Red Hat Summit Red Hat Summitサポートコンソール開発者トライアルの開始お問い合わせ

このコンテンツは選択した言語では利用できません。

Chapter 5. The WS-Policy Framework

Abstract

This chapter provides an introduction to the basic concepts of the WS-Policy framework, defining policy subjects and policy assertions, and explaining how policy assertions can be combined to make policy expressions.

5.1. Introduction to WS-Policy
リンクのコピー

Overview
リンクのコピー

The WS-Policy specification provides a general framework for applying policies that modify the semantics of connections and communications at runtime in a Web services application. Apache CXF security uses the WS-Policy framework to configure message protection and authentication requirements.

Policies and policy references
リンクのコピー

The simplest way to specify a policy is to embed it directly where you want to apply it. For example, to associate a policy with a specific port in the WSDL contract, you can specify it as follows: 
<wsdl:definitions targetNamespace="http://tempuri.org/"
    xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
    xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
    xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd"
    xmlns:wsp="http://schemas.xmlsoap.org/ws/2004/09/policy" ... >
  ...
  <wsdl:service name="PingService10">
    <wsdl:port name="UserNameOverTransport_IPingService" binding="BindingName">
      <wsp:Policy>
        <!-- Policy expression comes here! -->
      </wsp:Policy>
      <soap:address location="SOAPAddress"/>
    </wsdl:port>
  </wsdl:service>
</wsdl:definitions>
Copy to Clipboard Toggle word wrap
An alternative way to specify a policy is to insert a policy reference element, wsp:PolicyReference, at the point where you want to apply the policy and then insert the policy element, wsp:Policy, at some other point in the XML file. For example, to associate a policy with a specific port using a policy reference, you could use a configuration like the following: 
<wsdl:definitions targetNamespace="http://tempuri.org/"
    xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
    xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
    xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd"
    xmlns:wsp="http://schemas.xmlsoap.org/ws/2004/09/policy" ... >
  ...
  <wsdl:service name="PingService10">
    <wsdl:port name="UserNameOverTransport_IPingService" binding="BindingName">
 <wsp:PolicyReference URI="#PolicyID"/>
      <soap:address location="SOAPAddress"/>
    </wsdl:port>
  </wsdl:service>
  ...
  <wsp:Policy wsu:Id="PolicyID">
    <!-- Policy expression comes here ... -->
  </wsp:Policy>
</wsdl:definitions>
Copy to Clipboard Toggle word wrap
Where the policy reference, wsp:PolicyReference, locates the referenced policy using the ID, PolicyID (note the addition of the # prefix character in the URI attribute). The policy itself, wsp:Policy, must be identified by adding the attribute, wsu:Id="PolicyID".

Policy subjects
リンクのコピー

The entities with which policies are associated are called policy subjects. For example, you can associate a policy with an endpoint, in which case the endpoint is the policy subject. It is possible to associate multiple policies with any given policy subject. The WS-Policy framework supports the following kinds of policy subject:

Service policy subject
リンクのコピー

To associate a policy with a service, insert either a <wsp:Policy> element or a <wsp:PolicyReference> element as a sub-element of the following WSDL 1.1 element:
  • wsdl:service—apply the policy to all of the ports (endpoints) offered by this service.

Endpoint policy subject
リンクのコピー

To associate a policy with an endpoint, insert either a <wsp:Policy> element or a <wsp:PolicyReference> element as a sub-element of any of the following WSDL 1.1 elements:
  • wsdl:portType—apply the policy to all of the ports (endpoints) that use this port type.
  • wsdl:binding—apply the policy to all of the ports that use this binding.
  • wsdl:port—apply the policy to this endpoint only.
For example, you can associate a policy with an endpoint binding as follows (using a policy reference): 
<wsdl:definitions targetNamespace="http://tempuri.org/"
    xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
    xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd"
    xmlns:wsp="http://schemas.xmlsoap.org/ws/2004/09/policy" ... >
  ...
  <wsdl:binding name="EndpointBinding" type="i0:IPingService">
    <wsp:PolicyReference URI="#PolicyID"/>
    ...
  </wsdl:binding>
  ...
  <wsp:Policy wsu:Id="PolicyID"> ... </wsp:Policy>
  ...
</wsdl:definitions>
Copy to Clipboard Toggle word wrap

