このコンテンツは選択した言語では利用できません。

E.2. cxf-codegen-plugin

Abstract

Generates JAX-WS compliant Java code from a WSDL document

Overview

Basic example

The following POM extract shows a simple example of how to configure the Maven cxf-codegen-plugin to process the myService.wsdl WSDL file:

<plugin>
  <groupId>org.apache.cxf</groupId>
  <artifactId>cxf-codegen-plugin</artifactId>
  <version>3.1.5.redhat-630xxx</version>
  <executions>
    <execution>
      <id>generate-sources</id>
      <phase>generate-sources</phase>
      <configuration>
        <sourceRoot>target/generated/src/main/java</sourceRoot>
        <wsdlOptions>
          <wsdlOption>
            <wsdl>src/main/resources/wsdl/myService.wsdl</wsdl>
          </wsdlOption>
        </wsdlOptions>
      </configuration>
      <goals>
        <goal>wsdl2java</goal>
      </goals>
    </execution>
  </executions>
</plugin>

Basic configuration settings

In the preceding example, you can customize the following configuration settings

configuration/sourceRoot: Specifies the directory where the generated Java files will be stored. Default is target/generated-sources/cxf.
configuration/wsdlOptions/wsdlOption/wsdl: Specifies the location of the WSDL file.

Description

The wsdl2java task takes a WSDL document and generates fully annotated Java code from which to implement a service. The WSDL document must have a valid portType element, but it does not need to contain a binding element or a service element. Using the optional arguments you can customize the generated code.

WSDL options

At least one wsdlOptions element is required to configure the plug-in. The wsdlOptions element's wsdl child is required and specifies a WSDL document to be processed by the plug-in. In addition to the wsdl element, the wsdlOptions element can take a number of children that can customize how the WSDL document is processed.

Tip

More than one wsdlOptions element can be listed in the plug-in configuration. Each element configures a single WSDL document for processing.

Default options

The defaultOptions element is an optional element. It can be used to set options that are used across all of the specified WSDL documents.

Important

If an option is duplicated in the wsdlOptions element, the value in the wsdlOptions element takes precedent.

Specifying code generation options

To specify generic code generation options (corresponding to the switches supported by the Apache CXF wsdl2java command-line tool), you can add the extraargs element as a child of a wsdlOption element. For example, you can add the -impl option and the -verbose option as follows:

...
<configuration>
  <sourceRoot>target/generated/src/main/java</sourceRoot>
  <wsdlOptions>
    <wsdlOption>
      <wsdl>${basedir}/src/main/resources/wsdl/myService.wsdl</wsdl>
      <!-- you can set the options of wsdl2java command by using the <extraargs> -->
      <extraargs>
        <extraarg>-impl</extraarg>
        <extraarg>-verbose</extraarg>
      </extraargs>
    </wsdlOption>
  </wsdlOptions>
</configuration>
...

If a switch takes arguments, you can specify these using subsequent extraarg elements. For example, to specify the jibx data binding, you can configure the plug-in as follows:

...
<configuration>
  <sourceRoot>target/generated/src/main/java</sourceRoot>
  <wsdlOptions>
    <wsdlOption>
      <wsdl>${basedir}/src/main/resources/wsdl/myService.wsdl</wsdl>
      <extraargs>
        <extraarg>-databinding</extraarg>
        <extraarg>jibx</extraarg>
      </extraargs>
    </wsdlOption>
  </wsdlOptions>
</configuration>
...

Specifying binding files

To specify the location of one or more JAX-WS binding files, you can add the bindingFiles element as a child of wsdlOption—for example:

...
<configuration>
  <wsdlOptions>
    <wsdlOption>
      <wsdl>${basedir}/src/main/resources/wsdl/myService.wsdl</wsdl>
      <bindingFiles>
        <bindingFile>${basedir}/src/main/resources/wsdl/async_binding.xml</bindingFile>
      </bindingFiles>
    </wsdlOption>
  </wsdlOptions>
</configuration>
...

Generating code for a specific WSDL service

To specify the name of the WSDL service for which code is to be generated, you can add the serviceName element as a child of wsdlOption (the default behaviour is to generate code for every service in the WSDL document)—for example:

...
<configuration>
  <wsdlOptions>
    <wsdlOption>
      <wsdl>${basedir}/src/main/resources/wsdl/myService.wsdl</wsdl>
      <serviceName>MyWSDLService</serviceName>
    </wsdlOption>
  </wsdlOptions>
</configuration>
...

