このコンテンツは選択した言語では利用できません。
Chapter 70. Jetty
Jetty Component
The jetty component provides HTTP-based endpoints for consuming and producing HTTP requests. That is, the Jetty component behaves as a simple Web server. Jetty can also be used as a http client which mean you can also use it with Camel as a producer.
Stream
Jetty is stream based, which means the input it receives is submitted to Camel as a stream. That means you will only be able to read the content of the stream once. If you find a situation where the message body appears to be empty or you need to access the
Exchange.HTTP_RESPONSE_CODE
data multiple times (eg: doing multicasting, or redelivery error handling) you should use Stream Caching or convert the message body to a String
which is safe to be re-read multiple times.
Maven users will need to add the following dependency to their
pom.xml
for this component:
<dependency> <groupId>org.apache.camel</groupId> <artifactId>camel-jetty</artifactId> <version>x.x.x</version> <!-- use the same version as your Camel core version --> </dependency>
URI format
jetty:http://hostname[:port][/resourceUri][?options]
You can append query options to the URI in the following format,
?option=value&option=value&...
Options
Name | Default Value | Description |
---|---|---|
sessionSupport
|
false
|
Specifies whether to enable the session manager on the server side of Jetty. |
httpClient.XXX
|
null
|
Configuration of Jetty's HttpClient. For example, setting httpClient.idleTimeout=30000 sets the idle timeout to 30 seconds.
|
httpClient
|
null
|
To use a shared org.eclipse.jetty.client.HttpClient for all producers created by this endpoint. This option should only be used in special circumstances.
|
httpClientMinThreads
|
null
|
Camel 2.11:Producer only: To set a value for minimum number of threads in HttpClient thread pool. This setting override any setting configured on component level. Notice that both a min and max size must be configured. If not set it default to min 8 threads used in Jetty's thread pool.
|
httpClientMaxThreads
|
null
|
Camel 2.11:Producer only: To set a value for maximum number of threads in HttpClient thread pool. This setting override any setting configured on component level. Notice that both a min and max size must be configured. If not set it default to min 8 threads used in Jetty's thread pool.
|
httpBindingRef
|
null
|
Reference to an org.apache.camel.component.http.HttpBinding in the Registry. HttpBinding can be used to customize how a response should be written for the consumer.
|
jettyHttpBindingRef
|
null
|
Camel 2.6.0+: Reference to an org.apache.camel.component.jetty.JettyHttpBinding in the Registry. JettyHttpBinding can be used to customize how a response should be written for the producer.
|
matchOnUriPrefix
|
false
|
Whether or not the CamelServlet should try to find a target consumer by matching the URI prefix if no exact match is found. See here How do I let Jetty match wildcards.
|
handlers
|
null
|
Specifies a comma-delimited set of org.mortbay.jetty.Handler instances in your Registry (such as your Spring ApplicationContext ). These handlers are added to the Jetty servlet context (for example, to add security).
|
chunked
|
true
|
Camel 2.2: If this option is false Jetty servlet will disable the HTTP streaming and set the content-length header on the response |
enableJmx
|
false
|
Camel 2.3: If this option is true, Jetty JMX support will be enabled for this endpoint. See Jetty JMX support for more details. |
disableStreamCache
|
false
|
Camel 2.3: Determines whether or not the raw input stream from Jetty is cached or not (Camel will read the stream into a in memory/overflow to file, Stream caching) cache. By default Camel will cache the Jetty input stream to support reading it multiple times to ensure it Camel can retrieve all data from the stream. However you can set this option to true when you for example need to access the raw stream, such as streaming it directly to a file or other persistent store. DefaultHttpBinding will copy the request input stream into a stream cache and put it into message body if this option is false to support reading the stream multiple times. If you use Jetty to bridge/proxy an endpoint then consider enabling this option to improve performance, in case you do not need to read the message payload multiple times.
|
throwExceptionOnFailure
|
true
|
Option to disable throwing the HttpOperationFailedException in case of failed responses from the remote server. This allows you to get all responses regardles of the HTTP status code.
