Red Hat Summit Red Hat SummitSupportoConsoleSviluppatoriInizia una provaContatti

Questo contenuto non è disponibile nella lingua selezionata.

Chapter 16. Backing up and restoring Red Hat Quay managed by the Red Hat Quay Operator

Use the content within this section to back up and restore Red Hat Quay when managed by the Red Hat Quay Operator on OpenShift Container Platform.

16.1. Backing up Red Hat Quay
Copia collegamento

This procedure describes how to create a backup of Red Hat Quay deployed on OpenShift Container Platform using the Red Hat Quay Operator

Prerequisites

  • A healthy Red Hat Quay deployment on OpenShift Container Platform using the Red Hat Quay Operator (status condition Available is set to true)
  • The components quay, postgres and objectstorage are set to managed: true
  • If the component clair is set to managed: true the component clairpostgres is also set to managed: true (starting with Red Hat Quay Operator v3.7 or later)
Note

If your deployment contains partially unmanaged database or storage components and you are using external services for Postgres or S3-compatible object storage to run your Red Hat Quay deployment, you must refer to the service provider or vendor documentation to create a backup of the data. You can refer to the tools described in this guide as a starting point on how to backup your external Postgres database or object storage.

16.1.1. Red Hat Quay configuration backup
Copia collegamento

  1. Backup the QuayRegistry custom resource by exporting it: 

    $ oc get quayregistry <quay-registry-name> -n <quay-namespace> -o yaml > quay-registry.yaml

  2. Edit the resulting quayregistry.yaml and remove the status section and the following metadata fields: 

      metadata.creationTimestamp
  metadata.finalizers
  metadata.generation
  metadata.resourceVersion
  metadata.uid

  3. Backup the managed keys secret:

    Note

    If you are running a version older than Red Hat Quay 3.7.0, this step can be skipped. Some secrets are automatically generated while deploying Quay for the first time. These are stored in a secret called <quay-registry-name>-quay-registry-managed-secret-keys in the namespace of the QuayRegistry resource. 

    $ oc get secret -n <quay-namespace> <quay-registry-name>-quay-registry-managed-secret-keys -o yaml > managed-secret-keys.yaml

  4. Edit the the resulting managed-secret-keys.yaml file and remove the entry metadata.ownerReferences. Your managed-secret-keys.yaml file should look similar to the following: 

    apiVersion: v1
kind: Secret
type: Opaque
metadata:
  name: <quayname>-quay-registry-managed-secret-keys
  namespace: <quay-namespace>
data:
  CONFIG_EDITOR_PW: <redacted>
  DATABASE_SECRET_KEY: <redacted>
  DB_ROOT_PW: <redacted>
  DB_URI: <redacted>
  SECRET_KEY: <redacted>
  SECURITY_SCANNER_V4_PSK: <redacted>

    All information under the data property should remain the same.

  5. Backup the current Quay configuration: 

    $ oc get secret -n <quay-namespace>  $(oc get quayregistry <quay-registry-name> -n <quay-namespace>  -o jsonpath='{.spec.configBundleSecret}') -o yaml > config-bundle.yaml

  6. Backup the /conf/stack/config.yaml file mounted inside of the Quay pods: 

    $ oc exec -it quay-pod-name -- cat /conf/stack/config.yaml > quay-config.yaml

16.1.2. Scale down your Red Hat Quay deployment
Copia collegamento

Important

This step is needed to create a consistent backup of the state of your Red Hat Quay deployment. Do not omit this step, including in setups where Postgres databases and/or S3-compatible object storage are provided by external services (unmanaged by the Operator).

