このコンテンツは選択した言語では利用できません。

Chapter 103. Netty4


Netty4 Component

Available as of Camel 2.14
The Netty4 component in Camel is a socket communication component, based on the Netty project version 4. Netty is a NIO client server framework which enables quick and easy development of netwServerInitializerFactoryork applications such as protocol servers and clients. Netty4 greatly simplifies and streamlines network programming such as TCP and UDP socket server.
This camel component supports both producer and consumer endpoints.
The Netty component has several options and allows fine-grained control of a number of TCP/UDP communication parameters (buffer sizes, keepAlives, tcpNoDelay etc) and facilitates both In-Only and In-Out communication on a Camel route.
Maven users will need to add the following dependency to their pom.xml for this component:
<dependency>
    <groupId>org.apache.camel</groupId>
    <artifactId>camel-netty4</artifactId>
    <version>x.x.x</version>
    <!-- use the same version as your Camel core version -->
</dependency>

URI format

The URI scheme for a netty component is as follows
netty4:tcp://localhost:99999[?options]
netty4:udp://remotehost:99999/[?options]
This component supports producer and consumer endpoints for both TCP and UDP.
You can append query options to the URI in the following format, ?option=value&option=value&...

Options

Name
Default Value
Description
keepAlive
true
Setting to ensure socket is not closed due to inactivity
tcpNoDelay
true
Setting to improve TCP protocol performance
backlog
Allows to configure a backlog for netty consumer (server). Note the backlog is just a best effort depending on the OS. Setting this option to a value such as 200, 500 or 1000, tells the TCP stack how long the "accept" queue can be. If this option is not configured, then the backlog depends on OS setting.
broadcast
false
Setting to choose Multicast over UDP
connectTimeout
10000
Time to wait for a socket connection to be available. Value is in millis.
reuseAddress
true
Setting to facilitate socket multiplexing
sync
true
Setting to set endpoint as one-way or request-response
synchronous
false
Whether Asynchronous Routing Engine is not in use. false then the Asynchronous Routing Engine is used, true to force processing synchronous.
ssl
false
Setting to specify whether SSL encryption is applied to this endpoint
sslClientCertHeaders
false
When enabled and in SSL mode, then the Netty consumer will enrich the Camel Message with headers having information about the client certificate such as subject name, issuer name, serial number, and the valid date range.
sendBufferSize
65536 bytes
The TCP/UDP buffer sizes to be used during outbound communication. Size is bytes.
receiveBufferSize
65536 bytes
The TCP/UDP buffer sizes to be used during inbound communication. Size is bytes.
option.XXX
null
Allows to configure additional netty options using "option." as prefix. For example "option.child.keepAlive=false" to set the netty option "child.keepAlive=false". See the Netty documentation for possible options that can be used.
corePoolSize
10
The number of allocated threads at component startup. Defaults to 10. Note: This option is removed from Camel 2.9.2 onwards. As we rely on Nettys default settings.
maxPoolSize
100
The maximum number of threads that may be allocated to this endpoint. Defaults to 100. Note: This option is removed from Camel 2.9.2 onwards. As we rely on Nettys default settings.
disconnect
false
Whether or not to disconnect(close) from Netty Channel right after use. Can be used for both consumer and producer.
lazyChannelCreation
true
Channels can be lazily created to avoid exceptions, if the remote server is not up and running when the Camel producer is started.
transferExchange
false
Only used for TCP. You can transfer the exchange over the wire instead of just the body. The following fields are transferred: In body, Out body, fault body, In headers, Out headers, fault headers, exchange properties, exchange exception. This requires that the objects are serializable. Camel will exclude any non-serializable objects and log it at WARN level.
disconnectOnNoReply
true
If sync is enabled then this option dictates NettyConsumer if it should disconnect where there is no reply to send back.
noReplyLogLevel
WARN
If sync is enabled this option dictates NettyConsumer which logging level to use when logging a there is no reply to send back. Values are: FATAL, ERROR, INFO, DEBUG, OFF.
serverExceptionCaughtLogLevel
WARN
If the server (NettyConsumer) catches an exception then its logged using this logging level.
serverClosedChannelExceptionCaughtLogLevel
DEBUG