|
transferException
|
false
|
Camel 2.6: If enabled and an Exchange failed processing on the consumer side, and if the caused Exception was send back serialized in the response as a application/x-java-serialized-object content type. On the producer side the exception will be deserialized and thrown as is, instead of the HttpOperationFailedException . The caused exception is required to be serialized.
|
bridgeEndpoint
|
false
|
>Camel 2.1: If the option is true , HttpProducer will ignore the Exchange.HTTP_URI header, and use the endpoint's URI for request. You may also set the throwExceptionOnFailure to be false to let the HttpProducer send all the fault response back. Camel 2.3: If the option is true, HttpProducer and CamelServlet will skip the gzip processing if the content-encoding is "gzip". Also consider setting disableStreamCache to true to optimize when bridging.
|
enableMultipartFilter
|
true
|
Camel 2.5: Whether Jetty org.eclipse.jetty.servlets.MultiPartFilter is enabled or not. You should set this value to false when bridging endpoints, to ensure multipart requests is proxied/bridged as well.
|
multipartFilterRef
|
null
|
Camel 2.6: Allows using a custom multipart filter. Note: setting multipartFilterRef forces the value of enableMultipartFilter to true .
|
FiltersRef
|
null
|
Camel 2.9: Allows using a custom filters which is putted into a list and can be find in the Registry |
continuationTimeout
|
null
|
Camel 2.6: Allows to set a timeout in millis when using Jetty as consumer (server). By default Jetty uses 30000. You can use a value of <= 0 to never expire. If a timeout occurs then the request will be expired and Jetty will return back a http error 503 to the client. This option is only in use when using Jetty with the Asynchronous Routing Engine.
|
useContinuation
|
true
|
Camel 2.6: Whether or not to use Jetty continuations for the Jetty Server. |
sslContextParametersRef
|
null
|
Camel 2.8: Reference to a org.apache.camel.util.jsse.SSLContextParameters in the CAMEL:Registry. This reference overrides any configured SSLContextParameters at the component level. See Using the JSSE Configuration Utility.
|
traceEnabled
|
false
|
Specifies whether to enable HTTP TRACE for this Jetty consumer. By default TRACE is turned off. |
headerFilterStrategy
|
null
|
Camel 2.11: Reference to a instance of org.apache.camel.spi.HeaderFilterStrategy in the Registry. It will be used to apply the custom headerFilterStrategy on the new create HttpJettyEndpoint.
|
httpMethodRestrict
|
null
|
Camel 2.11: Consumer only: Used to only allow consuming if the
HttpMethod matches, such as GET /POST /PUT etc. From Camel 2.15 onwards multiple methods can be specified separated by comma.
|
urlRewrite
|
null
|
Camel 2.11:Producer only Refers to a custom org.apache.camel.component.http.UrlRewrite which allows you to rewrite urls when you bridge/proxy endpoints. See more details at UrlRewrite and How to use Camel as a HTTP proxy between a client and server.
|
responseBufferSize
|
null
|
Camel 2.12: To use a custom buffer size on the javax.servlet.ServletResponse .
|
proxyHost
|
null
|
Camel 2.11: Producer only The http proxy Host url which will be used by Jetty client.
|
proxyPort
|
null
|
Camel 2.11: Producer only The http proxy port which will be used by Jetty client.
|
sendServerVersion
|
true
|
Camel 2.13: if the option is true, jetty will send the server header with the jetty version information to the client which sends the request. NOTE please make sure there is no any other camel-jetty endpoint is share the same port, otherwise this option may not work as expected.
|
sendDateHeader
|
false
|
Camel 2.14: if the option is true, jetty server will send the date header to the client which sends the request. NOTE please make sure there is no any other camel-jetty endpoint is share the same port, otherwise this option may not work as expected.
|
enableCORS
|
false
|
Camel 2.15: if the option is
true , Jetty server will set up the CrossOriginFilter which supports the CORS out of box.
|
Message Headers
Camel uses the same message headers as the HTTP component. From Camel 2.2, it also uses (Exchange.HTTP_CHUNKED,CamelHttpChunked) header to turn on or turn off the chuched encoding on the camel-jetty consumer.
Camel also populates all request.parameter and request.headers. For example, given a client request with the URL,
http://myserver/myserver?orderid=123
, the exchange will contain a header named orderid
with the value 123.