  1. For Operator version 3.7 and newer: Scale down the Red Hat Quay deployment by disabling auto scaling and overriding the replica count for Red Hat Quay, mirror workers, and Clair (if managed). Your QuayRegistry resource should look similar to the following: 

    apiVersion: quay.redhat.com/v1
kind: QuayRegistry
metadata:
  name: registry
  namespace: ns
spec:
  components:
    …
    - kind: horizontalpodautoscaler
      managed: false
    1 
    
    - kind: quay
      managed: true
      overrides:
    2 
    
        replicas: 0
    - kind: clair
      managed: true
      overrides:
        replicas: 0
    - kind: mirror
      managed: true
      overrides:
        replicas: 0
    …
    1
    Disable auto scaling of Quay, Clair and Mirroring workers
    2
    Set the replica count to 0 for components accessing the database and objectstorage

  2. For Operator version 3.6 and earlier: Scale down the Red Hat Quay deployment by scaling down the Red Hat Quay Operator first and then the managed Red Hat Quay resources: 

    $ oc scale --replicas=0 deployment $(oc get deployment -n <quay-operator-namespace>|awk '/^quay-operator/ {print $1}') -n <quay-operator-namespace>
$ oc scale --replicas=0 deployment $(oc get deployment -n <quay-namespace>|awk '/quay-app/ {print $1}') -n <quay-namespace>
$ oc scale --replicas=0 deployment $(oc get deployment -n <quay-namespace>|awk '/quay-mirror/ {print $1}') -n <quay-namespace>
$ oc scale --replicas=0 deployment $(oc get deployment -n <quay-namespace>|awk '/clair-app/ {print $1}') -n <quay-namespace>

  3. Wait for the registry-quay-app, registry-quay-mirror and registry-clair-app pods (depending on which components you set to be managed by the Red Hat Quay Operator) to disappear. You can check their status by running the following command: 

    $ oc get pods -n <quay-namespace>

    Example output: 

    $ oc get pod

quay-operator.v3.7.1-6f9d859bd-p5ftc               1/1     Running     0             12m
quayregistry-clair-postgres-7487f5bd86-xnxpr       1/1     Running     1 (12m ago)   12m
quayregistry-quay-app-upgrade-xq2v6                0/1     Completed   0             12m
quayregistry-quay-config-editor-6dfdcfc44f-hlvwm   1/1     Running     0             73s
quayregistry-quay-database-859d5445ff-cqthr        1/1     Running     0             12m
quayregistry-quay-redis-84f888776f-hhgms           1/1     Running     0             12m

16.1.3. Red Hat Quay managed database backup
Copia collegamento

Note

If your Red Hat Quay deployment is configured with external (unmanged) Postgres database(s), refer to your vendor’s documentation on how to create a consistent backup of these databases.

  1. Identify the Quay PostgreSQL pod name: 

    $ oc get pod -l quay-component=postgres -n <quay-namespace> -o jsonpath='{.items[0].metadata.name}'

    Example output: 

    quayregistry-quay-database-59f54bb7-58xs7

  2. Obtain the Quay database name: 

    $ oc -n <quay-namespace> rsh $(oc get pod -l app=quay -o NAME -n <quay-namespace> |head -n 1) cat /conf/stack/config.yaml|awk -F"/" '/^DB_URI/ {print $4}'
quayregistry-quay-database

  3. Download a backup database: 

    $ oc exec quayregistry-quay-database-59f54bb7-58xs7 -- /usr/bin/pg_dump -C quayregistry-quay-database  > backup.sql

16.1.3.1. Red Hat Quay managed object storage backup
Copia collegamento

The instructions in this section apply to the following configurations:

  • Standalone, multi-cloud object gateway configurations
  • OpenShift Data Foundations storage requires that the Red Hat Quay Operator provisioned an S3 object storage bucket from, through the ObjectStorageBucketClaim API
Note

If your Red Hat Quay deployment is configured with external (unmanged) object storage, refer to your vendor’s documentation on how to create a copy of the content of Quay’s storage bucket.

