Red Hat Summit Red Hat Summitサポートコンソール開発者トライアルの開始お問い合わせ

このコンテンツは選択した言語では利用できません。

Chapter 4. Adding an OpenStack Infrastructure Provider

After you have deployed your CloudForms Management Engine appliance, you can begin managing your OpenStack environment by adding it as an OpenStack Infrastructure provider. Supply the details of the admin account to get access to the resources in the admin tenant:

  1. Navigate to Infrastructure > Providers.
  2. Click Configuration (Configuration), then click Add a New Infrastructure Provider (Add a New Infrastructure Provider).
  3. Enter the Name of the provider to add. The Name is how the device is labeled in the console.
  4. Select OpenStack Platform Director from the Type list.

  5. Enter the Host Name or IP address(IPv4 or IPv6) of the provider.

    Important

    The Host Name must use a unique fully-qualified domain name (FQDN).

  6. Select the API Version of the keystone service from the list. The default is Keystone v2.

    Important

    If the keystone service is configured to use SSL, you must enter the keystone SSL port.

  7. Select the appropriate Zone for the provider. By default, the zone is set to default.

  8. In the Credentials area, under Default, provide the login credentials required for the OpenStack Infrastructure administrative user:

    • Enter the user name in the Username field.
    • Enter the password in the Password field.
    • Confirm the user password in the Confirm Password field.
    • Click Validate to confirm that the CloudForms Management Engine can connect to the OpenStack Infrastructure instance using the user name and password.

  9. Under AMQP, provide the login credentials required for the Advanced Message Queuing Protocol messaging service:

    • Enter the administrative user name in the Username field.
    • Enter the user password in the Password field.
    • Confirm the user password in the Confirm Password field.
    • Click Validate to confirm CFME can connect to the messaging service.

  10. Under RSA key pair, provide the user name and private key required to connect via SSH to all hosts in the provider:

    • Enter the administrative user name in the Username field.
    • Enter the private key from the machine on which OpenStack was deployed in the Private Key field.
  11. Click Add.
Note

CloudForms Management Engine requires that the adminURL endpoint for all OpenStack services be on a non-private network. As a result, you should assign the adminURL endpoint an IP address of something other than 192.168.x.x. The adminURL endpoint must be accessible to the CFME Appliance that is responsible for collecting inventory and gathering metrics from the OpenStack environment. In addition, make sure that all the keystone endpoints are accessible, otherwise the refresh process will fail.

4.1. Configuring Red Hat CloudForms to Receive Events
リンクのコピー

To allow Red Hat CloudForms to receive events from a Red Hat OpenStack Platform environment, you must configure the notification_driver option for the Compute service and Orchestration service in that environment.

  1. Edit /etc/heat/heat.conf, and specify the following options: 

    notification_driver=glance.openstack.common.notifier.rpc_notifier
notification_topics=notifications
    Copy to Clipboard Toggle word wrap

  2. Edit /etc/nova/nova.conf, and specify the following options: 

    notification_driver=messaging
notification_topics=notifications
    Copy to Clipboard Toggle word wrap

  3. Restart the Compute service and Orchestration services: 

    # systemctl restart openstack-heat-api.service \
  openstack-heat-api-cfn.service \
  openstack-heat-engine.service \
  openstack-heat-api-cloudwatch.service
# systemctl restart openstack-nova-compute.service
    Copy to Clipboard Toggle word wrap

4.2. Configuring the Telemetry Service to Store Events
リンクのコピー

By default, the Telemetry service does not store events emitted by other services in a Red Hat OpenStack Platform environment. The following procedure outlines how to enable the Telemetry service to store such events so that they are exposed to Red Hat CloudForms when a Red Hat OpenStack Platform environment is added as an infrastructure provider.

  1. On the director node, edit undercloud.conf, and set store_events to true.

  2. Create an environment file called ceilometer.yaml, and add the following contents: 

    parameter_defaults:
  CeilometerStoreEvents: true
    Copy to Clipboard Toggle word wrap

  3. Add the environment file to the overcloud deploy command: 

    # openstack overcloud deploy --templates -e ~/ceilometer.yaml
    Copy to Clipboard Toggle word wrap
トップに戻る
Red Hat logoGithubredditYoutubeTwitter

詳細情報

試用、購入および販売

コミュニティー

Red Hat ドキュメントについて

Red Hat をお使いのお客様が、信頼できるコンテンツが含まれている製品やサービスを活用することで、イノベーションを行い、目標を達成できるようにします。 最新の更新を見る.

多様性を受け入れるオープンソースの強化

Red Hat では、コード、ドキュメント、Web プロパティーにおける配慮に欠ける用語の置き換えに取り組んでいます。このような変更は、段階的に実施される予定です。詳細情報: Red Hat ブログ.

会社概要

Red Hat は、企業がコアとなるデータセンターからネットワークエッジに至るまで、各種プラットフォームや環境全体で作業を簡素化できるように、強化されたソリューションを提供しています。

Theme

© 2025 Red Hat