Generating code for multiple WSDL files

To generate code for multiple WSDL files, simply insert additional wsdlOption elements for the WSDL files. If you want to specify some common options that apply to all of the WSDL files, put the common options into the defaultOptions element as shown:

<configuration>
  <defaultOptions>
      <bindingFiles>
          <bindingFile>${basedir}/src/main/jaxb/bindings.xml</bindingFile>
      </bindingFiles>
      <noAddressBinding>true</noAddressBinding>
  </defaultOptions>
  <wsdlOptions>
      <wsdlOption>
          <wsdl>${basedir}/src/main/resources/wsdl/myService.wsdl</wsdl>
          <serviceName>MyWSDLService</serviceName>
      </wsdlOption>
      <wsdlOption>
          <wsdl>${basedir}/src/main/resources/wsdl/myOtherService.wsdl</wsdl>
          <serviceName>MyOtherWSDLService</serviceName>
      </wsdlOption>
  </wsdlOptions>
</configuration>

It is also possible to specify multiple WSDL files using wildcard matching. In this case, specify the directory containing the WSDL files using the wsdlRoot element and then select the required WSDL files using an include element, which supports wildcarding with the * character. For example, to select all of the WSDL files ending in Service.wsdl from the src/main/resources/wsdl root directory, you could configure the plug-in as follows:

<configuration>
  <defaultOptions>
      <bindingFiles>
          <bindingFile>${basedir}/src/main/jaxb/bindings.xml</bindingFile>
      </bindingFiles>
      <noAddressBinding>true</noAddressBinding>
  </defaultOptions>
  <wsdlRoot>${basedir}/src/main/resources/wsdl</wsdlRoot>
  <includes>
      <include>*Service.wsdl</include>
  </includes>
</configuration>

Downloading WSDL from a Maven repository

To download a WSDL file directly from a Maven repository, add a wsdlArtifact element as a child of the wsdlOption element and specify the coordinates of the Maven artifact, as follows:

...
<configuration>
  <wsdlOptions>
    <wsdlOption>
      <wsdlArtifact>
        <groupId>org.apache.pizza</groupId>
        <artifactId>PizzaService</artifactId>
        <version>1.0.0</version>
      </wsdlArtifact>
    </wsdlOption>
  </wsdlOptions>
</configuration>
...

Encoding

(Requires JAXB 2.2) To specify the character encoding (Charset) used for the generated Java files, add an encoding element as a child of the configuration element, as follows:

...
<configuration>
  <wsdlOptions>
    <wsdlOption>
      <wsdl>${basedir}/src/main/resources/wsdl/myService.wsdl</wsdl>
    </wsdlOption>
  </wsdlOptions>
  <encoding>UTF-8</encoding>
</configuration>
...

Forking a separate process

You can configure the codegen plug-in to fork a separate JVM for code generation, by adding the fork element as a child of the configuration element. The fork element can be set to one of the following values:

once: Fork a single new JVM to process all of the WSDL files specified in the codegen plug-in's configuration.
always: Fork a new JVM to process each WSDL file specified in the codegen plug-in's configuration.
false: (Default) Disables forking.

If the codegen plug-in is configured to fork a separate JVM (that is, the fork option is set to a non-false value), you can specify additional JVM arguments to the forked JVM through the additionalJvmArgs element. For example, the following fragment configures the codegen plug-in to fork a single JVM, which is restricted to access XML schemas from the local file system only (by setting the javax.xml.accessExternalSchema system property):

...
<configuration>
  <wsdlOptions>
    <wsdlOption>
      <wsdl>${basedir}/src/main/resources/wsdl/myService.wsdl</wsdl>
    </wsdlOption>
  </wsdlOptions>
  <fork>once</fork>
  <additionalJvmArgs>-Djavax.xml.accessExternalSchema=jar:file,file</additionalJvmArgs>
</configuration>
...

Options reference

The options used to manage the code generation process are reviewed in the following table.

