検索

このコンテンツは選択した言語では利用できません。

Chapter 3. Configuring HTTPS

download PDF

Abstract

This chapter describes how to configure HTTPS endpoints.

3.1. Authentication Alternatives

3.1.1. Target-Only Authentication

Overview

When an application is configured for target-only authentication, the target authenticates itself to the client but the client is not authentic to the target object, as shown in Figure 3.1, “Target Authentication Only”.

Figure 3.1. Target Authentication Only

authentication pattern for target authentication only

Security handshake

Prior to running the application, the client and server should be set up as follows:

During the security handshake, the server sends its certificate chain to the client (see Figure 3.1, “Target Authentication Only”). The client then searches its trusted CA lists to find a CA certificate that matches one of the CA certificates in the server’s certificate chain.

HTTPS example

On the client side, there are no policy settings required for target-only authentication. Simply configure your client without associating an X.509 certificate with the HTTPS port. You must provide the client with a list of trusted CA certificates, however (see Section 3.2, “Specifying Trusted CA Certificates”).

On the server side, in the server’s XML configuration file, make sure that the sec:clientAuthentication element does not require client authentication. This element can be omitted, in which case the default policy is to not require client authentication. However, if the sec:clientAuthentication element is present, it should be configured as follows:

<http:destination id="{Namespace}PortName.http-destination">
  <http:tlsServerParameters secureSocketProtocol="TLSv1">
    ...

    <sec:clientAuthentication want="false" required="false"/>
  </http:tlsServerParameters>
</http:destination>
Important

You must set secureSocketProtocol to TLSv1 on the server side, in order to protect against the Poodle vulnerability (CVE-2014-3566)

Where the want attribute is set to false (the default), specifying that the server does not request an X.509 certificate from the client during a TLS handshake. The required attribute is also set to false (the default), specifying that the absence of a client certificate does not trigger an exception during the TLS handshake.

Note

The want attribute can be set either to true or to false. If set to true, the want setting causes the server to request a client certificate during the TLS handshake, but no exception is raised for clients lacking a certificate, so long as the required attribute is set to false.

It is also necessary to associate an X.509 certificate with the server’s HTTPS port (see Section 3.3, “Specifying an Application’s Own Certificate” ) and to provide the server with a list of trusted CA certificates (see Section 3.2, “Specifying Trusted CA Certificates” ).

Note

The choice of cipher suite can potentially affect whether or not target-only authentication is supported (see Chapter 4, Configuring HTTPS Cipher Suites).

3.1.2. Mutual Authentication

Overview

When an application is configured for mutual authentication, the target authenticates itself to the client and the client authenticates itself to the target. This scenario is illustrated in Figure 3.2, “Mutual Authentication” . In this case, the server and the client each require an X.509 certificate for the security handshake.

Figure 3.2. Mutual Authentication

both client and server authenticate with the other party

Security handshake

Prior to running the application, the client and server must be set up as follows:

During the TLS handshake, the server sends its certificate chain to the client, and the client sends its certificate chain to the server—see Figure 3.1, “Target Authentication Only” .

HTTPS example

On the client side, there are no policy settings required for mutual authentication. Simply associate an X.509 certificate with the client’s HTTPS port (see Section 3.3, “Specifying an Application’s Own Certificate”). You also need to provide the client with a list of trusted CA certificates (see Section 3.2, “Specifying Trusted CA Certificates”).

On the server side, in the server’s XML configuration file, make sure that the sec:clientAuthentication element is configured to require client authentication. For example:

<http:destination id="{Namespace}PortName.http-destination">
  <http:tlsServerParameters secureSocketProtocol="TLSv1">
    ...
    <sec:clientAuthentication want="true" required="true"/>
  </http:tlsServerParameters>
</http:destination>
Important

You must set secureSocketProtocol to TLSv1 on the server side, in order to protect against the Poodle vulnerability (CVE-2014-3566)

Where the want attribute is set to true, specifying that the server requests an X.509 certificate from the client during a TLS handshake. The required attribute is also set to true, specifying that the absence of a client certificate triggers an exception during the TLS handshake.

It is also necessary to associate an X.509 certificate with the server’s HTTPS port (see Section 3.3, “Specifying an Application’s Own Certificate”) and to provide the server with a list of trusted CA certificates (see Section 3.2, “Specifying Trusted CA Certificates”).

Note

The choice of cipher suite can potentially affect whether or not mutual authentication is supported (see Chapter 4, Configuring HTTPS Cipher Suites).

3.2. Specifying Trusted CA Certificates

3.2.1. When to Deploy Trusted CA Certificates

Overview

When an application receives an X.509 certificate during an SSL/TLS handshake, the application decides whether or not to trust the received certificate by checking whether the issuer CA is one of a pre-defined set of trusted CA certificates. If the received X.509 certificate is validly signed by one of the application’s trusted CA certificates, the certificate is deemed trustworthy; otherwise, it is rejected.

Which applications need to specify trusted CA certificates?

Any application that is likely to receive an X.509 certificate as part of an HTTPS handshake must specify a list of trusted CA certificates. For example, this includes the following types of application:

  • All HTTPS clients.
  • Any HTTPS servers that support mutual authentication.

3.2.2. Specifying Trusted CA Certificates for HTTPS

CA certificate format

CA certificates must be provided in Java keystore format.