Starting with Camel 2.2.0, you can get the request.parameter from the message header not only from Get Method, but also other HTTP method.
Usage
The Jetty component supports both consumer and producer endpoints. Another option for producing to other HTTP endpoints, is to use the HTTP Component
Component Options
The
JettyHttpComponent
provides the following options:
Name | Default Value | Description |
---|---|---|
enableJmx
|
false
|
Camel 2.3: If this option is true, Jetty JMX support will be enabled for this endpoint. See Jetty JMX support for more details. |
sslKeyPassword
|
null
|
Consumer only: The password for the keystore when using SSL. |
sslPassword
|
null
|
Consumer only: The password when using SSL. |
sslKeystore
|
null
|
Consumer only: The path to the keystore. |
minThreads
|
null
|
Camel 2.5 Consumer only: To set a value for minimum number of threads in server thread pool. |
maxThreads
|
null
|
Camel 2.5 Consumer only: To set a value for maximum number of threads in server thread pool. |
threadPool
|
null
|
Camel 2.5 Consumer only: To use a custom thread pool for the server. |
sslSocketConnectors
|
null
|
Camel 2.3 Consumer only: A map which contains per port number specific SSL connectors. See section SSL support for more details. |
socketConnectors
|
null
|
Camel 2.5 Consumer only: A map which contains per port number specific HTTP connectors. Uses the same principle as sslSocketConnectors and therefore see section SSL support for more details.
|
sslSocketConnectorProperties
|
null
|
Camel 2.5 Consumer only. A map which contains general SSL connector properties. See section SSL support for more details. |
socketConnectorProperties
|
null
|
Camel 2.5 Consumer only. A map which contains general HTTP connector properties. Uses the same principle as sslSocketConnectorProperties and therefore see section SSL support for more details.
|
httpClient
|
null
|
Deprecated:Producer only: To use a custom HttpClient with the jetty producer. This option is removed from Camel 2.11 onwards, instead you can set the option on the endpoint instead.
|
httpClientMinThreads
|
null
|
Producer only: To set a value for minimum number of threads in HttpClient thread pool. Notice that both a min and max size must be configured.
|
httpClientMaxThreads
|
null
|
Producer only: To set a value for maximum number of threads in HttpClient thread pool. Notice that both a min and max size must be configured.
|
httpClientThreadPool
|
null
|
Deprecated:Producer only: To use a custom thread pool for the client. This option is removed from Camel 2.11 onwards. |
sslContextParameters
|
null
|
Camel 2.8: To configure a custom SSL/TLS configuration options at the component level. See Using the JSSE Configuration Utility for more details. |
requestBufferSize
|
null
|
Camel 2.11.2: Allows to configure a custom value of the request buffer size on the Jetty connectors. |
requestHeaderSize
|
null
|
Camel 2.11.2: Allows to configure a custom value of the request header size on the Jetty connectors. |
responseBufferSize
|
null
|
Camel 2.11.2: Allows to configure a custom value of the response buffer size on the Jetty connectors. |
responseHeaderSize
|
null
|
Camel 2.11.2: Allows to configure a custom value of the response header size on the Jetty connectors. |
proxyHost
|
null
|
Camel 2.12.2/2.11.3 To use a http proxy.
|
proxyPort
|
null
|
Camel 2.12.2/2.11.3: To use a http proxy.
|
errorHandler
|
null
|
Camel 2.15: This option is used to set the ErrorHandler that Jetty server uses.
|
Producer Example
The following is a basic example of how to send an HTTP request to an existing HTTP endpoint.
in Java DSL
from("direct:start").to("jetty://http://www.google.com");
or in Spring XML
<route> <from uri="direct:start"/> <to uri="jetty://http://www.google.com"/> <route>
Consumer Example
In this sample we define a route that exposes a HTTP service at
http://localhost:8080/myapp/myservice
:
from("jetty:http://localhost:{{port}}/myapp/myservice").process(new MyBookService());
Usage of localhost
When you specify
localhost
in a URL, Camel exposes the endpoint only on the local TCP/IP network interface, so it cannot be accessed from outside the machine it operates on.
