3.3. Configuring the Subnet

Configuring the Subnet Using the Web UI

1. On the Main Menu, click Infrastructure Subnets.

2. Click New Subnet and enter the information specific to your environment.

   1. If you use DHCP, enter the following information:

      • Name: Provisioning_Net
      • Network address: 172.17.13.0
      • Network mask: 255.255.255.0
      • Gateway Address: 172.17.13.1
      • Primary DNS Server: 172.17.13.2
      • Secondary DNS Server: Leave blank
      • IPAM: None
      • Start of IP Range: 172.17.13.100
      • End of IP Range: 172.17.13.150
      • VLAN ID: Leave blank
      • Boot Mode: DHCP

   2. If you use static IP addresses, enter the following information:

      • Name: Provisioning_Net
      • Network address: 172.17.13.0
      • Network mask: 255.255.255.0
      • Gateway Address: 172.17.13.1
      • Primary DNS Server: 172.17.13.2
      • Secondary DNS Server: Leave blank
      • IPAM: None
      • Start of IP Range: 172.17.13.100
      • End of IP Range: 172.17.13.150
      • VLAN ID: Leave blank
      • Boot Mode: Static
3. Click Submit.
4. Click Provisioning_Net to edit the subnet.
5. On the Domains tab, select example.org.
6. On the Capsules tab, change the TFTP and Discovery Proxy capsule to reflect the host name of the Satellite Server.
7. On the Locations tab, select Default_Location under All items to associate the domain with the default location.
8. On the Organizations tab, select Default_Organization under All items to associate the domain with the default organization.