Red Hat Summit Red Hat SummitSupportoConsoleSviluppatoriInizia una provaContatti

Questo contenuto non è disponibile nella lingua selezionata.

Chapter 9. Examples

Use the following examples to understand how to launch a compute instance post-deployment with various network configurations.

Use this example to understand how to launch an instance with the private project network and the provider network after you deploy the all-in-one Red Hat OpenStack Platform environment. This example is based on a single NIC configuration and requires at least three IP addresses.

Prerequisites

To complete this example successfully, you must have the following IP addresses available in your environment:

  • One IP address for the OpenStack services.
  • One IP address for the virtual router to provide connectivity to the project network. This IP address is assigned automatically in this example.
  • At least one IP address for floating IPs on the provider network.

Procedure

  1. Create configuration helper variables: 

    # standalone with project networking and provider networking
export OS_CLOUD=standalone
export GATEWAY=192.168.25.1
export STANDALONE_HOST=192.168.25.2
export PUBLIC_NETWORK_CIDR=192.168.25.0/24
export PRIVATE_NETWORK_CIDR=192.168.100.0/24
export PUBLIC_NET_START=192.168.25.4
export PUBLIC_NET_END=192.168.25.15
export DNS_SERVER=1.1.1.1
    Copy to Clipboard Toggle word wrap

  2. Create a basic flavor: 

    $ openstack flavor create --ram 512 --disk 1 --vcpu 1 --public tiny
    Copy to Clipboard Toggle word wrap

  3. Download CirrOS and create an OpenStack image: 

    $ wget https://download.cirros-cloud.net/0.4.0/cirros-0.4.0-x86_64-disk.img
$ openstack image create cirros --container-format bare --disk-format qcow2 --public --file cirros-0.4.0-x86_64-disk.img
    Copy to Clipboard Toggle word wrap

  4. Configure SSH: 

    $ ssh-keygen -m PEM -t rsa -b 2048 -f ~/.ssh/id_rsa_pem
$ openstack keypair create --public-key ~/.ssh/id_rsa_pem.pub default
    Copy to Clipboard Toggle word wrap

  5. Create a simple network security group: 

    $ openstack security group create basic
    Copy to Clipboard Toggle word wrap

  6. Configure the new network security group:

    1. Enable SSH: 

      $ openstack security group rule create basic --protocol tcp --dst-port 22:22 --remote-ip 0.0.0.0/0
      Copy to Clipboard Toggle word wrap

    2. Enable ping: 

      $ openstack security group rule create --protocol icmp basic
      Copy to Clipboard Toggle word wrap

    3. Enable DNS: 

      $ openstack security group rule create --protocol udp --dst-port 53:53 basic
      Copy to Clipboard Toggle word wrap

  7. Create Neutron networks: 

    $ openstack network create --external --provider-physical-network datacentre --provider-network-type flat public
$ openstack network create --internal private
$ openstack subnet create public-net \
    --subnet-range $PUBLIC_NETWORK_CIDR \
    --no-dhcp \
    --gateway $GATEWAY \
    --allocation-pool start=$PUBLIC_NET_START,end=$PUBLIC_NET_END \
    --network public
$ openstack subnet create private-net \
    --subnet-range $PRIVATE_NETWORK_CIDR \
    --network private
    Copy to Clipboard Toggle word wrap

  8. Create a virtual router: 

    # NOTE: In this case an IP will be automatically assigned
# from the allocation pool for the subnet.
$ openstack router create vrouter
$ openstack router set vrouter --external-gateway public
$ openstack router add subnet vrouter private-net
    Copy to Clipboard Toggle word wrap

  9. Create a floating IP: 

    $ openstack floating ip create public
    Copy to Clipboard Toggle word wrap

  10. Launch the instance: 

    $ openstack server create --flavor tiny --image cirros --key-name default --network private --security-group basic myserver
    Copy to Clipboard Toggle word wrap

  11. Assign the floating IP: 

    $ openstack server add floating ip myserver <FLOATING_IP>
    Copy to Clipboard Toggle word wrap

    Replace FLOATING_IP with the address of the floating IP that you create in a previous step.

  12. Test SSH: 

    ssh cirros@<FLOATING_IP>
    Copy to Clipboard Toggle word wrap

    Replace FLOATING_IP with the address of the floating IP that you create in a previous step.