  1. Decode and export the AWS_ACCESS_KEY_ID: 

    $ export AWS_ACCESS_KEY_ID=$(oc get secret -l app=noobaa -n <quay-namespace>  -o jsonpath='{.items[0].data.AWS_ACCESS_KEY_ID}' |base64 -d)

  2. Decode and export the AWS_SECRET_ACCESS_KEY_ID: 

    $ export AWS_SECRET_ACCESS_KEY=$(oc get secret -l app=noobaa -n <quay-namespace> -o jsonpath='{.items[0].data.AWS_SECRET_ACCESS_KEY}' |base64 -d)

  3. Create a new directory and copy all blobs to it: 

    $ mkdir blobs

$ aws s3 sync --no-verify-ssl --endpoint https://$(oc get route s3 -n openshift-storage  -o jsonpath='{.spec.host}')  s3://$(oc get cm -l app=noobaa -n <quay-namespace> -o jsonpath='{.items[0].data.BUCKET_NAME}') ./blobs
Note

You can also use rclone or sc3md instead of the AWS command line utility.

16.1.4. Scale the Red Hat Quay deployment back up
Copia collegamento

  1. For Operator version 3.7 and newer: Scale up the Red Hat Quay deployment by re-enabling auto scaling, if desired, and removing the replica overrides for Quay, mirror workers and Clair as applicable. Your QuayRegistry resource should look similar to the following: 

    apiVersion: quay.redhat.com/v1
kind: QuayRegistry
metadata:
  name: registry
  namespace: ns
spec:
  components:
    …
    - kind: horizontalpodautoscaler
      managed: true
    1 
    
    - kind: quay
    2 
    
      managed: true
    - kind: clair
      managed: true
    - kind: mirror
      managed: true
    …
    1
    Re-enables auto scaling of Quay, Clair and Mirroring workers again (if desired)
    2
    Replica overrides are removed again to scale the Quay components back up

  2. For Operator version 3.6 and earlier: Scale up the Red Hat Quay deployment by scaling up the Red Hat Quay Operator again: 

    $ oc scale --replicas=1 deployment $(oc get deployment -n <quay-operator-namespace> | awk '/^quay-operator/ {print $1}') -n <quay-operator-namespace>

  3. Check the status of the Red Hat Quay deployment: 

    $ oc wait quayregistry registry --for=condition=Available=true -n <quay-namespace>

    Example output: 

    apiVersion: quay.redhat.com/v1
kind: QuayRegistry
metadata:
  ...
  name: registry
  namespace: <quay-namespace>
  ...
spec:
  ...
status:
  - lastTransitionTime: '2022-06-20T05:31:17Z'
    lastUpdateTime: '2022-06-20T17:31:13Z'
    message: All components reporting as healthy
    reason: HealthChecksPassing
    status: 'True'
    type: Available

16.2. Restoring Red Hat Quay
Copia collegamento

This procedure is used to restore Red Hat Quay when the Red Hat Quay Operator manages the database. It should be performed after a backup of your Red Hat Quay registry has been performed. See Backing up Red Hat Quay for more information.

Prerequisites

  • Red Hat Quay is deployed on OpenShift Container Platform using the Red Hat Quay Operator.
  • A backup of the Red Hat Quay configuration managed by the Red Hat Quay Operator has been created following the instructions in the Backing up Red Hat Quay section
  • Your Red Hat Quay database has been backed up.
  • The object storage bucket used by Red Hat Quay has been backed up.
  • The components quay, postgres and objectstorage are set to managed: true
  • If the component clair is set to managed: true, the component clairpostgres is also set to managed: true (starting with Red Hat Quay Operator v3.7 or later)
  • There is no running Red Hat Quay deployment managed by the Red Hat Quay Operator in the target namespace on your OpenShift Container Platform cluster
Note

If your deployment contains partially unmanaged database or storage components and you are using external services for Postgres or S3-compatible object storage to run your Red Hat Quay deployment, you must refer to the service provider or vendor documentation to restore their data from a backup prior to restore Red Hat Quay

16.2.1. Restoring Red Hat Quay and its configuration from a backup
Copia collegamento

Note

These instructions assume you have followed the process in the Backing up Red Hat Quay guide and create the backup files with the same names.

  1. Restore the backed up Red Hat Quay configuration and the generated keys from the backup: 

    $ oc create -f ./config-bundle.yaml

$ oc create -f ./managed-secret-keys.yaml
    Important

    If you receive the error Error from server (AlreadyExists): error when creating "./config-bundle.yaml": secrets "config-bundle-secret" already exists, you must delete your existing resource with $ oc delete Secret config-bundle-secret -n <quay-namespace> and recreate it with $ oc create -f ./config-bundle.yaml.

