検索

このコンテンツは選択した言語では利用できません。

Chapter 16. Using Remote Connections to Manage a Container

download PDF

It does not always make sense to use a local console to manage a container. Red Hat Fuse has a number of ways of remotely managing a container. You can use a remote container’s command console or start a remote client.

16.1. Configuring a Container for Remote Access

16.1.1. Overview

When you start the Red Hat Fuse runtime in default mode or in Section 2.1.3, “Launching the runtime in server mode”, it enables a remote console that can be accessed over SSH from any other Fuse console. The remote console provides all of the functionality of the local console and allows a remote user complete control over the container and the services running inside of it.

Note

When run in Section 2.1.4, “Launching the runtime in client mode” the Fuse runtime disables the remote console.

16.1.2. Configuring a standalone container for remote access

The SSH hostname and port number are configured in the INSTALL_DIR/etc/org.apache.karaf.shell.cfg configuration file. Changing the Port for Remote Access shows a sample configuration that changes the port used to 8102.

Changing the Port for Remote Access

sshPort=8102
sshHost=0.0.0.0

16.2. Connecting and Disconnecting Remotely

There are two alternative ways of connecting to a remote container. If you are already running an Red Hat Fuse command shell, you can invoke a console command to connect to the remote container. Alternatively, you can run a utility directly on the command-line to connect to the remote container.

16.2.1. Connecting to a Standalone Container from a Remote Container

16.2.1.1. Overview

Any container’s command console can be used to access a remote container. Using SSH, the local container’s console connects to the remote container and functions as a command console for the remote container.

16.2.1.2. Using the ssh:ssh console command

You connect to a remote container’s console using the ssh:ssh console command.

ssh:ssh Command Syntax

ssh:ssh -l username -P password -p port hostname

-l
The username used to connect to the remote container. Use valid JAAS login credentials that have admin privileges.
-P
The password used to connect to the remote container.
-p
The SSH port used to access the desired container’s remote console. By default this value is 8101. See Section 16.1.2, “Configuring a standalone container for remote access” for details on changing the port number.
hostname
The hostname of the machine that the remote container is running on. See Section 16.1.2, “Configuring a standalone container for remote access” for details on changing the hostname.
Warning

We recommend that you customize the username and password in the etc/users.properties file.

Note

If your remote container is deployed on an Oracle VM Server for SPARC instance, it is likely that the default SSH port value, 8101, is already occupied by the Logical Domains Manager daemon. In this case, you will need to reconfigure the container’s SSH port, as described in Section 16.1.2, “Configuring a standalone container for remote access”.

To confirm that you have connected to the correct container, type shell:info at the Karaf console prompt, which returns information about the currently connected instance.

16.2.1.3. Disconnecting from a remote console

To disconnect from a remote console, enter logout or press Ctrl+D at the prompt.

You will be disconnected from the remote container and the console will once again manage the local container.

16.2.2. Connecting to a Container Using the Client Command-Line Utility

16.2.2.1. Using the remote client

The remote client allows you to securely connect to a remote Red Hat Fuse container without having to launch a full Fuse container locally.

For example, to quickly connect to a Fuse instance running in server mode on the same machine, open a command prompt and run the client[.bat] script (which is located in the InstallDir/bin directory), as follows:

client

More usually, you would provide a hostname, port, username, and password to connect to a remote instance. If you were using the client within a larger script, for example in a test suite, you could append console commands as follows:

client -a 8101 -h hostname -u username -p password shell:info

Alternatively, if you omit the -p option, you are prompted to enter a password.

For a standalone container, use any valid JAAS user credentials that have admin privileges.

To display the available options for the client, type:

client --help

Karaf Client Help

Apache Felix Karaf client
  -a [port]     specify the port to connect to
  -h [host]     specify the host to connect to
  -u [user]     specify the user name
  -p [password] specify the password
  --help        shows this help message
  -v            raise verbosity
  -r [attempts] retry connection establishment (up to attempts times)
  -d [delay]    intra-retry delay (defaults to 2 seconds)
  [commands]    commands to run
If no commands are specified, the client will be put in an interactive mode

16.2.2.2. Remote client default credentials

You might be surprised to find that you can log into your Karaf container using bin/client, without supplying any credentials. This is because the remote client program is pre-configured to use default credentials. If no credentials are specified, the remote client automatically tries to use the following default credentials (in sequence):

  • Default SSH key — tries to login using the default Apache Karaf SSH key. The corresponding configuration entry that would allow this login to succeed is commented out by default in the etc/keys.properties file.
  • Default username/password credentials — tries to login using the admin/admin combination of username and password. The corresponding configuration entry that would allow this login to succeed is commented out by default in the etc/users.properties file.

Hence, if you create a new user in the Karaf container simply by uncommenting the default admin/admin credentials in users.properties, you will find that the bin/client utility can log in without supplying credentials.