If the server (NettyConsumer) catches an java.nio.channels.ClosedChannelException then its logged using this logging level. This is used to avoid logging the closed channel exceptions, as clients can disconnect abruptly and then cause a flod of closed exceptions in the Netty server.
allowDefaultCodec
true
The netty component installs a default codec if both, encoder/deocder is null and textline is false. Setting allowDefaultCodec to false prevents the netty component from installing a default codec as the first element in the filter chain.
textline
false
Only used for TCP. If no codec is specified, you can use this flag to indicate a text line based codec; if not specified or the value is false, then Object Serialization is assumed over TCP.
delimiter
LINE
The delimiter to use for the textline codec. Possible values are LINE and NULL.
decoderMaxLineLength
1024
The max line length to use for the textline codec.
autoAppendDelimiter
true
Whether or not to auto append missing end delimiter when sending using the textline codec.
encoding
null
The encoding (a charset name) to use for the textline codec. If not provided, Camel will use the JVM default Charset.
workerCount
null
When netty works on nio mode, it uses default workerCount parameter from Netty, which is cpu_core_threads*2. User can use this operation to override the default workerCount from Netty
sslContextParameters
null
SSL configuration using an org.apache.camel.util.jsse.SSLContextParameters instance. See Using the JSSE Configuration Utility.
receiveBufferSizePredictor
null
Configures the buffer size predictor. See details at Jetty documentation and this mail thread.
requestTimeout
0
Allows to use a timeout for the Netty producer when calling a remote server. By default no timeout is in use. The value is in milli seconds. The requestTimeout uses Netty's ReadTimeoutHandler to trigger the timeout.
needClientAuth
false
Configures whether the server needs client authentication when using SSL.
usingExecutorService
true
Whether to use executorService to handle the message inside the camel route, the executorService can be set from NettyComponent.
maximumPoolSize
16
The core pool size for the ordered thread pool, if its in use.
producerPoolEnabled
true
Producer only. Whether producer pool is enabled or not. Important: Do not turn this off, as the pooling is needed for handling concurrency and reliable request/reply.
producerPoolMaxActive
-1
Producer only. Sets the cap on the number of objects that can be allocated by the pool (checked out to clients, or idle awaiting checkout) at a given time. Use a negative value for no limit.
producerPoolMinIdle
0
Producer only. Sets the minimum number of instances allowed in the producer pool before the evictor thread (if active) spawns new objects.
producerPoolMaxIdle
100
Producer only. Sets the cap on the number of "idle" instances in the pool.
producerPoolMinEvictableIdle
30000
Producer only. Sets the minimum amount of time (value in millis) an object may sit idle in the pool before it is eligible for eviction by the idle object evictor.
bootstrapConfiguration
null
Consumer only. Allows to configure the Netty ServerBootstrap options using a org.apache.camel.component.netty4.NettyServerBootstrapConfiguration instance. This can be used to reuse the same configuration for multiple consumers, to align their configuration more easily.
bossPoll
null
To use a explicit io.netty.channel.EventLoopGroup as the boss thread pool. For example to share a thread pool with multiple consumers. By default each consumer has their own boss pool with 1 core thread.
workerPool
null
To use a explicit io.netty.channel.EventLoopGroup as the worker thread pool. For example to share a thread pool with multiple consumers. By default each consumer has their own worker pool with 2 x cpu count core threads.
networkInterface
null
Consumer only. When using UDP then this option can be used to specify a network interface by its name, such as eth0 to join a multicast group.
clientInitializerFactory null Camel 2.15: To use a custom client initializer factory to control the pipelines in the channel. See further below for more details.
serverInitializerFactory null Camel 2.15: To use a custom server initializer factory to control the pipelines in the channel. See further below for more details.
clientPipelineFactory null Deprecated: Use clientInitializerFactory instead.
serverPipelineFactory null Deprecated: Use serverInitializerFactory instead.
udpConnectionlessSending false Camel 2.15: Producer only. This option supports connectionless UDP sending, which is genuine fire-and-forget. A UDP send attempt receives the PortUnreachableException exception, if no one is listening on the receiving port.
clientMode false Camel 2.15: Consumer only. If clientMode is true, the Netty consumer connects to the address as a TCP client.

