a35-b74d-b0ca0cbba340 | database-servers | cdfc3398-997b-46eb-9db1-ebbd88f7de05 fdf8:f53b:82e4::50/125 |
| 8357062a-0dc2-4146-8a7f-d2575165e363 | private          | c17f74c4-db41-4538-af40-48670069af70 10.0.0.0/24            |
| 31d61f7d-287e-4ada-ac29-ed7017a54542 | public           | 303ced03-6019-4e79-a21c-1942a460b920 172.24.4.224/28        |
+--------------------------------------+------------------+-------------------------------------------------------------+
    Copy to Clipboard Toggle word wrap

    As a result of this configuration, instances that the QA project creates can receive a DHCP IPv6 address when added to the database-servers subnet: 

    # openstack server list
+--------------------------------------+------------+--------+------------+-------------+-------------------------------------+
| ID                                   | Name       | Status | Task State | Power State | Networks                            |
+--------------------------------------+------------+--------+------------+-------------+-------------------------------------+
| fad04b7a-75b5-4f96-aed9-b40654b56e03 | corp-vm-01 | ACTIVE | -          | Running     | database-servers=fdf8:f53b:82e4::52 |
+--------------------------------------+------------+--------+------------+-------------+-------------------------------------+
    Copy to Clipboard Toggle word wrap
Torna in cima
Red Hat logoGithubredditYoutubeTwitter

Formazione

Prova, acquista e vendi

Community

Informazioni sulla documentazione di Red Hat

Aiutiamo gli utenti Red Hat a innovarsi e raggiungere i propri obiettivi con i nostri prodotti e servizi grazie a contenuti di cui possono fidarsi. Esplora i nostri ultimi aggiornamenti.

Rendiamo l’open source più inclusivo

Red Hat si impegna a sostituire il linguaggio problematico nel codice, nella documentazione e nelle proprietà web. Per maggiori dettagli, visita il Blog di Red Hat.

Informazioni su Red Hat

Forniamo soluzioni consolidate che rendono più semplice per le aziende lavorare su piattaforme e ambienti diversi, dal datacenter centrale all'edge della rete.

Theme

© 2025 Red Hat