If you need to expose a Jetty endpoint on a specific network interface, the numerical IP address of this interface should be used as the host. If you need to expose a Jetty endpoint on all network interfaces, the
0.0.0.0
address should be used.
Tip
To listen across an entire URI prefix, see How do I let Jetty match wildcards.
Tip
If you actually want to expose routes by HTTP and already have a Servlet, you should instead refer to the Servlet Transport.
Our business logic is implemented in the
MyBookService
class, which accesses the HTTP request contents and then returns a response. Note: The assert
call appears in this example, because the code is part of an unit test.
public class MyBookService implements Processor { public void process(Exchange exchange) throws Exception { // just get the body as a string String body = exchange.getIn().getBody(String.class); // we have access to the HttpServletRequest here and we can grab it if we need it HttpServletRequest req = exchange.getIn().getBody(HttpServletRequest.class); assertNotNull(req); // for unit testing assertEquals("bookid=123", body); // send a html response exchange.getOut().setBody("<html><body>Book 123 is Camel in Action</body></html>"); } }
The following sample shows a content-based route that routes all requests containing the URI parameter,
one
, to the endpoint, mock:one
, and all others to mock:other
.
from("jetty:" + serverUri) .choice() .when().simple("${header.one}").to("mock:one") .otherwise() .to("mock:other");
So if a client sends the HTTP request,
http://serverUri?one=hello
, the Jetty component will copy the HTTP request parameter, one
to the exchange's in.header
. We can then use the simple
language to route exchanges that contain this header to a specific endpoint and all others to another. If we used a language more powerful than Simple\-\--such as- El or OGNL\--we could also test for the parameter value and do routing based on the header value as well.
Session Support
The session support option,
sessionSupport
, can be used to enable a HttpSession
object and access the session object while processing the exchange. For example, the following route enables sessions:
<route> <from uri="jetty:http://0.0.0.0/myapp/myservice/?sessionSupport=true"/> <processRef ref="myCode"/> <route>
<bean id="myCode"class="com.mycompany.MyCodeProcessor"/>
Where the processor implementation can access the
HttpSession
as follows:
public void process(Exchange exchange) throws Exception { HttpSession session = exchange.getIn(HttpMessage.class).getRequest().getSession(); ... }
Using the JSSE Configuration Utility
As of Camel 2.8, the Jetty component supports SSL/TLS configuration through the Camel JSSE Configuration Utility. This utility greatly decreases the amount of component specific code you need to write and is configurable at the endpoint and component levels. The following examples demonstrate how to use the utility with the Jetty component.
Programmatic configuration of the component
KeyStoreParameters ksp = new KeyStoreParameters(); ksp.setResource("/users/home/server/keystore.jks"); ksp.setPassword("keystorePassword"); KeyManagersParameters kmp = new KeyManagersParameters(); kmp.setKeyStore(ksp); kmp.setKeyPassword("keyPassword"); SSLContextParameters scp = new SSLContextParameters(); scp.setKeyManagers(kmp); JettyComponent jettyComponent = getContext().getComponent("jetty", JettyComponent.class); jettyComponent.setSslContextParameters(scp);
Spring DSL based configuration of endpoint
... <camel:sslContextParameters id="sslContextParameters"> <camel:keyManagers keyPassword="keyPassword"> <camel:keyStore resource="/users/home/server/keystore.jks" password="keystorePassword"/> </camel:keyManagers> </camel:sslContextParameters>... ... <to uri="jetty:https://127.0.0.1/mail/?sslContextParametersRef=sslContextParameters"/> ...