Operation policy subject
リンクのコピー

To associate a policy with an operation, insert either a <wsp:Policy> element or a <wsp:PolicyReference> element as a sub-element of any of the following WSDL 1.1 elements:
  • wsdl:portType/wsdl:operation
  • wsdl:binding/wsdl:operation
For example, you can associate a policy with an operation in a binding as follows (using a policy reference): 
<wsdl:definitions targetNamespace="http://tempuri.org/"
    xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
    xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
    xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd"
    xmlns:wsp="http://schemas.xmlsoap.org/ws/2004/09/policy" ... >
  ...
  <wsdl:binding name="EndpointBinding" type="i0:IPingService">
    <wsdl:operation name="Ping">
      <wsp:PolicyReference URI="#PolicyID"/>
      <soap:operation soapAction="http://xmlsoap.org/Ping" style="document"/>
      <wsdl:input name="PingRequest"> ... </wsdl:input>
      <wsdl:output name="PingResponse"> ... </wsdl:output>
    </wsdl:operation>
    ...
  </wsdl:binding>
  ...
  <wsp:Policy wsu:Id="PolicyID"> ... </wsp:Policy>
  ...
</wsdl:definitions>
Copy to Clipboard Toggle word wrap

Message policy subject
リンクのコピー

To associate a policy with a message, insert either a <wsp:Policy> element or a <wsp:PolicyReference> element as a sub-element of any of the following WSDL 1.1 elements:
  • wsdl:message
  • wsdl:portType/wsdl:operation/wsdl:input
  • wsdl:portType/wsdl:operation/wsdl:output
  • wsdl:portType/wsdl:operation/wsdl:fault
  • wsdl:binding/wsdl:operation/wsdl:input
  • wsdl:binding/wsdl:operation/wsdl:output
  • wsdl:binding/wsdl:operation/wsdl:fault
For example, you can associate a policy with a message in a binding as follows (using a policy reference): 
<wsdl:definitions targetNamespace="http://tempuri.org/"
    xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
    xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
    xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd"
    xmlns:wsp="http://schemas.xmlsoap.org/ws/2004/09/policy" ... >
  ...
  <wsdl:binding name="EndpointBinding" type="i0:IPingService">
    <wsdl:operation name="Ping">
      <soap:operation soapAction="http://xmlsoap.org/Ping" style="document"/>
      <wsdl:input name="PingRequest">
        <wsp:PolicyReference URI="#PolicyID"/>
        <soap:body use="literal"/>
      </wsdl:input>
      <wsdl:output name="PingResponse"> ... </wsdl:output>
    </wsdl:operation>
    ...
  </wsdl:binding>
  ...
  <wsp:Policy wsu:Id="PolicyID"> ... </wsp:Policy>
  ...
</wsdl:definitions>
Copy to Clipboard Toggle word wrap
トップに戻る
Red Hat logoGithubredditYoutubeTwitter

詳細情報

試用、購入および販売

コミュニティー

Red Hat ドキュメントについて

Red Hat をお使いのお客様が、信頼できるコンテンツが含まれている製品やサービスを活用することで、イノベーションを行い、目標を達成できるようにします。 最新の更新を見る.

多様性を受け入れるオープンソースの強化

Red Hat では、コード、ドキュメント、Web プロパティーにおける配慮に欠ける用語の置き換えに取り組んでいます。このような変更は、段階的に実施される予定です。詳細情報: Red Hat ブログ.

会社概要

Red Hat は、企業がコアとなるデータセンターからネットワークエッジに至るまで、各種プラットフォームや環境全体で作業を簡素化できるように、強化されたソリューションを提供しています。

Theme

© 2025 Red Hat