  2. Restore the QuayRegistry custom resource: 

    $ oc create -f ./quay-registry.yaml

  3. Check the status of the Red Hat Quay deployment and wait for it to be available: 

    $ oc wait quayregistry registry --for=condition=Available=true -n <quay-namespace>

16.2.2. Scale down your Red Hat Quay deployment
Copia collegamento

  1. For Operator version 3.7 and newer: Scale down the Red Hat Quay deployment by disabling auto scaling and overriding the replica count for Quay, mirror workers and Clair (if managed). Your QuayRegistry resource should look similar to the following: 

    apiVersion: quay.redhat.com/v1
kind: QuayRegistry
metadata:
  name: registry
  namespace: ns
spec:
  components:
    …
    - kind: horizontalpodautoscaler
      managed: false
    1 
    
    - kind: quay
      managed: true
      overrides:
    2 
    
        replicas: 0
    - kind: clair
      managed: true
      overrides:
        replicas: 0
    - kind: mirror
      managed: true
      overrides:
        replicas: 0
    …
    1
    Disable auto scaling of Quay, Clair and Mirroring workers
    2
    Set the replica count to 0 for components accessing the database and objectstorage

  2. For Operator version 3.6 and earlier: Scale down the Red Hat Quay deployment by scaling down the Red Hat Quay Operator first and then the managed Red Hat Quay resources: 

    $ oc scale --replicas=0 deployment $(oc get deployment -n <quay-operator-namespace>|awk '/^quay-operator/ {print $1}') -n <quay-operator-namespace>

$ oc scale --replicas=0 deployment $(oc get deployment -n <quay-namespace>|awk '/quay-app/ {print $1}') -n <quay-namespace>
$ oc scale --replicas=0 deployment $(oc get deployment -n <quay-namespace>|awk '/quay-mirror/ {print $1}') -n <quay-namespace>
$ oc scale --replicas=0 deployment $(oc get deployment -n <quay-namespace>|awk '/clair-app/ {print $1}') -n <quay-namespace>

  3. Wait for the registry-quay-app, registry-quay-mirror and registry-clair-app pods (depending on which components you set to be managed by Operator) to disappear. You can check their status by running the following command: 

    $ oc get pods -n <quay-namespace>

    Example output: 

    registry-quay-config-editor-77847fc4f5-nsbbv   1/1     Running            0          9m1s
registry-quay-database-66969cd859-n2ssm        1/1     Running            0          6d1h
registry-quay-redis-7cc5f6c977-956g8           1/1     Running            0          5d21h

16.2.3. Restore your Red Hat Quay database
Copia collegamento

  1. Identify your Quay database pod: 

    $ oc get pod -l quay-component=postgres -n  <quay-namespace> -o jsonpath='{.items[0].metadata.name}'

    Example output: 

    quayregistry-quay-database-59f54bb7-58xs7

  2. Upload the backup by copying it from the local environment and into the pod: 

    $ oc cp ./backup.sql -n <quay-namespace> registry-quay-database-66969cd859-n2ssm:/tmp/backup.sql

  3. Open a remote terminal to the database: 

    $ oc rsh -n <quay-namespace> registry-quay-database-66969cd859-n2ssm

  4. Enter psql: 

    bash-4.4$ psql

  5. You can list the database by running the following command: 

    postgres=# \l

    Example output: 

                                                      List of databases
           Name            |           Owner            | Encoding |  Collate   |   Ctype    |   Access privileges
----------------------------+----------------------------+----------+------------+------------+-----------------------
postgres                   | postgres                   | UTF8     | en_US.utf8 | en_US.utf8 |
quayregistry-quay-database | quayregistry-quay-database | UTF8     | en_US.utf8 | en_US.utf8 |

  6. Drop the database: 

    postgres=# DROP DATABASE "quayregistry-quay-database";

