Red Hat Summit Red Hat Summitサポートコンソール開発者トライアルの開始お問い合わせ

このコンテンツは選択した言語では利用できません。

Chapter 3. Upgrading a geo-replication deployment of standalone Red Hat Quay

Use the following procedure to upgrade your geo-replication Red Hat Quay deployment.

Important
  • When upgrading geo-replication Red Hat Quay deployments to the next y-stream release (for example, Red Hat Quay 3.7 Red Hat Quay 3.8), or geo-replication deployments, you must stop operations before upgrading.
  • There is intermittent downtime down upgrading from one y-stream release to the next.
  • It is highly recommended to back up your Red Hat Quay deployment before upgrading.

Prerequisites

  • You have logged into registry.redhat.io
Procedure

This procedure assumes that you are running Red Hat Quay services on three (or more) systems. For more information, see Preparing for Red Hat Quay high availability.

  1. Obtain a list of all Red Hat Quay instances on each system running a Red Hat Quay instance.

    1. Enter the following command on System A to reveal the Red Hat Quay instances: 

      $ sudo podman ps
      Copy to Clipboard Toggle word wrap

      Example output

      CONTAINER ID  IMAGE                                      COMMAND         CREATED        STATUS            PORTS                                        NAMES
ec16ece208c0  registry.redhat.io/quay/quay-rhel8:v{producty-n1}  registry        6 minutes ago  Up 6 minutes ago  0.0.0.0:80->8080/tcp, 0.0.0.0:443->8443/tcp  quay01
      Copy to Clipboard Toggle word wrap

    2. Enter the following command on System B to reveal the Red Hat Quay instances: 

      $ sudo podman ps
      Copy to Clipboard Toggle word wrap

      Example output

      CONTAINER ID  IMAGE                                      COMMAND         CREATED        STATUS            PORTS                                        NAMES
7ae0c9a8b37d  registry.redhat.io/quay/quay-rhel8:v{producty-n1}  registry        5 minutes ago   Up 2 seconds ago   0.0.0.0:82->8080/tcp, 0.0.0.0:445->8443/tcp  quay02
      Copy to Clipboard Toggle word wrap

    3. Enter the following command on System C to reveal the Red Hat Quay instances: 

      $ sudo podman ps
      Copy to Clipboard Toggle word wrap

      Example output

      CONTAINER ID  IMAGE                                      COMMAND         CREATED        STATUS            PORTS                                        NAMES
e75c4aebfee9  registry.redhat.io/quay/quay-rhel8:v{producty-n1}  registry        4 seconds ago   Up 4 seconds ago   0.0.0.0:84->8080/tcp, 0.0.0.0:447->8443/tcp  quay03
      Copy to Clipboard Toggle word wrap

  2. Temporarily shut down all Red Hat Quay instances on each system.

    1. Enter the following command on System A to shut down the Red Hat Quay instance: 

      $ sudo podman stop ec16ece208c0
      Copy to Clipboard Toggle word wrap

    2. Enter the following command on System B to shut down the Red Hat Quay instance: 

      $ sudo podman stop 7ae0c9a8b37d
      Copy to Clipboard Toggle word wrap

    3. Enter the following command on System C to shut down the Red Hat Quay instance: 

      $ sudo podman stop e75c4aebfee9
      Copy to Clipboard Toggle word wrap

  3. Obtain the latest Red Hat Quay version, for example, Red Hat Quay 3.16, on each system.

    1. Enter the following command on System A to obtain the latest Red Hat Quay version: 

      $ sudo podman pull registry.redhat.io/quay/quay-rhel8:{productminv}
      Copy to Clipboard Toggle word wrap

    2. Enter the following command on System B to obtain the latest Red Hat Quay version: 

      $ sudo podman pull registry.redhat.io/quay/quay-rhel8:v{producty}
      Copy to Clipboard Toggle word wrap

    3. Enter the following command on System C to obtain the latest Red Hat Quay version: 

      $ sudo podman pull registry.redhat.io/quay/quay-rhel8:{productminv}
      Copy to Clipboard Toggle word wrap

  4. On System A of your highly available Red Hat Quay deployment, run the new image version, for example, Red Hat Quay 3.16: 

    # sudo podman run --restart=always -p 443:8443 -p 80:8080 \
   --sysctl net.core.somaxconn=4096 \
   --name=quay01 \
   -v /mnt/quay/config:/conf/stack:Z \
   -v /mnt/quay/storage:/datastorage:Z \
   -d registry.redhat.io/quay/quay-rhel8:{productminv}
    Copy to Clipboard Toggle word wrap

  5. Wait for the new Red Hat Quay container to become fully operational on System A. You can check the status of the container by entering the following command: 

    $ sudo podman ps
    Copy to Clipboard Toggle word wrap

    Example output

    CONTAINER ID  IMAGE                                      COMMAND         CREATED        STATUS            PORTS                                        NAMES
70b9f38c3fb4  registry.redhat.io/quay/quay-rhel8:v{producty} registry        2 seconds ago   Up 2 seconds ago   0.0.0.0:82->8080/tcp, 0.0.0.0:445->8443/tcp  quay01
    Copy to Clipboard Toggle word wrap

  6. Optional: Ensure that Red Hat Quay is fully operation by navigating to the Red Hat Quay UI.

  7. After ensuring that Red Hat Quay on System A is fully operational, run the new image versions on System B and on System C.

    1. On System B of your highly available Red Hat Quay deployment, run the new image version, for example, Red Hat Quay 3.16: 

      # sudo podman run --restart=always -p 443:8443 -p 80:8080 \
   --sysctl net.core.somaxconn=4096 \
   --name=quay02 \
   -v /mnt/quay/config:/conf/stack:Z \
   -v /mnt/quay/storage:/datastorage:Z \
   -d registry.redhat.io/quay/quay-rhel8:{productminv}
      Copy to Clipboard Toggle word wrap

    2. On System C of your highly available Red Hat Quay deployment, run the new image version, for example, Red Hat Quay 3.16: 

      # sudo podman run --restart=always -p 443:8443 -p 80:8080 \
   --sysctl net.core.somaxconn=4096 \
   --name=quay03 \
   -v /mnt/quay/config:/conf/stack:Z \
   -v /mnt/quay/storage:/datastorage:Z \
   -d registry.redhat.io/quay/quay-rhel8:{productminv}
      Copy to Clipboard Toggle word wrap

  8. You can check the status of the containers on System B and on System C by entering the following command: 

    $ sudo podman ps
    Copy to Clipboard Toggle word wrap
トップに戻る
Red Hat logoGithubredditYoutubeTwitter

詳細情報

試用、購入および販売

コミュニティー

Red Hat ドキュメントについて

Red Hat をお使いのお客様が、信頼できるコンテンツが含まれている製品やサービスを活用することで、イノベーションを行い、目標を達成できるようにします。 最新の更新を見る.

多様性を受け入れるオープンソースの強化

Red Hat では、コード、ドキュメント、Web プロパティーにおける配慮に欠ける用語の置き換えに取り組んでいます。このような変更は、段階的に実施される予定です。詳細情報: Red Hat ブログ.

会社概要

Red Hat は、企業がコアとなるデータセンターからネットワークエッジに至るまで、各種プラットフォームや環境全体で作業を簡素化できるように、強化されたソリューションを提供しています。

Theme

© 2025 Red Hat