検索

このコンテンツは選択した言語では利用できません。

8.2. anaconda

download PDF
Updated anaconda packages that fix several bugs and add various enhancements are now available for Red Hat Enterprise Linux 6.

Bug Fixes

BZ#818233
Previously, anaconda did not recognize a DVD ISO image written to a USB drive as a source repository for installation because this device does not have partitions. Consequently, the ISO acted like a boot.iso and it was not possible to install packages included in it. With this update, anaconda has been modified to include devices with ISO 9660 formatting, and to configure any device as a source repository if this device contains the /repodata/repomd.xml file. As a result, anaconda now recognizes ISO on USB as expected.
BZ#845572
Prior to this update, the anaconda loader command created the /etc/sysconfig/network file by renaming a new temporary file, which did not trigger the NetworkManager's inotify mechanism. Consequently, a hostname set by the network --hostname kickstart option could be overridden by NetworkManager with hostname obtained though DHCP or DNS. With this update, loader has been modified to write new values directly into /etc/sysconfig/network. As a result, NetworkManager now accepts the hostname value specified in this file.
BZ#846336
Previously, anaconda did not attempt to use another loop device if the firstly selected one was already in use. Consequently, HDD ISO installation failed if loop devices were used in the kickstart %pre section. With this update, anaconda has been modified to use another loop device if the first one is already in use. As a result, HDD ISO installation works as expected.
BZ#847600
With this update, the list-harddrives command has been modified not to list the /dev/srX devices in its output.
BZ#851284
With this update, several typographical errors have been corrected in the About LVM dialog.
BZ#852523
When a different set of disks was used for the clearpart --drives and part --ondisk commands, a backtrace was returned. Consequently, installation did not finish successfully. With this update, only one set of disks is used with these commands. User must specify multiple disks with a single clearpart command, otherwise only the last clearpart --drives arguments is used.
BZ#859420
Prior to this update, when partitioning was incorrectly specified, the No free space error message was incorrectly shown instead of the appropriate No free slots dialog. With this update, the correct error message is displayed in case of incorrectly specified partitioning.
BZ#859569
Previously, anaconda in rescue mode unmounted the source ISO before searching for the .discinfo file. Consequently, the stage2 parameter was loaded twice, increasing the boot time. With this update, anaconda has been modified to skip the check for .discinfo in rescue mode. As a result, stage2 is only loaded once, as expected.
BZ#873281
Previously, when re-installing the system with already configured LVM raid1 volumes, anaconda terminated unexpectedly. This bug has been fixed, and anaconda no longer crashes in the aforementioned scenario.
BZ#875644
When a kickstart upgrade was performed on IBM System z architectures, anaconda shut down the system instead of rebooting even though the reboot command was present in the kickstart configuration. Consequently, a manual reboot was required. This update adds support for kickstart upgrades on System z, thus fixing this bug.
BZ#877852
Previously, when installing Red Hat Enterprise Linux 6 on a system with multiple disks and one or more of these disks contained the PPC PReP Boot partition, anaconda created an empty PPC PReP Boot partition on the selected installation disk, but stored necessary boot files in the already existing PPC PReP Boot. Consequently, the system failed to boot after the installation. With this update, anaconda has been modified to use the correct PPC PReP Boot for boot files, thus fixing this bug.
BZ#878907
The algorithm for calculating the swap size did not take into account the amount of space used for the installation. Consequently, even on small disks the installer created big swap space often leaving only insufficient amount of space for the rest of the system. This algorithm has been modified to register the amount of space used for the installation. As a result, smaller (10% of used disks' space) swap is created on machines with small disks leaving more space for the rest of the system.
BZ#880577
Previously, anaconda did not create partitions larger than 16TB on XFS filesystems. This bug has been fixed, and the official limit of 100TB is now used as accepted.
BZ#881005
Prior to this update, the autopart command did not function correctly with already defined prepboot partitions. Consequently, when using a kickstart file that contained the part command defining a prepboot partition followed by autopart, anaconda terminated unexpectedly with a segmentation fault. With this update, autopart has been modified to work correctly in the aforementioned configuration. As a result, the installation continues as expected.
BZ#882452
Previously, when configuring network devices within the anaconda GUI, devices using the FCoE network technology were automatically set not to be controlled by the NetworkManager. Consequently, NetworkManager disabled these devices, causing previously connected FCoE SAN disks to disappear from the GUI. This bug has been fixed, and editing network device configuration in the GUI no longer disconnects previously set FCoE devices.
BZ#886020
Previously, anaconda did not return a warning message when using a raw partition for the / mount point without creating a new file system. With this update, anaconda has been modified to display a warning message in such scenario.
BZ#888292
Under certain circumstances, when managing partitions with the anaconda GUI, an unexpected loss of window focus occurred. With this update, the parent window setting has been modified, thus fixing this bug.
BZ#893849
With this update, several typographic and translation errors have been corrected in the Japanese locale in anaconda.
BZ#894050
Previously, anaconda created the /etc/zipl.conf configuration file using a set of default kernel parameters regardless of whether a fresh install or upgrade was performed. Consequently, kernel parameters added to /etc/zipl.conf by users were lost when upgrading IBM System z systems with anaconda. This update adds support for boot loader upgrades for systems with System z architecture. As a result, kernel parameters added by users to /etc/zipl.conf are preserved in the aforementioned scenario.
BZ#895098
Prior to this update, when attempting to install conflicting packages with the anaconda GUI, a misleading warning message was displayed. With this update, this message has been modified to inform about the package conflict.
BZ#895982