Registry based Options

Codec Handlers and SSL Keystores can be enlisted in the Registry, such as in the Spring XML file. The values that could be passed in, are the following:
Name
Description
passphrase
password setting to use in order to encrypt/decrypt payloads sent using SSH
keyStoreFormat
keystore format to be used for payload encryption. Defaults to "JKS" if not set
securityProvider
Security provider to be used for payload encryption. Defaults to "SunX509" if not set.
keyStoreFile
deprecated: Client side certificate keystore to be used for encryption
trustStoreFile
deprecated: Server side certificate keystore to be used for encryption
keyStoreResource
Camel 2.11.1: Client side certificate keystore to be used for encryption. Is loaded by default from classpath, but you can prefix with "classpath:", "file:", or "http:" to load the resource from different systems.
trustStoreResource
Camel 2.11.1: Server side certificate keystore to be used for encryption. Is loaded by default from classpath, but you can prefix with "classpath:", "file:", or "http:" to load the resource from different systems.
sslHandler
Reference to a class that could be used to return an SSL Handler
encoder
A custom ChannelHandler class that can be used to perform special marshalling of outbound payloads. Must override io.netty.channel.ChannelInboundHandlerAdapter.
encorders
A list of encoders to be used. You can use a String which have values separated by comma, and have the values be looked up in the Registry. Just remember to prefix the value with # so Camel knows it should lookup.
decoder
A custom ChannelHandler class that can be used to perform special marshalling of inbound payloads. Must override io.netty.channel.ChannelOutboundHandlerAdapter.
decoders
A list of decoders to be used. You can use a String which have values separated by comma, and have the values be looked up in the Registry. Just remember to prefix the value with # so Camel knows it should lookup.
Important: Read below about using non shareable encoders/decoders.

Using non shareable encoders or decoders

If your encoders or decoders is not shareable (eg they have the @Shareable class annotation), then your encoder/decoder must implement the org.apache.camel.component.netty.ChannelHandlerFactory interface, and return a new instance in the newChannelHandler method. This is to ensure the encoder/decoder can safely be used. If this is not the case, then the Netty component will log a WARN when an endpoint is created.
The Netty component offers a org.apache.camel.component.netty.ChannelHandlerFactories factory class, that has a number of commonly used methods.

Sending Messages to/from a Netty endpoint

Netty Producer

In Producer mode, the component provides the ability to send payloads to a socket endpoint using either TCP or UDP protocols (with optional SSL support).
The producer mode supports both one-way and request-response based operations.

Netty Consumer

In Consumer mode, the component provides the ability to:
  • listen on a specified socket using either TCP or UDP protocols (with optional SSL support),
  • receive requests on the socket using text/xml, binary and serialized object based payloads and
  • send them along on a route as message exchanges.
The consumer mode supports both one-way and request-response based operations.

Usage Samples

A UDP Netty endpoint using Request-Reply and serialized object payload

RouteBuilder builder = new RouteBuilder() {
  public void configure() {
    from("netty4:udp://localhost:5155?sync=true")
      .process(new Processor() {
         public void process(Exchange exchange) throws Exception {
           Poetry poetry = (Poetry) exchange.getIn().getBody();
           poetry.setPoet("Dr. Sarojini Naidu");
           exchange.getOut().setBody(poetry);
         }
       }
    }
};

A TCP based Netty consumer endpoint using One-way communication

RouteBuilder builder = new RouteBuilder() {
  public void configure() {
       from("netty4:tcp://localhost:5150")
           .to("mock:result");
  }
};

An SSL/TCP based Netty consumer endpoint using Request-Reply communication

Using the JSSE Configuration Utility

As of Camel 2.9, the Netty component supports SSL/TLS configuration through the Camel JSSE Configuration Utility. This utility greatly decreases the amount of component specific code you need to write and is configurable at the endpoint and component levels. The following examples demonstrate how to use the utility with the Netty component.

