이 콘텐츠는 선택한 언어로 제공되지 않습니다.

9.6. Using queue statistics

Functions with the qsq_ prefix query the statistics averaged since the first queue operation or when qsq_start was called. Since statistics are often fractional, a scale parameter multiplies the result to a more useful scale. For some fractions, a scale of 100 returns percentage numbers.

9.6.1. qsq_blocked
링크 복사

General syntax:

qsq_blocked:long (qname:string, scale:long)

qsq_blocked:long (qname:string, scale:long)

Copy to Clipboard

Toggle word wrap

This function returns the fraction of elapsed time during which one or more requests were on the wait queue.

9.6.2. qsq_print
링크 복사

General syntax:

qsq_print:unknown (qname:string)

qsq_print:unknown (qname:string)

Copy to Clipboard

Toggle word wrap

This function prints a line containing the following statistics for the given queue:

queue name
average rate of requests per second
average wait queue length
average time on the wait queue
average time to service a request
percentage of time the wait queue was used
percentage of time any request was being serviced

9.6.3. qsq_service_time
링크 복사

General syntax:

qsq_service_time:long (qname:string, scale:long)

qsq_service_time:long (qname:string, scale:long)

Copy to Clipboard

Toggle word wrap

This function returns the average time in microseconds required to service a request once it is removed from the wait queue.

9.6.4. qsq_start
링크 복사

General syntax:

qsq_start:unknown (qname:string)

qsq_start:unknown (qname:string)

Copy to Clipboard

Toggle word wrap

This function resets the statistics counters for the given queue, and restarts tracking from the moment the function was called. This command is used to create a queue.

9.6.5. qsq_throughput
링크 복사

General syntax:

qsq_throughput:long (qname:string, scale:long)

qsq_throughput:long (qname:string, scale:long)

Copy to Clipboard

Toggle word wrap

This function returns the average number of requests served per microsecond.

9.6.6. qsq_utilization
링크 복사

General syntax:

qsq_utilization:long (qname:string, scale:long)

qsq_utilization:long (qname:string, scale:long)

Copy to Clipboard

Toggle word wrap

This function returns the average time in microseconds that at least one request was being serviced.

9.6.7. qsq_wait_queue_length
링크 복사

General syntax:

qsq_wait_queue_length:long (qname:string, scale:long)

qsq_wait_queue_length:long (qname:string, scale:long)

Copy to Clipboard

Toggle word wrap

This function returns the average length of the wait queue.

9.6.8. qsq_wait_time
링크 복사

General syntax:

qsq_wait_time:long (qname:string, scale:long)

qsq_wait_time:long (qname:string, scale:long)

Copy to Clipboard

Toggle word wrap

This function returns the average time in microseconds that it took for a request to be serviced (qs_wait() to qs_done()).

9.6.9. A queue example
링크 복사

What follows is an example from src/testsuite/systemtap.samples/queue_demo.stp. It uses the randomize feature of the timer probe to simulate queuing activity.

probe begin {
qsq_start ("block-read")
qsq_start ("block-write")
}

probe timer.ms(3500), end {
qsq_print ("block-read")
qsq_start ("block-read")
qsq_print ("block-write")
qsq_start ("block-write")
}

probe timer.ms(10000) {
exit ()
}

# synthesize queue work/service using three randomized "threads" for each queue.
global tc

function qs_doit (thread, name) {
n = tc[thread] = (tc[thread]+1) % 3 # per-thread state counter
if (n==1) qs_wait (name)
else if (n==2) qs_run (name)
else if (n==0) qs_done (name)
}

probe timer.ms(100).randomize(100) { qs_doit (0, "block-read") }
probe timer.ms(100).randomize(100) { qs_doit (1, "block-read") }
probe timer.ms(100).randomize(100) { qs_doit (2, "block-read") }
probe timer.ms(100).randomize(100) { qs_doit (3, "block-write") }
probe timer.ms(100).randomize(100) { qs_doit (4, "block-write") }
probe timer.ms(100).randomize(100) { qs_doit (5, "block-write") }

probe begin {
qsq_start ("block-read")
qsq_start ("block-write")
}

probe timer.ms(3500), end {
qsq_print ("block-read")
qsq_start ("block-read")
qsq_print ("block-write")
qsq_start ("block-write")
}

probe timer.ms(10000) {
exit ()
}

# synthesize queue work/service using three randomized "threads" for each queue.
global tc

function qs_doit (thread, name) {
n = tc[thread] = (tc[thread]+1) % 3 # per-thread state counter
if (n==1) qs_wait (name)
else if (n==2) qs_run (name)
else if (n==0) qs_done (name)
}

probe timer.ms(100).randomize(100) { qs_doit (0, "block-read") }
probe timer.ms(100).randomize(100) { qs_doit (1, "block-read") }
probe timer.ms(100).randomize(100) { qs_doit (2, "block-read") }
probe timer.ms(100).randomize(100) { qs_doit (3, "block-write") }
probe timer.ms(100).randomize(100) { qs_doit (4, "block-write") }
probe timer.ms(100).randomize(100) { qs_doit (5, "block-write") }