Important

For your security, Fuse has disabled the default credentials (by commenting out) when the Karaf container is first installed. If you simply uncomment these default credentials, however, without changing the default password or SSH public key, you will open up a security hole in your Karaf container. You must never do this in a production environment. If you find that you can login to your container using bin/client without supplying credentials, this shows that your container is insecure and you must take steps to fix this in a production environment.

16.2.2.3. Disconnecting from a remote client console

If you used the remote client to open a remote console, as opposed to using it to pass a command, you will need to disconnect from it. To disconnect from the remote client’s console, enter logout or press Ctrl-D at the prompt.

The client will disconnect and exit.

16.2.3. Connecting to a Container Using the SSH Command-Line Utility

16.2.3.1. Overview

You can also use the ssh command-line utility (a standard utility on UNIX-like operating systems) to log in to the Red Hat Fuse container, where the authentication mechanism is based on public key encryption (the public key must first be installed in the container). For example, given that the container is configured to listen on TCP port 8101, you could log in as follows:

ssh -p 8101 jdoe@localhost
Important

Key-based login is currently supported only on standalone containers, not on Fabric containers.

16.2.3.2. Prerequisites

To use key-based SSH login, the following prerequisites must be satisfied:

16.2.3.3. Default key location

The ssh command automatically looks for the private key in the default key location. It is recommended that you install your key in the default location, because it saves you the trouble of specifying the location explicitly.

On a *NIX operating system, the default locations for an RSA key pair are:

~/.ssh/id_rsa
~/.ssh/id_rsa.pub

On a Windows operating system, the default locations for an RSA key pair are:

C:\Documents and Settings\Username\.ssh\id_rsa
C:\Documents and Settings\Username\.ssh\id_rsa.pub
Note

Red Hat Fuse supports only RSA keys. DSA keys do not work.

16.2.3.4. Creating a new SSH key pair

Generate an RSA key pair using the ssh-keygen utility. Open a new command prompt and enter the following command:

ssh-keygen -t rsa -b 2048

The preceding command generates an RSA key with a key length of 2048 bits. You will then be prompted to specify the file name for the key pair:

Generating public/private rsa key pair.
Enter file in which to save the key (/Users/Username/.ssh/id_rsa):

Type return to save the key pair in the default location. You will then be prompted for a pass phrase:

Enter passphrase (empty for no passphrase):

You can optionally enter a pass phrase here or type return twice to select no pass phrase.

Note

If you want to use the same key pair for running Fabric console commands, it is recommended that you select no pass phrase, because Fabric does not support using encrypted private keys.

16.2.3.5. Installing the SSH public key in the container

To use the SSH key pair for logging into the Red Hat JBoss Fuse container, you must install the SSH public key in the container by creating a new user entry in the INSTALL_DIR/etc/keys.properties file. Each user entry in this file appears on a single line, in the following format:

Username=PublicKey,Role1,Role2,...

For example, given that your public key file, ~/.ssh/id_rsa.pub, has the following contents:

ssh-rsa AAAAB3NzaC1kc3MAAACBAP1/U4EddRIpUt9KnC7s5Of2EbdSPO9EAMMeP4C2USZpRV1AIlH7WT2NWPq/xfW6MPbLm1Vs14E7
gB00b/JmYLdrmVClpJ+f6AR7ECLCT7up1/63xhv4O1fnfqimFQ8E+4P208UewwI1VBNaFpEy9nXzrith1yrv8iIDGZ3RSAHHAAAAFQCX
YFCPFSMLzLKSuYKi64QL8Fgc9QAAAnEA9+GghdabPd7LvKtcNrhXuXmUr7v6OuqC+VdMCz0HgmdRWVeOutRZT+ZxBxCBgLRJFnEj6Ewo
FhO3zwkyjMim4TwWeotifI0o4KOuHiuzpnWRbqN/C/ohNWLx+2J6ASQ7zKTxvqhRkImog9/hWuWfBpKLZl6Ae1UlZAFMO/7PSSoAAACB
AKKSU2PFl/qOLxIwmBZPPIcJshVe7bVUpFvyl3BbJDow8rXfskl8wO63OzP/qLmcJM0+JbcRU/53Jj7uyk31drV2qxhIOsLDC9dGCWj4
7Y7TyhPdXh/0dthTRBy6bqGtRPxGa7gJov1xm/UuYYXPIUR/3x9MAZvZ5xvE0kYXO+rx jdoe@doemachine.local

