Red Hat SummitQuesto contenuto non è disponibile nella lingua selezionata.
8.6. Fencing the Controller Nodes
Fencing is the process of isolating a node to protect a cluster and its resources. Without fencing, a faulty node can cause data corruption in a cluster.
The director uses Pacemaker to provide a highly available cluster of Controller nodes. Pacemaker uses a process called STONITH (Shoot-The-Other-Node-In-The-Head) to help fence faulty nodes. By default, STONITH is disabled on your cluster and requires manual configuration so that Pacemaker can control the power management of each node in the cluster.
Note
Login to each node as the
heat-admin user from the stack user on the director. The Overcloud creation automatically copies the stack user's SSH key to each node's heat-admin.
Verify you have a running cluster with
pcs status:
Verify that stonith is disabled with
pcs property show:
The Controller nodes contain a set of fencing agents for the various power management devices the director supports. This includes:
|
Device
|
Type
|
|---|---|
fence_ipmilan
|
The Intelligent Platform Management Interface (IPMI)
|
fence_idrac, fence_drac5
|
Dell Remote Access Controller (DRAC)
|
fence_ilo
|
Integrated Lights-Out (iLO)
|
fence_ucs
|
Cisco UCS - For more information, see Configuring Cisco Unified Computing System (UCS) Fencing on an OpenStack High Availability Environment
|
fence_xvm, fence_virt
|
Libvirt and SSH
|
The rest of this section uses the IPMI agent (
fence_ipmilan) as an example.
View a full list of IPMI options that Pacemaker supports:
sudo pcs stonith describe fence_ipmilan
$ sudo pcs stonith describe fence_ipmilan
Each node requires configuration of IPMI devices to control the power management. This involves adding a
stonith device to Pacemaker for each node. Use the following commands for the cluster:
Note
The second command in each example is to prevent the node from asking to fence itself.
For Controller node 0:
sudo pcs stonith create my-ipmilan-for-controller-0 fence_ipmilan pcmk_host_list=overcloud-controller-0 ipaddr=192.0.2.205 login=admin passwd=p@55w0rd! lanplus=1 cipher=1 op monitor interval=60s sudo pcs constraint location my-ipmilan-for-controller-0 avoids overcloud-controller-0
$ sudo pcs stonith create my-ipmilan-for-controller-0 fence_ipmilan pcmk_host_list=overcloud-controller-0 ipaddr=192.0.2.205 login=admin passwd=p@55w0rd! lanplus=1 cipher=1 op monitor interval=60s
$ sudo pcs constraint location my-ipmilan-for-controller-0 avoids overcloud-controller-0
For Controller node 1:
sudo pcs stonith create my-ipmilan-for-controller-1 fence_ipmilan pcmk_host_list=overcloud-controller-1 ipaddr=192.0.2.206 login=admin passwd=p@55w0rd! lanplus=1 cipher=1 op monitor interval=60s sudo pcs constraint location my-ipmilan-for-controller-1 avoids overcloud-controller-1
$ sudo pcs stonith create my-ipmilan-for-controller-1 fence_ipmilan pcmk_host_list=overcloud-controller-1 ipaddr=192.0.2.206 login=admin passwd=p@55w0rd! lanplus=1 cipher=1 op monitor interval=60s
$ sudo pcs constraint location my-ipmilan-for-controller-1 avoids overcloud-controller-1
For Controller node 2:
sudo pcs stonith create my-ipmilan-for-controller-2 fence_ipmilan pcmk_host_list=overcloud-controller-2 ipaddr=192.0.2.207 login=admin passwd=p@55w0rd! lanplus=1 cipher=1 op monitor interval=60s sudo pcs constraint location my-ipmilan-for-controller-2 avoids overcloud-controller-2
$ sudo pcs stonith create my-ipmilan-for-controller-2 fence_ipmilan pcmk_host_list=overcloud-controller-2 ipaddr=192.0.2.207 login=admin passwd=p@55w0rd! lanplus=1 cipher=1 op monitor interval=60s
$ sudo pcs constraint location my-ipmilan-for-controller-2 avoids overcloud-controller-2
Run the following command to see all stonith resources:
sudo pcs stonith show
$ sudo pcs stonith show
Run the following command to see a specific stonith resource:
sudo pcs stonith show [stonith-name]
$ sudo pcs stonith show [stonith-name]
Finally, enable fencing by setting the
stonith property to true:
sudo pcs property set stonith-enabled=true
$ sudo pcs property set stonith-enabled=true
Verify the property:
sudo pcs property show
$ sudo pcs property show
'%20d='M201.5%20305.5c-13.8%200-24.9-11.1-24.9-24.6%200-13.8%2011.1-24.9%2024.9-24.9%2013.6%200%2024.6%2011.1%2024.6%2024.9%200%2013.6-11.1%2024.6-24.6%2024.6zM504%20256c0%20137-111%20248-248%20248S8%20393%208%20256%20119%208%20256%208s248%20111%20248%20248zm-132.3-41.2c-9.4%200-17.7%203.9-23.8%2010-22.4-15.5-52.6-25.5-86.1-26.6l17.4-78.3%2055.4%2012.5c0%2013.6%2011.1%2024.6%2024.6%2024.6%2013.8%200%2024.9-11.3%2024.9-24.9s-11.1-24.9-24.9-24.9c-9.7%200-18%205.8-22.1%2013.8l-61.2-13.6c-3-.8-6.1%201.4-6.9%204.4l-19.1%2086.4c-33.2%201.4-63.1%2011.3-85.5%2026.8-6.1-6.4-14.7-10.2-24.1-10.2-34.9%200-46.3%2046.9-14.4%2062.8-1.1%205-1.7%2010.2-1.7%2015.5%200%2052.6%2059.2%2095.2%20132%2095.2%2073.1%200%20132.3-42.6%20132.3-95.2%200-5.3-.6-10.8-1.9-15.8%2031.3-16%2019.8-62.5-14.9-62.5zM302.8%20331c-18.2%2018.2-76.1%2017.9-93.6%200-2.2-2.2-6.1-2.2-8.3%200-2.5%202.5-2.5%206.4%200%208.6%2022.8%2022.8%2087.3%2022.8%20110.2%200%202.5-2.2%202.5-6.1%200-8.6-2.2-2.2-6.1-2.2-8.3%200zm7.7-75c-13.6%200-24.6%2011.1-24.6%2024.9%200%2013.6%2011.1%2024.6%2024.6%2024.6%2013.8%200%2024.9-11.1%2024.9-24.6%200-13.8-11-24.9-24.9-24.9z'/%3e%3c/svg%3e){kind=small}