検索
サポートコンソール開発者トライアルの開始お問い合わせ

このコンテンツは選択した言語では利用できません。

Chapter 9. Working with Large Messages

download PDF

You can configure AMQ Broker to store large messages on a physical disk or in a database table. Handling large messages in this way avoids the memory overhead that occurs when storing several large messages in memory.

AMQ Broker can persist large messages even if the client and broker are running with limited memory. The maximum size of a large message depends only on the amount of space available for your physical disk or database table.

Note

Large message support is available for the AMQP, Core, and OpenWire protocols. Additionally, the STOMP protocol provides its own method for handling large messages. See "Handling Large Messages with STOMP" for more information.

Note

If you persist large messages on a disk, it is recommended that the large messages directory be located on a different volume than the one used to persist the message journal or the paging directory.

9.1. Preparing Brokers to Store Large Messages

Large messages are stored on physical disk or database table. You must configure the broker to specify where large messages are stored.

Procedure

  • Add configuration to BROKER_INSTANCE_DIR/etc/broker.xml that references the storage location for large messages.

    • If you are storing large messages on disk, add the large-messages-directory configuration element and provide the file system location, as shown in the following example: 

      <configuration>
  <core>
    ...
    <large-messages-directory>/path/to/large-messages</large-messages-directory> 1
    ...
  </core>
</configuration>
      1
      The default value for the large-messages-directory configuration element is BROKER_INSTANCE_DIR/data/largemessages

    • If you are storing large messages in a database table, add the name of the table to your database-store, as shown in the following example: 

      <store>
  <database-store>
    ...
    <large-message-table>MY_TABLE</large-message-table> 1
  </database-store>
</store>
      1
      The default value for the large-message-table configuration element is LARGE_MESSAGE_TABLE.
      Note

      Handling large AMQP messages: The broker treats AMQP messages that are larger than the size of either the journal-buffer-size or journal-file-size as large messages. For more information about the journal, see Messaging Journal Configuration Elements.

      Additional Resources

See the large-message example found under BROKER_INSTANCE_DIR/examples/standard/ for a working example showing how to work with large messages.

For more information about configuring a data-store see Configuring JDBC Persistence.

9.2. Preparing AMQ Core Protocol JMS Clients to Send Large Messages

You prepare client connections to handle large messages by setting a value for the property minLargeMessageSize. The value can be provided as a parameter in the connection URL, or it can be set by using a supported client API. Any message larger than minLargeMessageSize is considered a large message.

Note

AMQ Broker messages are encoded using two bytes per character. Therefore, if the message data is filled with ASCII characters (which are one byte in size), the size of the resulting message would roughly double. When setting the value of minLargeMessageSize, remember that encoding can increase message size. The default value for minLargeMessageSize` is 100KiB.

Procedure

  • Set the minimum size for large messages.

    • If you are using JNDI to instantiate your connection factory, set the size in a jndi.properties file by using the parameter minLargeMessageSize. 

      java.naming.factory.initial=org.apache.activemq.artemis.jndi.ActiveMQInitialContextFactory
connectionFactory.myConnectionFactory=tcp://localhost:61616?minLargeMessageSize=250000

    • If you are not using JNDI, set the size using the method ActiveMQConnectionFactory.setMinLargeMessageSize(). 

      ConnectionFactory cf =  ActiveMQJMSClient.createConnectionFactory(...)
cf.setMinLargeMessageSize(250000);

9.3. Preparing OpenWire Clients to Send Large Messages

Note

Configuration options added to the connection URI used by an AMQ OpenWire JMS client must include the prefix wireFormat. to take effect. Options missing this prefix are ignored.

Procedure

  • Set the minimum size for large messages.

    • If you are using JNDI to instantiate your connection factory, set the size in a jndi.properties file by using the parameter minLargeMessageSize. You must add the prefix wireFormat. to the parameter for it to take effect. 

      java.naming.factory.initial=org.apache.activemq.artemis.jndi.ActiveMQInitialContextFactory
connectionFactory.myConnectionFactory=tcp://localhost:61616?wireFormat.minLargeMessageSize=250000

    • If you are not using JNDI, set the size using the method ActiveMQConnectionFactory.setMinLargeMessageSize(). 

      ConnectionFactory cf =  ActiveMQJMSClient.createConnectionFactory(...)
cf.setMinLargeMessageSize(250000);

9.4. Sending Large Messages

AMQ Broker supports Java-based InputStreams for sending large messages. The most common use case is to send files stored on your disk, but you could also send the data as JDBC Blobs or JSON objects recovered from HTTPRequests.

Note

When using JMS, streaming large messages is supported only when using StreamMessage and BytesMessage.

Procedure

  • To send a large message, set the JMS_AMQ_InputStream property to mark the message as streamed: 

    BytesMessage message = session.createBytesMessage();
FileInputStream fileInputStream = new FileInputStream(fileInput);
BufferedInputStream bufferedInput = new BufferedInputStream(fileInputStream);
message.setObjectProperty("JMS_AMQ_InputStream", bufferedInput);
...

9.5. Receiving Large Messages

The AMQ Broker Core JMS API has a method for synchronously receiving a streamed message. The methods block further processing until the input stream is completely received.