Physical-extents size less than 32MB on top of an MD physical volume leads anaconda to problems with calculating the capacity of a volume group. To work around this problem, use a physical-extent size of at least 32MB or leave free space (with size equal to doubled size of the physical-extent) when allocating logical volumes.
BZ#901515
Before proceeding to the package installation phase, anaconda did not check if the core package group was available in selected repositories. If this group was not present, the installation terminated unexpectedly. With this update, anaconda has been modified to check for the presence of core. As a result, a warning message is displayed when core is not available, and installation no longer crashes.
BZ#903689
Previously, when configuring a VLAN network device, such as eth0.171, during the installation, the same configuration was incorrectly applied also for its parent device. Consequently, the VLAN parent device, such as eth0, was incorrectly configured during the installation. The bug has been fixed, and the VLAN device configuration is now applied correctly.
BZ#909463
Under certain circumstances, kernel command-line entries created by anaconda and passed to GRUB did not work correctly. Consequently, in multi-path configuration, the Boot File System (BFS) terminated unexpectedly when the last FCoE interface specified in kernel command was not on-line. With this update, the form of kernel command-line entries has been modified, and BFS no longer fails in the aforementioned scenario.
BZ#919409
Previously, the /etc/multipath/bindings file had incorrect SElinux context after installation. This bug has been fixed, and /etc/multipath/bindings is now installed with correct SElinux context.
BZ#921609
Prior to this update, the generated kickstart file did not contain correct network commands for VLAN interfaces. Consequently, these commands were not reusable during the installation. This bug has been fixed, and the generated kickstart now contains reusable network commands.
BZ#928144
By default, the AMD IOMMU driver is disabled in Red Hat Enterprise Linux 6 for stability reasons. However, when IOMMU is expected to be present for trusted boot, this driver is needed. With this update, anaconda has been modified to enable AMD IOMMU in the kernel boot parameters when the tboot package is installed. MD IOMMU is enabled when trusted boot is in use and AMD IOMMU specifications are present and enabled in the BIOS. To revert these settings, users may remove the "amd_iommu=on" kernel parameter if stability issues are encountered.
BZ#947704
Previously, it was not possible to blacklist the usb-storage module during the installation of Red Hat Enterprise Linux 6. This bug has been fixed, and usb-storage can now be blacklisted without complications.
BZ#949409
Under certain rare circumstances, the dasd_eckd_mod driver was not loaded during linuxrc.s390 installation and anaconda became unresponsive. With this update, a patch has been applied to prevent this problem.
BZ#971961
Previously, bond network devices were activated only in the early stage of installation. Consequently, bond devices configured by network commands in the stage2 file were not activated. This behavior has been changed and bond devices can now be activated also in later stages of installation.
BZ#994504
Previously, anaconda loaded certain required packages multiple times during installation. Consequently, the dependency solving took a long time, growing with number of disks and file systems. With this update, anaconda has been modified to use a more efficient way of selecting packages, thus reducing the time spent on dependency solving.
BZ#998486
With this update, anaconda no longer requires the fcoe-utils package for installation on the IBM System z architectures.
BZ#1003844
Prior to this update, anaconda limited swap size to 10 % of disk space even if --hibernation option was used in the kickstart file. With this update, anaconda has been modified to accept the --hibernation option, and swap size is no longer limited to 10% of disk space when this option is specified.
BZ#1004752
Due to an incorrect setting in the /etc/ssh/sshd_config.anaconda configuration file, the sshd daemon did not start during installation on IBM System z architectures in FIPS mode. Consequently, the installation was not successful. This bug has been fixed, and sshd now runs as expected during installation in FIPS mode.
BZ#1007641
Prior to this update, multipath devices were not listed during installation in VNC mode. This bug has been fixed, and these devices are now listed properly.
BZ#1007683
Devices directly formatted with a file system without any partitions are not supported in Red Hat Enterprise Linux 6. Previously, anaconda did not verify if devices meet this condition. Consequently, when attempting to create a new partition on such unsupported device, anaconda terminated unexpectedly. With this update, anaconda has been modified to check if the device is unpartitioned and to abort partitioning in such case, thus preventing the crash.
BZ#1007884
Previously, a bug in the zipl boot loader caused a runtime error in anaconda. Consequently, the IBM System z architectures with rootfs on iSCSI LUN failed to boot after ananaconda upgrade from Red Hat Enterprise Linux 6.4 to 6.5. This bug has been fixed, and the failed booting no longer occurs after system upgrade.
BZ#1008731
Due to an outdated FCoE detection for Broadcom adapters in anaconda, the system was unable to boot after OS after FCoE BFS installation on HP systems. With this update, anaconda has been modified to correctly detect FCoE on Broadcom adapters, and the boot problems no longer occur in the aforementioned scenario.
BZ#1008941
Under certain circumstances, after an upgrade from Red Hat Enterprise Linux 6.4 to 6.5, the IBM System z system did not boot from the correct storage device. This bug has been fixed, and System z systems now boot from the correct device after upgrade.
BZ#1009691
Certain adapters, such as 10GBaseT Twin Pond require longer time to link up. This time often exceeded the timeout limit of the fipvlan tool used by the installer. Consequently, adding FCoE targets in the GUI failed by timing out. With this update, the timeout limit of fipvlan has been raised. As a result, FCoE target is now added successfully regardless of adapter type. Nevertheless, to view the added device in the GUI, user has to go two screens back to the language selection and then forth.
BZ#1013176
Previously, the list of FCoE LUNs disappeared from the SAN Devices tab in anaconda after adding a second adapter during installation of the Specialized Storage BFS. This bug has been fixed, and the list is now displayed correctly during the installation.
BZ#1018703
Prior to this update, anaconda incorrectly extracted partition names for NVMe devices. Consequently, the boot loader installation failed on NVMe devices. This bug has been fixed, and NVMe devices are now installed successfully.