Network Architecture

Standalone1NIC Tenant Provider

9.2. Example 2: Launching an instance with one NIC on the provider network
Copia collegamento

Use this example to understand how to launch an instance with the provider network after you deploy the all-in-one Red Hat OpenStack Platform environment. This example is based on a single NIC configuration and requires at least four IP addresses.

Prerequisites

To complete this example successfully, you must have the following IP addresses available in your environment:

  • One IP address for the OpenStack services.
  • One IP address for the virtual router to provide connectivity to the project network. This IP address is assigned automatically in this example.
  • One IP address for DHCP on the provider network.
  • At least one IP address for floating IPs on the provider network.

Procedure

  1. Create configuration helper variables: 

    # standalone with project networking and provider networking
export OS_CLOUD=standalone
export GATEWAY=192.168.25.1
export STANDALONE_HOST=192.168.25.2
export VROUTER_IP=192.168.25.3
export PUBLIC_NETWORK_CIDR=192.168.25.0/24
export PUBLIC_NET_START=192.168.25.4
export PUBLIC_NET_END=192.168.25.15
export DNS_SERVER=1.1.1.1
    Copy to Clipboard Toggle word wrap

  2. Create a basic flavor: 

    $ openstack flavor create --ram 512 --disk 1 --vcpu 1 --public tiny
    Copy to Clipboard Toggle word wrap

  3. Download CirrOS and create an OpenStack image: 

    $ wget https://download.cirros-cloud.net/0.4.0/cirros-0.4.0-x86_64-disk.img
$ openstack image create cirros --container-format bare --disk-format qcow2 --public --file cirros-0.4.0-x86_64-disk.img
    Copy to Clipboard Toggle word wrap

  4. Configure SSH: 

    $ ssh-keygen -m PEM -t rsa -b 2048 -f ~/.ssh/id_rsa_pem
$ openstack keypair create --public-key ~/.ssh/id_rsa_pem.pub default
    Copy to Clipboard Toggle word wrap

  5. Create a simple network security group: 

    $ openstack security group create basic
    Copy to Clipboard Toggle word wrap

  6. Configure the new network security group:

    1. Enable SSH: 

      $ openstack security group rule create basic --protocol tcp --dst-port 22:22 --remote-ip 0.0.0.0/0
      Copy to Clipboard Toggle word wrap

    2. Enable ping: 

      $ openstack security group rule create --protocol icmp basic
      Copy to Clipboard Toggle word wrap

  7. Create Neutron networks: 

    $ openstack network create --external --provider-physical-network datacentre --provider-network-type flat public
$ openstack network create --internal private
$ openstack subnet create public-net \
    --subnet-range $PUBLIC_NETWORK_CIDR \
    --gateway $GATEWAY \
    --allocation-pool start=$PUBLIC_NET_START,end=$PUBLIC_NET_END \
    --network public \
    --host-route destination=0.0.0.0/0,gateway=$GATEWAY \
    --dns-nameserver $DNS_SERVER
    Copy to Clipboard Toggle word wrap

  8. Launch the instance: 

    $ openstack server create --flavor tiny --image cirros --key-name default --network public --security-group basic myserver
    Copy to Clipboard Toggle word wrap

  9. Test SSH: 

    ssh cirros@<VM_IP>
    Copy to Clipboard Toggle word wrap

    Replace VM_IP with the address of the virtual machine that you create in the previous step.

Network Architecture

Standalone1NIC Provider

Use this example to understand how to launch an instance with the private project network and the provider network after you deploy the all-in-one Red Hat OpenStack Platform environment. This example is based on a dual NIC configuration and requires at least four IP addresses on the provider network.

Prerequisites

  • One IP address for a gateway on the provider network.
  • One IP address for OpenStack endpoints.
  • One IP address for the virtual router to provide connectivity to the project network. This IP address is assigned automatically in this example.
  • At least one IP address for floating IPs on the provider network.

