Red Hat Summit Red Hat Summitサポートコンソール開発者トライアルの開始お問い合わせ

2.14. Migrating from iptables to nftables

If your firewall configuration still uses iptables rules, you can migrate your iptables rules to nftables.

重要

The ipset and iptables-nft packages have been deprecated in Red Hat Enterprise Linux 9. This includes deprecation of nft-variants such as iptables, ip6tables, arptables, and ebtables utilities. If you are using any of these tools, for example, because you upgraded from an earlier RHEL version, migrate to the nft command-line tool provided by the nftables package.

2.14.1. Concepts in the deprecated iptables framework
リンクのコピー

Similar to the actively-maintained nftables framework, the deprecated iptables framework enables you to perform a variety of packet filtering tasks, logging and auditing, NAT-related configuration tasks, and more.

The iptables framework is structured into multiple tables, where each table is designed for a specific purpose:

filter
The default table, ensures general packet filtering
nat
For Network Address Translation (NAT), includes altering the source and destination addresses of packets
mangle
For specific packet alteration, enables you to do modification of packet headers for advanced routing decisions
raw
For configurations that need to happen before connection tracking

These tables are implemented as separate kernel modules, where each table offers a fixed set of builtin chains such as INPUT, OUTPUT, and FORWARD. A chain is a sequence of rules that packets are evaluated against. These chains hook into specific points in the packet processing flow in the kernel. The chains have the same names across different tables, however their order of execution is determined by their respective hook priorities. The priorities are managed internally by the kernel to make sure that the rules are applied in the correct sequence.

Originally, iptables was designed to process IPv4 traffic. However, with the inception of the IPv6 protocol, the ip6tables utility needed to be introduced to provide comparable functionality (as iptables) and enable users to create and manage firewall rules for IPv6 packets. With the same logic, the arptables utility was created to process Address Resolution Protocol (ARP) and the ebtables utility was developed to handle Ethernet bridging frames. These tools ensure that you can apply the packet filtering abilities of iptables across various network protocols and provide comprehensive network coverage.

To enhance the functionality of iptables, the extensions started to be developed. The functionality extensions are typically implemented as kernel modules that are paired with user-space dynamic shared objects (DSOs). The extensions introduce "matches" and "targets" that you can use in firewall rules to perform more sophisticated operations. Extensions can enable complex matches and targets. For instance you can match on, or manipulate specific layer 4 protocol header values, perform rate-limiting, enforce quotas, and so on. Some extensions are designed to address limitations in the default iptables syntax, for example the "multiport" match extension. This extension allows a single rule to match multiple, non-consecutive ports to simplify rule definitions, and thereby reducing the number of individual rules required.

An ipset is a special kind of functionality extension to iptables. It is a kernel-level data structure that is used together with iptables to create collections of IP addresses, port numbers, and other network-related elements that you can match against packets. These sets significantly streamline, optimize, and accelerate the process of writing and managing firewall rules.

For more details, see the iptables(8) man page on your system.

2.14.2. Converting iptables and ip6tables rule sets to nftables
リンクのコピー

Use the iptables-restore-translate and ip6tables-restore-translate utilities to translate iptables and ip6tables rule sets to nftables.

Prerequisites

  • The nftables and iptables packages are installed.
  • The system has iptables and ip6tables rules configured.

Procedure

  1. Write the iptables and ip6tables rules to a file: 

    # iptables-save >/root/iptables.dump
# ip6tables-save >/root/ip6tables.dump

  2. Convert the dump files to nftables instructions: 

    # iptables-restore-translate -f /root/iptables.dump > /etc/nftables/ruleset-migrated-from-iptables.nft
# ip6tables-restore-translate -f /root/ip6tables.dump > /etc/nftables/ruleset-migrated-from-ip6tables.nft
  3. Review and, if needed, manually update the generated nftables rules.

  4. To enable the nftables service to load the generated files, add the following to the /etc/sysconfig/nftables.conf file: 

    include "/etc/nftables/ruleset-migrated-from-iptables.nft"
include "/etc/nftables/ruleset-migrated-from-ip6tables.nft"

  5. Stop and disable the iptables service: 

    # systemctl disable --now iptables

    If you used a custom script to load the iptables rules, ensure that the script no longer starts automatically and reboot to flush all tables.

  6. Enable and start the nftables service: 

    # systemctl enable --now nftables

Verification

  • Display the nftables rule set: 

    # nft list ruleset

2.14.3. Converting single iptables and ip6tables rules to nftables
リンクのコピー

RHEL provides the iptables-translate and ip6tables-translate utilities to convert an iptables or ip6tables rule into the equivalent one for nftables.

Prerequisites

  • The nftables package is installed.

Procedure

  • Use the iptables-translate or ip6tables-translate utility instead of iptables or ip6tables to display the corresponding nftables rule, for example: 

    # iptables-translate -A INPUT -s 192.0.2.0/24 -j ACCEPT
nft add rule ip filter INPUT ip saddr 192.0.2.0/24 counter accept

    Note that some extensions lack translation support. In these cases, the utility prints the untranslated rule prefixed with the # sign, for example: 

    # iptables-translate -A INPUT -j CHECKSUM --checksum-fill
nft # -A INPUT -j CHECKSUM --checksum-fill

2.14.4. Comparison of common iptables and nftables commands
リンクのコピー

The following is a comparison of common iptables and nftables commands.

  • Listing all rules:

    Expand
    iptablesnftables

    iptables-save

    nft list ruleset

  • Listing a certain table and chain:

    Expand
    iptablesnftables

    iptables -L

    nft list table ip filter

    iptables -L INPUT

    nft list chain ip filter INPUT

    iptables -t nat -L PREROUTING

    nft list chain ip nat PREROUTING

    The nft command does not pre-create tables and chains. They exist only if a user created them manually.

    Listing rules generated by firewalld: 

    # nft list table inet firewalld
# nft list table ip firewalld
# nft list table ip6 firewalld
Red Hat logoGithubredditYoutubeTwitter

詳細情報

試用、購入および販売

コミュニティー

Red Hat ドキュメントについて

Red Hat をお使いのお客様が、信頼できるコンテンツが含まれている製品やサービスを活用することで、イノベーションを行い、目標を達成できるようにします。 最新の更新を見る.

多様性を受け入れるオープンソースの強化

Red Hat では、コード、ドキュメント、Web プロパティーにおける配慮に欠ける用語の置き換えに取り組んでいます。このような変更は、段階的に実施される予定です。詳細情報: Red Hat ブログ.

会社概要

Red Hat は、企業がコアとなるデータセンターからネットワークエッジに至るまで、各種プラットフォームや環境全体で作業を簡素化できるように、強化されたソリューションを提供しています。

Theme

© 2026 Red Hatトップに戻る