Procedure

  • To receive a large message, set the JMS_AMQ_SaveStream on the message object: 

    BytesMessage messageReceived = (BytesMessage)messageConsumer.receive(120000);
File outputFile = new File("large_message_received.dat");
FileOutputStream fileOutputStream = new FileOutputStream(outputFile);
BufferedOutputStream bufferedOutput = new BufferedOutputStream(fileOutputStream);

// This will block until the entire content is saved on disk
messageReceived.setObjectProperty("JMS_AMQ_SaveStream", bufferedOutput);

Receiving a Large Message Asynchronously

The Core JMS API also has a method for asynchronously receiving a streamed message. The method does not block processing by a consumer while it receives the input stream.

Procedure

  • To receive a large message asynchronously, set the JMS_AMQ_OutputStream parameter on the message object: 

    BytesMessage messageReceived = (BytesMessage)messageConsumer.receive(120000);
File outputFile = new File("large_message_received.dat");
FileOutputStream fileOutputStream = new FileOutputStream(outputFile);
BufferedOutputStream bufferedOutput = new BufferedOutputStream(fileOutputStream);

// This will not block until the entire content is saved on disk
messageReceived.setObjectProperty("JMS_AMQ_OutputStream", bufferedOutput);

9.6. Large Messages and Java Clients

There are a two recommended options available to Java developers who are writing clients that use large messages.

One option is to use an instance of InputStream and OutputStream. For example, a FileInputStream could be used to send a message taken from a large file on a physical disk. A FileOutputStream could then be used by the receiver to stream the message to a location on its local file system.

Another option is to stream a JMS BytesMessage or StreamMessage directly: 

BytesMessage rm = (BytesMessage)cons.receive(10000);
byte data[] = new byte[1024];
for (int i = 0; i < rm.getBodyLength(); i += 1024)
{
   int numberOfBytes = rm.readBytes(data);
   // Do whatever you want with the data
}

9.7. Compressing Large Messages

You can enable clients to compress large messages before sending them. The ZIP algorithm is used to compress the message body as the message is sent to the broker.

Note

If the compressed size of a large message is less than the value of minLargeMessageSize, the message is sent as a regular message. Therefore, it is not written to the broker’s large-message data directory.

  • If you use a Core JMS client and JNDI, use the JNDI context environment to enable message compression: 

    java.naming.factory.initial=org.apache.activemq.artemis.jndi.ActiveMQInitialContextFactory
connectionFactory.myConnectionFactory=tcp://localhost:61616?compressLargeMessages=true

  • Add the minLargeMessageSize parameter to the connection factory URL to set the minimum size requirement for messages to be compressed. In the following example, messages are compressed only when they exceed 250 kilobytes in size. 

    connectionFactory.myConnectionFactory=tcp://localhost:61616?compressLargeMessages=true&minLargeMessageSize=250kb

9.8. Handling Large Messages with STOMP

STOMP clients might send large bodies of frames, which can exceed the size of the broker’s internal buffer, causing unexpected errors.

To prevent this situation from occurring, set the acceptor’s stompMinLargeMessageSize parameter to the desired size. Proper sizing is affected by system resources such as the amount of disk space available, as well as the size of the messages. It is recommended that you run performance tests using several values for stompMinLargeMessageSize to determine an appropriate size.

The broker checks the size of the body of each STOMP frame coming from connections established with this acceptor. If the size of the body is equal to or greater than the value of stompMinLargeMessageSize, the message is persisted as a large message.

Procedure

  1. Open the configuration file BROKER_INSTANCE_DIR/etc/broker.xml
  2. Add the stompMinLargeMessageSize parameter and its desired value to an existing or new acceptor, as shown in the following example: 
<acceptors>
  <acceptor name="stomp-acceptor">tcp://localhost:61613?protocols=STOMP;stompMinLargeMessageSize=10240</acceptor>
  ...
</acceptors>

In the preceding example, the broker is configured to accept STOMP messages on port 61613. If the acceptor receives a STOMP frame with a body larger than or equal to 10240 bytes the broker will persist it as a large message.

When a large message is delivered to a STOMP consumer, the broker automatically converts it from a large message to a normal message before sending it to the client. If a large message is compressed, the broker decompresses it before sending it to STOMP clients.

The default value of stompMinLargeMessageSize is 102400 bytes.

Red Hat logoGithubRedditYoutubeTwitter

詳細情報

試用、購入および販売

コミュニティー

Red Hat ドキュメントについて

Red Hat をお使いのお客様が、信頼できるコンテンツが含まれている製品やサービスを活用することで、イノベーションを行い、目標を達成できるようにします。

多様性を受け入れるオープンソースの強化

Red Hat では、コード、ドキュメント、Web プロパティーにおける配慮に欠ける用語の置き換えに取り組んでいます。このような変更は、段階的に実施される予定です。詳細情報: Red Hat ブログ.

会社概要

Red Hat は、企業がコアとなるデータセンターからネットワークエッジに至るまで、各種プラットフォームや環境全体で作業を簡素化できるように、強化されたソリューションを提供しています。

© 2024 Red Hat, Inc.