Procedure

  1. Create configuration helper variables: 

    # standalone with project networking and provider networking
export OS_CLOUD=standalone
export GATEWAY=192.168.25.1
export STANDALONE_HOST=192.168.0.2
export PUBLIC_NETWORK_CIDR=192.168.25.0/24
export PRIVATE_NETWORK_CIDR=192.168.100.0/24
export PUBLIC_NET_START=192.168.25.3
export PUBLIC_NET_END=192.168.25.254
export DNS_SERVER=1.1.1.1
    Copy to Clipboard Toggle word wrap

  2. Create a basic flavor: 

    $ openstack flavor create --ram 512 --disk 1 --vcpu 1 --public tiny
    Copy to Clipboard Toggle word wrap

  3. Download CirrOS and create an OpenStack image: 

    $ wget https://download.cirros-cloud.net/0.4.0/cirros-0.4.0-x86_64-disk.img
$ openstack image create cirros --container-format bare --disk-format qcow2 --public --file cirros-0.4.0-x86_64-disk.img
    Copy to Clipboard Toggle word wrap

  4. Configure SSH: 

    $ ssh-keygen -m PEM -t rsa -b 2048 -f ~/.ssh/id_rsa_pem
$ openstack keypair create --public-key ~/.ssh/id_rsa_pem.pub default
    Copy to Clipboard Toggle word wrap

  5. Create a simple network security group: 

    $ openstack security group create basic
    Copy to Clipboard Toggle word wrap

  6. Configure the new network security group:

    1. Enable SSH: 

      $ openstack security group rule create basic --protocol tcp --dst-port 22:22 --remote-ip 0.0.0.0/0
      Copy to Clipboard Toggle word wrap

    2. Enable ping: 

      $ openstack security group rule create --protocol icmp basic
      Copy to Clipboard Toggle word wrap

    3. Enable DNS: 

      $ openstack security group rule create --protocol udp --dst-port 53:53 basic
      Copy to Clipboard Toggle word wrap

  7. Create Neutron networks: 

    $ openstack network create --external --provider-physical-network datacentre --provider-network-type flat public
$ openstack network create --internal private
$ openstack subnet create public-net \
    --subnet-range $PUBLIC_NETWORK_CIDR \
    --no-dhcp \
    --gateway $GATEWAY \
    --allocation-pool start=$PUBLIC_NET_START,end=$PUBLIC_NET_END \
    --network public
$ openstack subnet create private-net \
    --subnet-range $PRIVATE_NETWORK_CIDR \
    --network private
    Copy to Clipboard Toggle word wrap

  8. Create a virtual router: 

    # NOTE: In this case an IP will be automatically assigned
# from the allocation pool for the subnet.
$ openstack router create vrouter
$ openstack router set vrouter --external-gateway public
$ openstack router add subnet vrouter private-net
    Copy to Clipboard Toggle word wrap

  9. Create a floating IP: 

    $ openstack floating ip create public
    Copy to Clipboard Toggle word wrap

  10. Launch the instance: 

    $ openstack server create --flavor tiny --image cirros --key-name default --network private --security-group basic myserver
    Copy to Clipboard Toggle word wrap

  11. Assign the floating IP: 

    $ openstack server add floating ip myserver <FLOATING_IP>
    Copy to Clipboard Toggle word wrap

    Replace FLOATING_IP with the address of the floating IP that you create in a previous step.

  12. Test SSH: 

    ssh cirros@<FLOATING_IP>
    Copy to Clipboard Toggle word wrap

    Replace FLOATING_IP with the address of the floating IP that you create in a previous step.

Network Architecture

Standalone2NIC Tenant Provider

Torna in cima
Red Hat logoGithubredditYoutubeTwitter

Formazione

Prova, acquista e vendi

Community

Informazioni sulla documentazione di Red Hat

Aiutiamo gli utenti Red Hat a innovarsi e raggiungere i propri obiettivi con i nostri prodotti e servizi grazie a contenuti di cui possono fidarsi. Esplora i nostri ultimi aggiornamenti.

Rendiamo l’open source più inclusivo

Red Hat si impegna a sostituire il linguaggio problematico nel codice, nella documentazione e nelle proprietà web. Per maggiori dettagli, visita il Blog di Red Hat.

Informazioni su Red Hat

Forniamo soluzioni consolidate che rendono più semplice per le aziende lavorare su piattaforme e ambienti diversi, dal datacenter centrale all'edge della rete.

Theme

© 2025 Red Hat