CA certificate deployment in the Apache CXF configuration file

To deploy one or more trusted root CAs for the HTTPS transport, perform the following steps:

  1. Assemble the collection of trusted CA certificates that you want to deploy. The trusted CA certificates can be obtained from public CAs or private CAs (for details of how to generate your own CA certificates, see Section 2.5, “Creating Your Own Certificates”). The trusted CA certificates can be in any format that is compatible with the Java keystore utility; for example, PEM format. All you need are the certificates themselves—the private keys and passwords are not required.
  2. Given a CA certificate, cacert.pem, in PEM format, you can add the certificate to a JKS truststore (or create a new truststore) by entering the following command:

    keytool -import -file cacert.pem -alias CAAlias -keystore truststore.jks -storepass StorePass

    Where CAAlias is a convenient tag that enables you to access this particular CA certificate using the keytool utility. The file, truststore.jks, is a keystore file containing CA certificates—if this file does not already exist, the keytool utility creates one. The StorePass password provides access to the keystore file, truststore.jks.

  3. Repeat step 2 as necessary, to add all of the CA certificates to the truststore file, truststore.jks.
  4. Edit the relevant XML configuration files to specify the location of the truststore file. You must include the sec:trustManagers element in the configuration of the relevant HTTPS ports.

    For example, you can configure a client port as follows:

    <!-- Client port configuration -->
    <http:conduit id="{Namespace}PortName.http-conduit">
      <http:tlsClientParameters>
        ...
        <sec:trustManagers>
          <sec:keyStore type="JKS"
                        password="StorePass"
                        file="certs/truststore.jks"/>
        </sec:trustManagers>
        ...
      </http:tlsClientParameters>
    </http:conduit>

    Where the type attribute specifes that the truststore uses the JKS keystore implementation and StorePass is the password needed to access the truststore.jks keystore.

    Configure a server port as follows:

    <!-- Server port configuration -->
    <http:destination id="{Namespace}PortName.http-destination">
      <http:tlsServerParameters secureSocketProtocol="TLSv1">
        ...
        <sec:trustManagers>
          <sec:keyStore type="JKS"
                        password="StorePass"
                        file="certs/truststore.jks"/>
        </sec:trustManagers>
        ...
      </http:tlsServerParameters>
    </http:destination>
    Important

    You must set secureSocketProtocol to TLSv1 on the server side, in order to protect against the Poodle vulnerability (CVE-2014-3566)

    Warning

    The directory containing the truststores (for example, X509Deploy/truststores/) should be a secure directory (that is, writable only by the administrator).

3.3. Specifying an Application’s Own Certificate

3.3.1. Deploying Own Certificate for HTTPS

Overview

When working with the HTTPS transport the application’s certificate is deployed using the XML configuration file.

Procedure

To deploy an application’s own certificate for the HTTPS transport, perform the following steps:

  1. Obtain an application certificate in Java keystore format, CertName.jks. For instructions on how to create a certificate in Java keystore format, see Section 2.5.3, “Use the CA to Create Signed Certificates in a Java Keystore”.

    Note

    Some HTTPS clients (for example, Web browsers) perform a URL integrity check, which requires a certificate’s identity to match the hostname on which the server is deployed. See Section 2.4, “Special Requirements on HTTPS Certificates” for details.

  2. Copy the certificate’s keystore, CertName.jks, to the certificates directory on the deployment host; for example, X509Deploy/certs.

    The certificates directory should be a secure directory that is writable only by administrators and other privileged users.

  3. Edit the relevant XML configuration file to specify the location of the certificate keystore, CertName.jks. You must include the sec:keyManagers element in the configuration of the relevant HTTPS ports.

    For example, you can configure a client port as follows:

    <http:conduit id="{Namespace}PortName.http-conduit">
      <http:tlsClientParameters>
        ...
        <sec:keyManagers keyPassword="CertPassword">
          <sec:keyStore type="JKS"
                        password="KeystorePassword"
                        file="certs/CertName.jks"/>
        </sec:keyManagers>
        ...
      </http:tlsClientParameters>
    </http:conduit>

    Where the keyPassword attribute specifies the password needed to decrypt the certificate’s private key (that is, CertPassword), the type attribute specifes that the truststore uses the JKS keystore implementation, and the password attribute specifies the password required to access the CertName.jks keystore (that is, KeystorePassword).

    Configure a server port as follows:

    <http:destination id="{Namespace}PortName.http-destination">
      <http:tlsServerParameters secureSocketProtocol="TLSv1">
        ...
        <sec:keyManagers keyPassword="CertPassword">
          <sec:keyStore type="JKS"
                        password="KeystorePassword"
                        file="certs/CertName.jks"/>
        </sec:keyManagers>
        ...
      </http:tlsServerParameters>
    </http:destination>
    Important

    You must set secureSocketProtocol to TLSv1 on the server side, in order to protect against the Poodle vulnerability (CVE-2014-3566)

    Warning

    The directory containing the application certificates (for example, X509Deploy/certs/) should be a secure directory (that is, readable and writable only by the administrator).

    Warning

    The directory containing the XML configuration file should be a secure directory (that is, readable and writable only by the administrator), because the configuration file contains passwords in plain text.

Red Hat logoGithubRedditYoutubeTwitter

詳細情報

試用、購入および販売

コミュニティー

Red Hat ドキュメントについて

Red Hat をお使いのお客様が、信頼できるコンテンツが含まれている製品やサービスを活用することで、イノベーションを行い、目標を達成できるようにします。

多様性を受け入れるオープンソースの強化

Red Hat では、コード、ドキュメント、Web プロパティーにおける配慮に欠ける用語の置き換えに取り組んでいます。このような変更は、段階的に実施される予定です。詳細情報: Red Hat ブログ.

会社概要

Red Hat は、企業がコアとなるデータセンターからネットワークエッジに至るまで、各種プラットフォームや環境全体で作業を簡素化できるように、強化されたソリューションを提供しています。

© 2024 Red Hat, Inc.