Configuring Jetty Directly
Jetty provides SSL support out of the box. To enable Jetty to run in SSL mode, simply format the URI with the
https://
prefix---for example:
<from uri="jetty:https://0.0.0.0/myapp/myservice/"/>
Jetty also needs to know where to load your keystore from and what passwords to use in order to load the correct SSL certificate. Set the following JVM System Properties:
until Camel 2.2
jetty.ssl.keystore
specifies the location of the Java keystore file, which contains the Jetty server's own X.509 certificate in a key entry. A key entry stores the X.509 certificate (effectively, the public key) and also its associated private key.jetty.ssl.password
the store password, which is required to access the keystore file (this is the same password that is supplied to thekeystore
command's\-storepass
option).jetty.ssl.keypassword
the key password, which is used to access the certificate's key entry in the keystore (this is the same password that is supplied to thekeystore
command's\-keypass
option).
from Camel 2.3 onwards
org.eclipse.jetty.ssl.keystore
specifies the location of the Java keystore file, which contains the Jetty server's own X.509 certificate in a key entry. A key entry stores the X.509 certificate (effectively, the public key) and also its associated private key.org.eclipse.jetty.ssl.password
the store password, which is required to access the keystore file (this is the same password that is supplied to thekeystore
command's\-storepass
option).org.eclipse.jetty.ssl.keypassword
the key password, which is used to access the certificate's key entry in the keystore (this is the same password that is supplied to thekeystore
command's\-keypass
option).
For details of how to configure SSL on a Jetty endpoint, read the following documentation at the Jetty Site: http://docs.codehaus.org/display/JETTY/How+to+configure+SSL
Some SSL properties aren't exposed directly by Camel, however Camel does expose the underlying SslSocketConnector, which will allow you to set properties like needClientAuth for mutual authentication requiring a client certificate or wantClientAuth for mutual authentication where a client doesn't need a certificate but can have one. There's a slight difference between the various Camel versions:
Up to Camel 2.2
<bean id="jetty" class="org.apache.camel.component.jetty.JettyHttpComponent"> <property name="sslSocketConnectors"> <map> <entry key="8043"> <bean class="org.mortbay.jetty.security.SslSocketConnector"> <property name="password"value="..."/> <property name="keyPassword"value="..."/> <property name="keystore"value="..."/> <property name="needClientAuth"value="..."/> <property name="truststore"value="..."/> </bean> </entry> </map> </property> </bean>
Camel 2.3, 2.4
<bean id="jetty" class="org.apache.camel.component.jetty.JettyHttpComponent"> <property name="sslSocketConnectors"> <map> <entry key="8043"> <bean class="org.eclipse.jetty.server.ssl.SslSocketConnector"> <property name="password"value="..."/> <property name="keyPassword"value="..."/> <property name="keystore"value="..."/> <property name="needClientAuth"value="..."/> <property name="truststore"value="..."/> </bean> </entry> </map> </property> </bean>
\*From Camel 2.5 we switch to use SslSelectChannelConnector *
<bean id="jetty" class="org.apache.camel.component.jetty.JettyHttpComponent"> <property name="sslSocketConnectors"> <map> <entry key="8043"> <bean class="org.eclipse.jetty.server.ssl.SslSelectChannelConnector"> <property name="password"value="..."/> <property name="keyPassword"value="..."/> <property name="keystore"value="..."/> <property name="needClientAuth"value="..."/> <property name="truststore"value="..."/> </bean> </entry> </map> </property> </bean>
The value you use as keys in the above map is the port you configure Jetty to listen on.
Configuring general SSL properties
Available as of Camel 2.5
Instead of a per port number specific SSL socket connector (as shown above) you can now configure general properties which applies for all SSL socket connectors (which is not explicit configured as above with the port number as entry).
<bean id="jetty" class="org.apache.camel.component.jetty.JettyHttpComponent"> <property name="sslSocketConnectorProperties"> <map> <entry key="password"value="..."/> <entry key="keyPassword"value="..."/> <entry key="keystore"value="..."/> <entry key="needClientAuth"value="..."/> <entry key="truststore"value="..."/> </map> </property> </bean>
How to obtain reference to the X509Certificate
Jetty stores a reference to the certificate in the HttpServletRequest which you can access from code as follows:
HttpServletRequest req = exchange.getIn().getBody(HttpServletRequest.class); X509Certificate cert = (X509Certificate) req.getAttribute("javax.servlet.request.X509Certificate")
Configuring general HTTP properties
Available as of Camel 2.5
Instead of a per port number specific HTTP socket connector (as shown above) you can now configure general properties which applies for all HTTP socket connectors (which is not explicit configured as above with the port number as entry).