Copy to Clipboard

Toggle word wrap

This prints:

block-read: 9 ops/s, 1.090 qlen, 215749 await, 96382 svctm, 69% wait, 64% util
block-write: 9 ops/s, 0.992 qlen, 208485 await, 103150 svctm, 69% wait, 61% util
block-read: 9 ops/s, 0.968 qlen, 197411 await, 97762 svctm, 63% wait, 63% util
block-write: 8 ops/s, 0.930 qlen, 202414 await, 93870 svctm, 60% wait, 56% util
block-read: 8 ops/s, 0.774 qlen, 192957 await, 99995 svctm, 58% wait, 62% util
block-write: 9 ops/s, 0.861 qlen, 193857 await, 101573 svctm, 56% wait, 64% util

block-read: 9 ops/s, 1.090 qlen, 215749 await, 96382 svctm, 69% wait, 64% util
block-write: 9 ops/s, 0.992 qlen, 208485 await, 103150 svctm, 69% wait, 61% util
block-read: 9 ops/s, 0.968 qlen, 197411 await, 97762 svctm, 63% wait, 63% util
block-write: 8 ops/s, 0.930 qlen, 202414 await, 93870 svctm, 60% wait, 56% util
block-read: 8 ops/s, 0.774 qlen, 192957 await, 99995 svctm, 58% wait, 62% util
block-write: 9 ops/s, 0.861 qlen, 193857 await, 101573 svctm, 56% wait, 64% util

Copy to Clipboard

Toggle word wrap

맨 위로 이동

이 콘텐츠는 선택한 언어로 제공되지 않습니다.

9.6. Using queue statistics

9.6.1. qsq_blocked
링크 복사

9.6.2. qsq_print
링크 복사

9.6.3. qsq_service_time
링크 복사

9.6.4. qsq_start
링크 복사

9.6.5. qsq_throughput
링크 복사

9.6.6. qsq_utilization
링크 복사

9.6.7. qsq_wait_queue_length
링크 복사

9.6.8. qsq_wait_time
링크 복사

9.6.9. A queue example
링크 복사

자세한 정보

평가판, 구매 및 판매

커뮤니티

Red Hat 문서 정보

보다 포괄적 수용을 위한 오픈 소스 용어 교체

Red Hat 소개

Theme

Red Hat legal and privacy links

Red Hat legal and privacy links

이 콘텐츠는 선택한 언어로 제공되지 않습니다.

9.6. Using queue statistics

9.6.1. qsq_blocked링크 복사링크가 클립보드에 복사되었습니다!

9.6.2. qsq_print링크 복사링크가 클립보드에 복사되었습니다!

9.6.3. qsq_service_time링크 복사링크가 클립보드에 복사되었습니다!

9.6.4. qsq_start링크 복사링크가 클립보드에 복사되었습니다!

9.6.5. qsq_throughput링크 복사링크가 클립보드에 복사되었습니다!

9.6.6. qsq_utilization링크 복사링크가 클립보드에 복사되었습니다!

9.6.7. qsq_wait_queue_length링크 복사링크가 클립보드에 복사되었습니다!

9.6.8. qsq_wait_time링크 복사링크가 클립보드에 복사되었습니다!

9.6.9. A queue example링크 복사링크가 클립보드에 복사되었습니다!

자세한 정보

평가판, 구매 및 판매

커뮤니티

Red Hat 문서 정보

보다 포괄적 수용을 위한 오픈 소스 용어 교체

Red Hat 소개

Theme

Red Hat legal and privacy links

Red Hat legal and privacy links

9.6.1. qsq_blocked
링크 복사

9.6.2. qsq_print
링크 복사

9.6.3. qsq_service_time
링크 복사

9.6.4. qsq_start
링크 복사

9.6.5. qsq_throughput
링크 복사

9.6.6. qsq_utilization
링크 복사

9.6.7. qsq_wait_queue_length
링크 복사

9.6.8. qsq_wait_time
링크 복사

9.6.9. A queue example
링크 복사