    Example output: 

    DROP DATABASE

  7. Exit the postgres CLI to re-enter bash-4.4: 

    \q

  8. Redirect your PostgreSQL database to your backup database: 

    sh-4.4$ psql < /tmp/backup.sql

  9. Exit bash: 

    sh-4.4$ exit

16.2.4. Restore your Red Hat Quay object storage data
Copia collegamento

  1. Export the AWS_ACCESS_KEY_ID: 

    $ export AWS_ACCESS_KEY_ID=$(oc get secret -l app=noobaa -n <quay-namespace>  -o jsonpath='{.items[0].data.AWS_ACCESS_KEY_ID}' |base64 -d)

  2. Export the AWS_SECRET_ACCESS_KEY: 

    $ export AWS_SECRET_ACCESS_KEY=$(oc get secret -l app=noobaa -n <quay-namespace> -o jsonpath='{.items[0].data.AWS_SECRET_ACCESS_KEY}' |base64 -d)

  3. Upload all blobs to the bucket by running the following command: 

    $ aws s3 sync --no-verify-ssl --endpoint https://$(oc get route s3 -n openshift-storage  -o jsonpath='{.spec.host}') ./blobs  s3://$(oc get cm -l app=noobaa -n <quay-namespace> -o jsonpath='{.items[0].data.BUCKET_NAME}')
Note

You can also use rclone or sc3md instead of the AWS command line utility.

16.2.5. Scale up your Red Hat Quay deployment
Copia collegamento

  1. For Operator version 3.7 and newer: Scale up the Red Hat Quay deployment by re-enabling auto scaling, if desired, and removing the replica overrides for Quay, mirror workers and Clair as applicable. Your QuayRegistry resource should look similar to the following: 

    apiVersion: quay.redhat.com/v1
kind: QuayRegistry
metadata:
  name: registry
  namespace: ns
spec:
  components:
    …
    - kind: horizontalpodautoscaler
      managed: true
    1 
    
    - kind: quay
    2 
    
      managed: true
    - kind: clair
      managed: true
    - kind: mirror
      managed: true
    …
    1
    Re-enables auto scaling of Red Hat Quay, Clair and mirroring workers again (if desired)
    2
    Replica overrides are removed again to scale the Red Hat Quay components back up

  2. For Operator version 3.6 and earlier: Scale up the Red Hat Quay deployment by scaling up the Red Hat Quay Operator again: 

    $ oc scale --replicas=1 deployment $(oc get deployment -n <quay-operator-namespace> | awk '/^quay-operator/ {print $1}') -n <quay-operator-namespace>

  3. Check the status of the Red Hat Quay deployment: 

    $ oc wait quayregistry registry --for=condition=Available=true -n <quay-namespace>

    Example output: 

    apiVersion: quay.redhat.com/v1
kind: QuayRegistry
metadata:
  ...
  name: registry
  namespace: <quay-namespace>
  ...
spec:
  ...
status:
  - lastTransitionTime: '2022-06-20T05:31:17Z'
    lastUpdateTime: '2022-06-20T17:31:13Z'
    message: All components reporting as healthy
    reason: HealthChecksPassing
    status: 'True'
    type: Available
Red Hat logoGithubredditYoutubeTwitter

Formazione

Prova, acquista e vendi

Community

Informazioni sulla documentazione di Red Hat

Aiutiamo gli utenti Red Hat a innovarsi e raggiungere i propri obiettivi con i nostri prodotti e servizi grazie a contenuti di cui possono fidarsi. Esplora i nostri ultimi aggiornamenti.

Rendiamo l’open source più inclusivo

Red Hat si impegna a sostituire il linguaggio problematico nel codice, nella documentazione e nelle proprietà web. Per maggiori dettagli, visita il Blog di Red Hat.

Informazioni su Red Hat

Forniamo soluzioni consolidate che rendono più semplice per le aziende lavorare su piattaforme e ambienti diversi, dal datacenter centrale all'edge della rete.

Theme

© 2026 Red HatTorna in cima