Option	Interpretation
`-fe\|-frontend frontend`	Specifies the front end used by the code generator. Possible values are `jaxws`, `jaxws21`, and `cxf`. The `jaxws21` frontend is used to generate JAX-WS 2.1 compliant code. The `cxf` frontend, which can optionally be used instead of the `jaxws` frontend, provides an extra constructor for Service classes. This constructor conveniently enables you to specify the Bus instance for configuring the service. Default is `jaxws`.
`-db\|-databinding databinding`	Specifies the data binding used by the code generator. Possible values are: `jaxb`, `xmlbeans`, `sdo` (`sdo-static` and `sdo-dynamic`), and `jibx`. Default is `jaxb`.
`-wv wsdlVersion`	Specifies the WSDL version expected by the tool. Default is `1.1`.^[a]
`-p` [wsdlNamespace=]PackageName	Specifies zero, or more, package names to use for the generated code. Optionally specifies the WSDL namespace to package name mapping.
`-b bindingName`	Specifies one or more JAXWS or JAXB binding files. Use a separate `-b` flag for each binding file.
`-sn serviceName`	Specifies the name of the WSDL service for which code is to be generated. The default is to generate code for every service in the WSDL document.
`-reserveClass classname`	Used with `-autoNameResolution`, defines a class names for wsdl-to-java not to use when generating classes. Use this option multiple times for multiple classes.
`-catalog catalogUrl`	Specifies the URL of an XML catalog to use for resolving imported schemas and WSDL documents.
`-d output-directory`	Specifies the directory into which the generated code files are written.
`-compile`	Compiles generated Java files.
`-classdir complile-class-dir`	Specifies the directory into which the compiled class files are written.
`-clientjar jar-file-name`	Generates the JAR file that contains all the client classes and the WSDL. The specified `wsdlLocation` does not work when this option is specified.
`-client`	Generates starting point code for a client mainline.
`-server`	Generates starting point code for a server mainline.
`-impl`	Generates starting point code for an implementation object.
`-all`	Generates all starting point code: types, service proxy, service interface, server mainline, client mainline, implementation object, and an Ant `build.xml` file.
`-ant`	Generates the Ant `build.xml` file.
`-autoNameResolution`	Automatically resolve naming conflicts without requiring the use of binding customizations.
`-defaultValues`[=DefaultValueProvider]	Instructs the tool to generate default values for the generated client and the generated implementation. Optionally, you can also supply the name of the class used to generate the default values. By default, the `RandomValueProvider` class is used.
`-nexclude` schema-namespace[=java-packagename]	Ignore the specified WSDL schema namespace when generating code. This option may be specified multiple times. Also, optionally specifies the Java package name used by types described in the excluded namespace(s).
`-exsh` (`true`/`false`)	Enables or disables processing of extended soap header message binding. Default is `false`.
`-noTypes`	Turns off generating types.
`-dns` (`true`/`false`)	Enables or disables the loading of the default namespace package name mapping. Default is `true`.
`-dex` (`true`/`false`)	Enables or disables the loading of the default excludes namespace mapping. Default is `true`.
`-xjcargs`	Specifies a comma separated list of arguments to be passed to directly to the XJC when the JAXB data binding is being used. To get a list of all possible XJC arguments use the `-xjc-X`.
`-noAddressBinding`	Instructs the tool to use the Apache CXF proprietary WS-Addressing type instead of the JAX-WS 2.1 compliant mapping.
`-validate [=all\|basic\|none]`	Instructs the tool to validate the WSDL document before attempting to generate any code.
`-keep`	Instructs the tool to not overwrite any existing files.
`-wsdlLocation wsdlLocation`	Specifies the value of the `@WebService` annotation's wsdlLocation property.
`-v`	Displays the version number for the tool.
`-verbose\|-V`	Displays comments during the code generation process.
`-quiet`	Suppresses comments during the code generation process.
`-allowElementReferences[=true]`, `-aer[=true]`	If `true`, disregards the rule given in section 2.3.1.2(v) of the JAX-WS 2.2 specification disallowing element references when using wrapper-style mapping. Default is `false`.
`-asyncMethods[=method1,method2,...]`	List of subsequently generated Java class methods to allow for client-side asynchronous calls; similar to `enableAsyncMapping` in a JAX-WS binding file.
`-bareMethods[=method1,method2,...]`	List of subsequently generated Java class methods to have wrapper style (see below), similar to `enableWrapperStyle` in JAX-WS binding file.
`-mimeMethods[=method1,method2,...]`	List of subsequently generated Java class methods to enable mime:content mapping, similar to `enableMIMEContent` in JAX-WS binding file.
`-faultSerialVersionUID fault-serialVersionUID`	How to generate suid of fault exceptions. Possible values are: `NONE`, `TIMESTAMP`, `FQCN`, or a specific number. Default is `NONE`.
`-encoding encoding`	Specifies the Charset encoding to use when generating Java code.
`-exceptionSuper`	Superclass for fault beans generated from `wsdl:fault` elements (defaults to `java.lang.Exception`).
`-seiSuper interfaceName`	Specifies a base interface for the generated SEI interfaces. For example, this option can be used to add the Java 7 `AutoCloseable` interface as a super interface.
`-mark-generated`	Adds the @Generated annotation to the generated classes.
^[a] Currently, Apache CXF only provides WSDL 1.1 support for the code generator.