Enhancements

BZ#890095
This update adds more flexible support for disk references within the --driveorder option in the kickstart boot loader. It is now possible to specify disks that use the /dev/disk/by-*/ folders as arguments for --driveorder.
BZ#905227
This update adds the --ipv6gateway option to the kickstart network command, which allows to specify a default IPv6 gateway. Now, both IPv4 and IPv6 default gateways can be specified in network kickstart command using --gateway or --ipv6gateway respectively.
BZ#915666
With this update, a partition size check has been added to anaconda to ensure that the boot partition on x86 architectures is always less than 2TB, which is required by the GRUB boot loader.
BZ#917815
With this update, anaconda has been modified to allow the DDNS method in the installer. If a hostname is specified in the kickstart configuration of a network device that uses the DHCP protocol, this hostname is passed to the dhclient utility.
Users of anaconda are advised to upgrade to these updated packages, which fix these bugs and add these enhancements.
Red Hat logoGithubRedditYoutubeTwitter

詳細情報

試用、購入および販売

コミュニティー

Red Hat ドキュメントについて

Red Hat をお使いのお客様が、信頼できるコンテンツが含まれている製品やサービスを活用することで、イノベーションを行い、目標を達成できるようにします。

多様性を受け入れるオープンソースの強化

Red Hat では、コード、ドキュメント、Web プロパティーにおける配慮に欠ける用語の置き換えに取り組んでいます。このような変更は、段階的に実施される予定です。詳細情報: Red Hat ブログ.

会社概要

Red Hat は、企業がコアとなるデータセンターからネットワークエッジに至るまで、各種プラットフォームや環境全体で作業を簡素化できるように、強化されたソリューションを提供しています。

© 2024 Red Hat, Inc.