You can create the jdoe user with the admin role by adding the following entry to the InstallDir/etc/keys.properties file (on a single line):

jdoe=AAAAB3NzaC1kc3MAAACBAP1/U4EddRIpUt9KnC7s5Of2EbdSPO9EAMMeP4C2USZpRV1AIlH7WT2NWPq/xfW6MPbLm1Vs14E7
gB00b/JmYLdrmVClpJ+f6AR7ECLCT7up1/63xhv4O1fnfqimFQ8E+4P208UewwI1VBNaFpEy9nXzrith1yrv8iIDGZ3RSAHHAAAAFQCX
YFCPFSMLzLKSuYKi64QL8Fgc9QAAAnEA9+GghdabPd7LvKtcNrhXuXmUr7v6OuqC+VdMCz0HgmdRWVeOutRZT+ZxBxCBgLRJFnEj6Ewo
FhO3zwkyjMim4TwWeotifI0o4KOuHiuzpnWRbqN/C/ohNWLx+2J6ASQ7zKTxvqhRkImog9/hWuWfBpKLZl6Ae1UlZAFMO/7PSSoAAACB
AKKSU2PFl/qOLxIwmBZPPIcJshVe7bVUpFvyl3BbJDow8rXfskl8wO63OzP/qLmcJM0+JbcRU/53Jj7uyk31drV2qxhIOsLDC9dGCWj4
7Y7TyhPdXh/0dthTRBy6bqGtRPxGa7gJov1xm/UuYYXPIUR/3x9MAZvZ5xvE0kYXO+rx,admin
Important

Do not insert the entire contents of the id_rsa.pub file here. Insert just the block of symbols which represents the public key itself.

16.2.3.6. Checking that public key authentication is supported

After starting the container, you can check whether public key authentication is supported by running the jaas:realms console command, as follows:

karaf@root()> jaas:realms
Index │ Realm Name │ Login Module Class Name
──────┼────────────┼─────────────────────────────────────────────────────-
1 │ karaf │ org.apache.karaf.jaas.modules.properties.PropertiesLoginModule
2 │ karaf │ org.apache.karaf.jaas.modules.publickey.PublickeyLoginModule
3 │ karaf │ org.apache.karaf.jaas.modules.audit.FileAuditLoginModule
4 │ karaf │ org.apache.karaf.jaas.modules.audit.LogAuditLoginModule
5 │ karaf │ org.apache.karaf.jaas.modules.audit.EventAdminAuditLoginModule
karaf@root()>

You should see that the PublickeyLoginModule is installed. With this configuration you can log in to the container using either username/password credentials or public key credentials.

16.2.3.7. Adding the ssh Role to etc/keys.properties

The admingroup defined in etc/keys.properties must include the ssh role, as shown in the following example:

#
# For security reason, the default auto-signed key is disabled.
# The user guide describes how to generate/update the key.
#
#karaf=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,_g_:admingroup
_g_\:admingroup = group,admin,manager,viewer,systembundles,ssh

If the ssh role is not included in the definition of admingroup, you must edit the etc/keys.properties and add the ssh role.

16.2.3.8. Logging in using key-based SSH

You are now ready to login to the container using the key-based SSH utility. For example:

$ ssh -p 8101 jdoe@localhost
____          _   _   _       _     _____
|  _ \ ___  __| | | | | | __ _| |_  |  ___|   _ ___  ___
| |_) / _ \/ _` | | |_| |/ _` | __| | |_ | | | / __|/ _ \
|  _ <  __/ (_| | |  _  | (_| | |_  |  _|| |_| \__ \  __/
|_| \_\___|\__,_| |_| |_|\__,_|\__| |_|   \__,_|___/___|

  Fuse (7.x.x.fuse-xxxxxx-redhat-xxxxx)
  http://www.redhat.com/products/jbossenterprisemiddleware/fuse/

Hit '<tab>' for a list of available commands
and '[cmd] --help' for help on a specific command.

Open a browser to http://localhost:8181/hawtio to access the management console

Hit '<ctrl-d>' or 'shutdown' to shutdown Red Hat Fuse.

karaf@root()>
Note

If you are using an encrypted private key, the ssh utility will prompt you to enter the pass phrase.

16.3. Stopping a Remote Container

If you have connected to a remote console using the ssh:ssh command or the remote client, you can stop the remote instance using the osgi:shutdown command.

Note

Pressing Ctrl+D in a remote console simply closes the remote connection and returns you to the local shell.

Red Hat logoGithubRedditYoutubeTwitter

詳細情報

試用、購入および販売

コミュニティー

Red Hat ドキュメントについて

Red Hat をお使いのお客様が、信頼できるコンテンツが含まれている製品やサービスを活用することで、イノベーションを行い、目標を達成できるようにします。

多様性を受け入れるオープンソースの強化

Red Hat では、コード、ドキュメント、Web プロパティーにおける配慮に欠ける用語の置き換えに取り組んでいます。このような変更は、段階的に実施される予定です。詳細情報: Red Hat ブログ.

会社概要

Red Hat は、企業がコアとなるデータセンターからネットワークエッジに至るまで、各種プラットフォームや環境全体で作業を簡素化できるように、強化されたソリューションを提供しています。

© 2024 Red Hat, Inc.