Red Hat Summit Red Hat Summitサポートコンソール開発者トライアルの開始お問い合わせ

このコンテンツは選択した言語では利用できません。

2.3. Installing Red Hat Gluster Storage Server on Red Hat Enterprise Linux (Layered Install)

Layered install involves installing Red Hat Gluster Storage over Red Hat Enterprise Linux

Important

  • It is recommended to create a separate /var partition that is large enough (50GB - 100GB) for log files, geo-replication related miscellaneous files, and other files.

  1. Perform a base install of Red Hat Enterprise Linux Server

    Red Hat Gluster Storage requires a kernel version of 2.6.32-431.17.1 or higher. This is available in Red Hat Enterprise Linux 6.5 and higher, and in Red Hat Enterprise Linux 7.

  2. Register the System with Subscription Manager

    Run the following command and enter your Red Hat Network user name and password to register the system with the Red Hat Network: 
    # subscription-manager register
    Copy to Clipboard Toggle word wrap

  3. Identify Available Entitlement Pools

    Run the following commands to find entitlement pools containing the repositories required to install Red Hat Gluster Storage: 
    # subscription-manager list --available
    Copy to Clipboard Toggle word wrap

  4. Attach Entitlement Pools to the System

    Use the pool identifiers located in the previous step to attach the Red Hat Enterprise Linux Server and Red Hat Gluster Storage entitlements to the system. Run the following command to attach the entitlements: 
    # subscription-manager attach --pool=[POOLID]
    Copy to Clipboard Toggle word wrap
    For example: 
    # subscription-manager attach --pool=8a85f9814999f69101499c05aa706e47
    Copy to Clipboard Toggle word wrap

  5. Enable the Required Channels

    For Red Hat Gluster Storage 3.3 on Red Hat Enterprise Linux 6.7 and later

    1. Run the following commands to enable the repositories required to install Red Hat Gluster Storage: 
      # subscription-manager repos --enable=rhel-6-server-rpms
# subscription-manager repos --enable=rhel-scalefs-for-rhel-6-server-rpms
# subscription-manager repos --enable=rhs-3-for-rhel-6-server-rpms
      Copy to Clipboard Toggle word wrap
    2. For Red Hat Gluster Storage 3.0.4 and later, if you require Samba, then enable the following repository: 
      # subscription-manager repos --enable=rh-gluster-3-samba-for-rhel-6-server-rpms
      Copy to Clipboard Toggle word wrap
      For more information about installing Samba, see Chapter 3, Deploying Samba on Red Hat Gluster Storage
    3. NFS-Ganesha is not supported on Red Hat Enterprise Linux 6 based installations.
    For Red Hat Gluster Storage 3.3 on Red Hat Enterprise Linux 7.x

    1. Run the following commands to enable the repositories required to install Red Hat Gluster Storage 
      # subscription-manager repos --enable=rhel-7-server-rpms
# subscription-manager repos --enable=rh-gluster-3-for-rhel-7-server-rpms
      Copy to Clipboard Toggle word wrap
    2. For Red Hat Gluster Storage 3.0.4 and later, if you require Samba, then enable the following repository: 
      # subscription-manager repos --enable=rh-gluster-3-samba-for-rhel-7-server-rpms
      Copy to Clipboard Toggle word wrap
      For more information about installing Samba, see Chapter 3, Deploying Samba on Red Hat Gluster Storage
    3. If you require NFS-Ganesha then enable the following repositories: 
      # subscription-manager repos --enable=rh-gluster-3-nfs-for-rhel-7-server-rpms --enable=rhel-ha-for-rhel-7-server-rpms
      Copy to Clipboard Toggle word wrap
      For more information about installing NFS-Ganesha, see Chapter 4, Deploying NFS-Ganesha on Red Hat Gluster Storage.

  6. Verify if the Channels are Enabled

    Run the following command to verify if the channels are enabled: 
    # yum repolist
    Copy to Clipboard Toggle word wrap

  7. Kernel Version Requirement

    Red Hat Gluster Storage requires the kernel-2.6.32-431.17.1.el6 version or higher to be used on the system. Verify the installed and running kernel versions by running the following command: 
    # rpm -q kernel
kernel-2.6.32-431.el6.x86_64
kernel-2.6.32-431.17.1.el6.x86_64
    Copy to Clipboard Toggle word wrap 
    # uname -r
2.6.32-431.17.1.el6.x86_64
    Copy to Clipboard Toggle word wrap

  8. Update all packages

    Ensure that all packages are up to date by running the following command. 
    # yum update
    Copy to Clipboard Toggle word wrap

    Important

    If any kernel packages are updated, reboot the system with the following command. 
    # shutdown -r now
    Copy to Clipboard Toggle word wrap

  9. Install Red Hat Gluster Storage

    Run the following command to install Red Hat Gluster Storage: 
    # yum install redhat-storage-server
    Copy to Clipboard Toggle word wrap
    1. For Red Hat Gluster Storage 3.0.4 and later, if you require Samba, then execute the following command to install Samba: 
      # yum groupinstall RH-Gluster-Samba-Server
      Copy to Clipboard Toggle word wrap
    2. If you require Samba Active Directory integration with gluster, execute the following command: 
      # yum groupinstall RH-Gluster-AD-Integration
      Copy to Clipboard Toggle word wrap
    3. To install NFS-Ganesha, see Chapter 4, Deploying NFS-Ganesha on Red Hat Gluster Storage

  10. Reboot

    Reboot the system.
トップに戻る
Red Hat logoGithubredditYoutubeTwitter

詳細情報

試用、購入および販売

コミュニティー

Red Hat ドキュメントについて

Red Hat をお使いのお客様が、信頼できるコンテンツが含まれている製品やサービスを活用することで、イノベーションを行い、目標を達成できるようにします。 最新の更新を見る.

多様性を受け入れるオープンソースの強化

Red Hat では、コード、ドキュメント、Web プロパティーにおける配慮に欠ける用語の置き換えに取り組んでいます。このような変更は、段階的に実施される予定です。詳細情報: Red Hat ブログ.

会社概要

Red Hat は、企業がコアとなるデータセンターからネットワークエッジに至るまで、各種プラットフォームや環境全体で作業を簡素化できるように、強化されたソリューションを提供しています。

Theme

© 2025 Red Hat