Programmatic configuration of the component

KeyStoreParameters ksp = new KeyStoreParameters();
ksp.setResource("/users/home/server/keystore.jks");
ksp.setPassword("keystorePassword");

KeyManagersParameters kmp = new KeyManagersParameters();
kmp.setKeyStore(ksp);
kmp.setKeyPassword("keyPassword");

SSLContextParameters scp = new SSLContextParameters();
scp.setKeyManagers(kmp);

NettyComponent nettyComponent = getContext().getComponent("netty4", NettyComponent.class);
nettyComponent.setSslContextParameters(scp);

Spring DSL based configuration of endpoint

...
  <camel:sslContextParameters
      id="sslContextParameters">
    <camel:keyManagers
        keyPassword="keyPassword">
      <camel:keyStore
          resource="/users/home/server/keystore.jks"
          password="keystorePassword"/>
    </camel:keyManagers>
  </camel:sslContextParameters>...
...
  <to uri="netty4:tcp://localhost:5150?sync=true&ssl=true&sslContextParameters=#sslContextParameters"/>
...

Using Basic SSL/TLS configuration on the Jetty Component

JndiRegistry registry = new JndiRegistry(createJndiContext());
registry.bind("password", "changeit");
registry.bind("ksf", new File("src/test/resources/keystore.jks"));
registry.bind("tsf", new File("src/test/resources/keystore.jks"));

context.createRegistry(registry);
context.addRoutes(new RouteBuilder() {
  public void configure() {
      String netty_ssl_endpoint =
         "netty4:tcp://localhost:5150?sync=true&ssl=true&passphrase=#password"
         + "&keyStoreFile=#ksf&trustStoreFile=#tsf";
      String return_string =
         "When You Go Home, Tell Them Of Us And Say,"
         + "For Your Tomorrow, We Gave Our Today.";

      from(netty_ssl_endpoint)
       .process(new Processor() {
          public void process(Exchange exchange) throws Exception {
            exchange.getOut().setBody(return_string);
          }
       }
  }
});

Getting access to SSLSession and the client certificate

Available as of Camel 2.12
You can get access to the javax.net.ssl.SSLSession if you eg need to get details about the client certificate. When ssl=true then the Netty4 component will store the SSLSession as a header on the Camel Message as shown below:
SSLSession session = exchange.getIn().getHeader(NettyConstants.NETTY_SSL_SESSION, SSLSession.class);
// get the first certificate which is client certificate
javax.security.cert.X509Certificate cert = session.getPeerCertificateChain()[0];
Principal principal = cert.getSubjectDN();
Remember to set needClientAuth=true to authenticate the client, otherwise SSLSession cannot access information about the client certificate, and you may get an exception javax.net.ssl.SSLPeerUnverifiedException: peer not authenticated. You may also get this exception if the client certificate is expired or not valid etc.
Tip
The option sslClientCertHeaders can be set to true which then enriches the Camel Message with headers having details about the client certificate. For example the subject name is readily available in the header CamelNettySSLClientCertSubjectName.

Using Multiple Codecs

In certain cases it may be necessary to add chains of encoders and decoders to the netty pipeline. To add multpile codecs to a camel netty endpoint the 'encoders' and 'decoders' uri parameters should be used. Like the 'encoder' and 'decoder' parameters they are used to supply references (to lists of ChannelUpstreamHandlers and ChannelDownstreamHandlers) that should be added to the pipeline. Note that if encoders is specified then the encoder param will be ignored, similarly for decoders and the decoder param.
Important
Read further above about using non shareable encoders/decoders.
The lists of codecs need to be added to the Camel's registry so they can be resolved when the endpoint is created.
ChannelHandlerFactory lengthDecoder = ChannelHandlerFactories.newLengthFieldBasedFrameDecoder(1048576, 0, 4, 0, 4);
 
StringDecoder stringDecoder = new StringDecoder();
registry.bind("length-decoder", lengthDecoder);
registry.bind("string-decoder", stringDecoder);
 
LengthFieldPrepender lengthEncoder = new LengthFieldPrepender(4);
StringEncoder stringEncoder = new StringEncoder();
registry.bind("length-encoder", lengthEncoder);
registry.bind("string-encoder", stringEncoder);
 
List<ChannelHandler> decoders = new ArrayList<ChannelHandler>();
decoders.add(lengthDecoder);
decoders.add(stringDecoder);
 
List<ChannelHandler> encoders = new ArrayList<ChannelHandler>();
encoders.add(lengthEncoder);
encoders.add(stringEncoder);
 
registry.bind("encoders", encoders);
registry.bind("decoders", decoders);