<bean id="jetty" class="org.apache.camel.component.jetty.JettyHttpComponent"> <property name="socketConnectorProperties"> <map> <entry key="acceptors" value="4"/> <entry key="maxIdleTime" value="300000"/> </map> </property> </bean>
Obtaining X-Forwarded-For header with HttpServletRequest.getRemoteAddr()
If the HTTP requests are handled by an Apache server and forwarded to Jetty with
mod_proxy
, the original client IP address is in the X-Forwarded-For
header and the HttpServletRequest.getRemoteAddr()
will return the address of the Apache proxy.
Jetty has a forwarded property which takes the value from
X-Forwarded-For
and places it in the HttpServletRequest
remoteAddr
property. This property is not available directly through the endpoint configuration but it can be easily added using the socketConnectors
property:
<bean id="jetty" class="org.apache.camel.component.jetty.JettyHttpComponent"> <property name="socketConnectors"> <map> <entry key="8080"> <bean class="org.eclipse.jetty.server.nio.SelectChannelConnector"> <property name="forwarded" value="true"/> </bean> </entry> </map> </property> </bean>
This is particularly useful when an existing Apache server handles TLS connections for a domain and proxies them to application servers internally.
Default behaviour for returning HTTP status codes
The default behavior of HTTP status codes is defined by the
org.apache.camel.component.http.DefaultHttpBinding
class, which handles how a response is written and also sets the HTTP status code.
If the exchange was processed successfully, the 200 HTTP status code is returned. If the exchange failed with an exception, the 500 HTTP status code is returned, and the stacktrace is returned in the body. If you want to specify which HTTP status code to return, set the code in the
Exchange.HTTP_RESPONSE_CODE
header of the OUT message.
Customizing HttpBinding
By default, Camel uses the
org.apache.camel.component.http.DefaultHttpBinding
to handle how a response is written. If you like, you can customize this behavior either by implementing your own HttpBinding
class or by extending DefaultHttpBinding
and overriding the appropriate methods.
The following example shows how to customize the
DefaultHttpBinding
in order to change how exceptions are returned:
public class MyHttpBinding extends DefaultHttpBinding { public MyHttpBinding(HttpEndpoint ep) { super(ep); } @Override public void doWriteExceptionResponse(Throwable exception, HttpServletResponse response) throws IOException { // we override the doWriteExceptionResponse as we only want to alter the binding how exceptions is // written back to the client. // we just return HTTP 200 so the client thinks its okay response.setStatus(200); // and we return this fixed text response.getWriter().write("Something went wrong but we dont care"); } }
We can then create an instance of our binding and register it in the Spring registry as follows:
<bean id="mybinding"class="com.mycompany.MyHttpBinding"/>
And then we can reference this binding when we define the route:
<route><from uri="jetty:http://0.0.0.0:8080/myapp/myservice?httpBindingRef=mybinding"/><to uri="bean:doSomething"/></route>
Jetty handlers and security configuration
You can configure a list of Jetty handlers on the endpoint, which can be useful for enabling advanced Jetty security features. These handlers are configured in Spring XML as follows:
<-- Jetty Security handling --> <bean id="userRealm" class="org.mortbay.jetty.plus.jaas.JAASUserRealm"> <property name="name" value="tracker-users"/> <property name="loginModuleName" value="ldaploginmodule"/> </bean> <bean id="constraint" class="org.mortbay.jetty.security.Constraint"> <property name="name" value="BASIC"/> <property name="roles" value="tracker-users"/> <property name="authenticate" value="true"/> </bean> <bean id="constraintMapping" class="org.mortbay.jetty.security.ConstraintMapping"> <property name="constraint" ref="constraint"/> <property name="pathSpec" value="/*"/> </bean> <bean id="securityHandler" class="org.mortbay.jetty.security.SecurityHandler"> <property name="userRealm" ref="userRealm"/> <property name="constraintMappings" ref="constraintMapping"/> </bean>
And from Camel 2.3 onwards you can configure a list of Jetty handlers as follows:
<-- Jetty Security handling --> <bean id="constraint" class="org.eclipse.jetty.http.security.Constraint"> <property name="name" value="BASIC"/> <property name="roles" value="tracker-users"/> <property name="authenticate" value="true"/> </bean> <bean id="constraintMapping" class="org.eclipse.jetty.security.ConstraintMapping"> <property name="constraint" ref="constraint"/> <property name="pathSpec" value="/*"/> </bean> <bean id="securityHandler" class="org.eclipse.jetty.security.ConstraintSecurityHandler"> <property name="authenticator"> <bean class="org.eclipse.jetty.security.authentication.BasicAuthenticator"/> </property> <property name="constraintMappings"> <list> <ref bean="constraintMapping"/> </list> </property> </bean>
You can then define the endpoint as:
from("jetty:http://0.0.0.0:9080/myservice?handlers=securityHandler")
If you need more handlers, set the
handlers
option equal to a comma-separated list of bean IDs.
