Red Hat SummitQuesto contenuto non è disponibile nella lingua selezionata.
Chapter 19. Linking sites on local systems using YAML
Using a link resource YAML file allows you to create links between sites. The link direction is not significant, and is typically determined by ease of connectivity. For example, if east is behind a firewall, linking from east to west is the easiest option.
Once sites are linked, services can be exposed and consumed across the application network without the need to open ports or manage inter-site connectivity.
The procedures below describe linking an existing site. Typically, it is easier to configure a site, links and services in a set of files and then create a configured site by placing all the YAML files in a directory, for example local and then using the following command to
19.1. Linking sites using a link resource
An alternative approach to linking sites using tokens is to create a link resource YAML file using the CLI, and to apply that resource to another site.
Prerequisites
- A local system site
-
A Kubernetes site with
enable-link-accessenabled.
To link sites, you create a link resource YAML file on one site and apply that resource on the other site to create the link.
Procedure
On the site where you want to create a link , make sure link access is enabled:
skupper site update --enable-link-access
skupper site update --enable-link-accessCopy to Clipboard Copied! Toggle word wrap Toggle overflow Create a
linkresource YAML file:skupper link generate > <filename>
skupper link generate > <filename>Copy to Clipboard Copied! Toggle word wrap Toggle overflow where
<filename>is the name of a YAML file that is saved on your local filesystem.Apply the
linkresource YAML file on a local system site to create a link:mv <filename> ~/.local/share/skupper/namespaces/default/input/resources/ skupper system setup --force
mv <filename> ~/.local/share/skupper/namespaces/default/input/resources/ skupper system setup --forceCopy to Clipboard Copied! Toggle word wrap Toggle overflow where
<filename>is the name of a YAML file that is saved on your local filesystem.The path shown is specific to the
defaultnamespace. If you are configuring a different namespace, use that name instead.The site is recreated and you see some of the internal resources that are not affected, for example:
Copy to Clipboard Copied! Toggle word wrap Toggle overflow Check the status of the link:
skupper link status
skupper link statusCopy to Clipboard Copied! Toggle word wrap Toggle overflow The output shows the link name:
skupper link status
$ skupper link status NAME STATUS link-west OkCopy to Clipboard Copied! Toggle word wrap Toggle overflow You can now expose services on the application network.
'%20d='M201.5%20305.5c-13.8%200-24.9-11.1-24.9-24.6%200-13.8%2011.1-24.9%2024.9-24.9%2013.6%200%2024.6%2011.1%2024.6%2024.9%200%2013.6-11.1%2024.6-24.6%2024.6zM504%20256c0%20137-111%20248-248%20248S8%20393%208%20256%20119%208%20256%208s248%20111%20248%20248zm-132.3-41.2c-9.4%200-17.7%203.9-23.8%2010-22.4-15.5-52.6-25.5-86.1-26.6l17.4-78.3%2055.4%2012.5c0%2013.6%2011.1%2024.6%2024.6%2024.6%2013.8%200%2024.9-11.3%2024.9-24.9s-11.1-24.9-24.9-24.9c-9.7%200-18%205.8-22.1%2013.8l-61.2-13.6c-3-.8-6.1%201.4-6.9%204.4l-19.1%2086.4c-33.2%201.4-63.1%2011.3-85.5%2026.8-6.1-6.4-14.7-10.2-24.1-10.2-34.9%200-46.3%2046.9-14.4%2062.8-1.1%205-1.7%2010.2-1.7%2015.5%200%2052.6%2059.2%2095.2%20132%2095.2%2073.1%200%20132.3-42.6%20132.3-95.2%200-5.3-.6-10.8-1.9-15.8%2031.3-16%2019.8-62.5-14.9-62.5zM302.8%20331c-18.2%2018.2-76.1%2017.9-93.6%200-2.2-2.2-6.1-2.2-8.3%200-2.5%202.5-2.5%206.4%200%208.6%2022.8%2022.8%2087.3%2022.8%20110.2%200%202.5-2.2%202.5-6.1%200-8.6-2.2-2.2-6.1-2.2-8.3%200zm7.7-75c-13.6%200-24.6%2011.1-24.6%2024.9%200%2013.6%2011.1%2024.6%2024.6%2024.6%2013.8%200%2024.9-11.1%2024.9-24.6%200-13.8-11-24.9-24.9-24.9z'/%3e%3c/svg%3e){kind=small}