Spring's native collections support can be used to specify the codec lists in an application context
   
<util:list id="decoders" list-class="java.util.LinkedList">
        <bean class="org.apache.camel.component.netty4.ChannelHandlerFactories" factory-method="newLengthFieldBasedFrameDecoder">
            <constructor-arg value="1048576"/>
            <constructor-arg value="0"/>
            <constructor-arg value="4"/>
            <constructor-arg value="0"/>
            <constructor-arg value="4"/>
        </bean>
        <bean class="io.netty.handler.codec.string.StringDecoder"/>
    </util:list>

    <util:list id="encoders" list-class="java.util.LinkedList">
        <bean class="io.netty.handler.codec.LengthFieldPrepender">
            <constructor-arg value="4"/>
        </bean>
        <bean class="io.netty.handler.codec.string.StringEncoder"/>
    </util:list>

    <bean id="length-encoder" class="io.netty.handler.codec.LengthFieldPrepender">
        <constructor-arg value="4"/>
    </bean>
    <bean id="string-encoder" class="io.netty.handler.codec.string.StringEncoder"/>

    <bean id="length-decoder" class="org.apache.camel.component.netty4.ChannelHandlerFactories" factory-method="newLengthFieldBasedFrameDecoder">
        <constructor-arg value="1048576"/>
        <constructor-arg value="0"/>
        <constructor-arg value="4"/>
        <constructor-arg value="0"/>
        <constructor-arg value="4"/>
    </bean>
    <bean id="string-decoder" class="io.netty.handler.codec.string.StringDecoder"/>
The bean names can then be used in netty endpoint definitions either as a comma separated list or contained in a List e.g.
 from("direct:multiple-codec").to("netty4:tcp://localhost:{{port}}?encoders=#encoders&sync=false");
                
 from("netty4:tcp://localhost:{{port}}?decoders=#length-decoder,#string-decoder&sync=false").to("mock:multiple-codec");
or via spring.
   <camelContext id="multiple-netty-codecs-context" xmlns="http://camel.apache.org/schema/spring">
        <route>
            <from uri="direct:multiple-codec"/>
            <to uri="netty4:tcp://localhost:5150?encoders=#encoders&amp;sync=false"/>
        </route>
        <route>
            <from uri="netty4:tcp://localhost:5150?decoders=#length-decoder,#string-decoder&amp;sync=false"/>
            <to uri="mock:multiple-codec"/>
        </route>
    </camelContext>

Closing Channel When Complete

When acting as a server you sometimes want to close the channel when, for example, a client conversion is finished. You can do this by simply setting the endpoint option disconnect=true.
However you can also instruct Camel on a per message basis as follows. To instruct Camel to close the channel, you should add a header with the key CamelNettyCloseChannelWhenComplete set to a boolean true value. For instance, the example below will close the channel after it has written the bye message back to the client:
        from("netty4:tcp://localhost:8080").process(new Processor() {
            public void process(Exchange exchange) throws Exception {
                String body = exchange.getIn().getBody(String.class);
                exchange.getOut().setBody("Bye " + body);
                // some condition which determines if we should close
                if (close) {
                    exchange.getOut().setHeader(NettyConstants.NETTY_CLOSE_CHANNEL_WHEN_COMPLETE, true);
                }
            }
        });

Adding custom channel pipeline factories to gain complete control over a created pipeline

Custom channel pipelines provide complete control to the user over the handler/interceptor chain by inserting custom handler(s), encoder(s) & decoders without having to specify them in the Netty Endpoint URL in a very simple way.
In order to add a custom pipeline, a custom channel pipeline factory must be created and registered with the context via the context registry (JNDIRegistry,or the camel-spring ApplicationContextRegistry etc).
A custom pipeline factory must be constructed as follows
  • A Producer linked channel pipeline factory must extend the abstract class ClientInitializerFactory.
  • A Consumer linked channel pipeline factory must extend the abstract class ServerInitializerFactory.
  • The classes should override the initChannel() method in order to insert custom handler(s), encoder(s) and decoder(s). Not overriding the initChannel() method creates a pipeline with no handlers, encoders or decoders wired to the pipeline.
The example below shows how ServerInitializerFactory factory may be created