How to return a custom HTTP 500 reply message
You may want to return a custom reply message when something goes wrong, instead of the default reply message Camel Jetty replies with. You could use a custom
HttpBinding
to be in control of the message mapping, but often it may be easier to use Camel's Exception Clause to construct the custom reply message. For example as show here, where we return Dude something went wrong
with HTTP error code 500:
from("jetty://http://localhost:{{port}}/myserver") // use onException to catch all exceptions and return a custom reply message .onException(Exception.class) .handled(true) // create a custom failure response .transform(constant("Dude something went wrong")) // we must remember to set error code 500 as handled(true) // otherwise would let Camel thing its a OK response (200) .setHeader(Exchange.HTTP_RESPONSE_CODE, constant(500)) .end() // now just force an exception immediately .throwException(new IllegalArgumentException("I cannot do this"));
Multi-part Form support
From Camel 2.3.0, camel-jetty support to multipart form post out of box. The submitted form-data are mapped into the message header. Camel-jetty creates an attachment for each uploaded file. The file name is mapped to the name of the attachment. The content type is set as the content type of the attachment file name. You can find the example here.
// Set the jetty temp directory which store the file for multi part form // camel-jetty will clean up the file after it handled the request. // The option works rightly from Camel 2.4.0 getContext().getProperties().put("CamelJettyTempDir", "target"); from("jetty://http://localhost:{{port}}/test").process(new Processor() { public void process(Exchange exchange) throws Exception { Message in = exchange.getIn(); assertEquals("Get a wrong attachement size", 1, in.getAttachments().size()); // The file name is attachment id DataHandler data = in.getAttachment("NOTICE.txt"); assertNotNull("Should get the DataHandle NOTICE.txt", data); // This assert is wrong, but the correct content-type (application/octet-stream) // will not be returned until Jetty makes it available - currently the content-type // returned is just the default for FileDataHandler (for the implentation being used) //assertEquals("Get a wrong content type", "text/plain", data.getContentType()); assertEquals("Got the wrong name", "NOTICE.txt", data.getName()); assertTrue("We should get the data from the DataHandle", data.getDataSource() .getInputStream().available() > 0); // The other form date can be get from the message header exchange.getOut().setBody(in.getHeader("comment")); } });
Jetty JMX support
From Camel 2.3.0, camel-jetty supports the enabling of Jetty's JMX capabilities at the component and endpoint level with the endpoint configuration taking priority. Note that JMX must be enabled within the Camel context in order to enable JMX support in this component as the component provides Jetty with a reference to the MBeanServer registered with the Camel context. Because the camel-jetty component caches and reuses Jetty resources for a given protocol/host/port pairing, this configuration option will only be evaluated during the creation of the first endpoint to use a protocol/host/port pairing. For example, given two routes created from the following XML fragments, JMX support would remain enabled for all endpoints listening on "https://0.0.0.0".
<from uri="jetty:https://0.0.0.0/myapp/myservice1/?enableJmx=true"/>
<from uri="jetty:https://0.0.0.0/myapp/myservice2/?enableJmx=false"/>
The camel-jetty component also provides for direct configuration of the Jetty MBeanContainer. Jetty creates MBean names dynamically. If you are running another instance of Jetty outside of the Camel context and sharing the same MBeanServer between the instances, you can provide both instances with a reference to the same MBeanContainer in order to avoid name collisions when registering Jetty MBeans.