Example 103.1. Using server initializer factory

public class SampleServerInitializerFactory extends ServerInitializerFactory {
    private int maxLineSize = 1024;
 
     protected void initChannel(Channel ch) throws Exception {
        ChannelPipeline channelPipeline = ch.pipeline();
 
        channelPipeline.addLast("encoder-SD", new StringEncoder(CharsetUtil.UTF_8));
        channelPipeline.addLast("decoder-DELIM", new DelimiterBasedFrameDecoder(maxLineSize, true, Delimiters.lineDelimiter()));
        channelPipeline.addLast("decoder-SD", new StringDecoder(CharsetUtil.UTF_8));
        // here we add the default Camel ServerChannelHandler for the consumer, to allow Camel to route the message etc.
        channelPipeline.addLast("handler", new ServerChannelHandler(consumer));
    }
}
The custom server initializer factory can then be added to the registry and instantiated/utilized on a camel route in the following way:
Registry registry = camelContext.getRegistry();
ServerInitializerFactory factory = new TestServerInitializerFactory();
registry.bind("spf", factory);
context.addRoutes(new RouteBuilder() {
  public void configure() {
      String netty_ssl_endpoint =
         "netty4:tcp://localhost:5150?serverInitializerFactory=#spf"
      String return_string =
         "When You Go Home, Tell Them Of Us And Say,"
         + "For Your Tomorrow, We Gave Our Today.";
 
      from(netty_ssl_endpoint)
       .process(new Processor() {
          public void process(Exchange exchange) throws Exception {
            exchange.getOut().setBody(return_string);
          }
       }
  }
});

Reusing Netty boss and worker thread pools

Available as of Camel 2.12
Netty has two kind of thread pools: boss and worker. By default each Netty consumer and producer has their private thread pools. If you want to reuse these thread pools among multiple consumers or producers then the thread pools must be created and enlisted in the Registry.
For example using Spring XML we can create a shared worker thread pool using the NettyWorkerPoolBuilder with 2 worker threads as shown below:
  <!-- use the worker pool builder to create to help create the shared thread pool -->
  <bean id="poolBuilder" class="org.apache.camel.component.netty.NettyWorkerPoolBuilder">
    <property name="workerCount" value="2"/>
  </bean>

  <!-- the shared worker thread pool -->
  <bean id="sharedPool" class="org.jboss.netty.channel.socket.nio.WorkerPool"
        factory-bean="poolBuilder" factory-method="build" destroy-method="shutdown">
  </bean>
Tip
For boss thread pool there is a org.apache.camel.component.netty4.NettyServerBossPoolBuilder builder for Netty consumers, and a org.apache.camel.component.netty4.NettyClientBossPoolBuilder for the Netty produces.
Then in the Camel routes we can refer to this worker pools by configuring the workerPool option in the URI as shown below:
    <route>
      <from uri="netty4:tcp://localhost:5021?textline=true&amp;sync=true&amp;workerPool=#sharedPool&amp;usingExecutorService=false"/>
      <to uri="log:result"/>
      ...
    </route>
And if we have another route we can refer to the shared worker pool:
    <route>
      <from uri="netty4:tcp://localhost:5022?textline=true&amp;sync=true&amp;workerPool=#sharedPool&amp;usingExecutorService=false"/>
      <to uri="log:result"/>
      ...
    </route>
... and so forth.
Red Hat logoGithubRedditYoutubeTwitter

詳細情報

試用、購入および販売

コミュニティー

Red Hat ドキュメントについて

Red Hat をお使いのお客様が、信頼できるコンテンツが含まれている製品やサービスを活用することで、イノベーションを行い、目標を達成できるようにします。

多様性を受け入れるオープンソースの強化

Red Hat では、コード、ドキュメント、Web プロパティーにおける配慮に欠ける用語の置き換えに取り組んでいます。このような変更は、段階的に実施される予定です。詳細情報: Red Hat ブログ.

会社概要

Red Hat は、企業がコアとなるデータセンターからネットワークエッジに至るまで、各種プラットフォームや環境全体で作業を簡素化できるように、強化されたソリューションを提供しています。

© 2024 Red Hat, Inc.