Red Hat Summit Red Hat Summit지원콘솔개발자평가판 시작연락처

이 콘텐츠는 선택한 언어로 제공되지 않습니다.

Chapter 2. Getting Started with Fuse Fabric

Abstract

This tutorial provides basic information and explains how to set up the simplest Fabric system, by creating some containers that run on your local machine and then deploying an example profile to a child container.
Additional information on setting up a Fabric is covered in more detail in both Chapter 3, Creating a New Fabric and Section 4.1, “Child Containers”.

2.1. Create a Fabric
링크 복사

Overview
링크 복사

Figure 2.1 shows an overview of a sample fabric that you will create. The Fabric Ensemble consists of just one Fabric Server (making this fabric suitable only for experimental use) and two managed child containers.

Figure 2.1. A Sample Fabric with Child Containers

A Sample Fabric with Child Containers
View larger image
A Sample Fabric with Child Containers

Steps to create the fabric
링크 복사

To create the simple fabric shown in Figure 2.1, “A Sample Fabric with Child Containers”, follow these steps:
  1. To create the first fabric container, which acts as the seed for the new fabric, enter this console command: 
    JBossFuse:karaf@root> fabric:create --new-user AdminUser --new-user-password AdminPass
  --zookeeper-password ZooPass
  --resolver manualip --manual-ip 127.0.0.1 --wait-for-provisioning
    Copy to Clipboard Toggle word wrap
    The current container, named root by default, becomes a Fabric Server with a registry service installed. Initially, this is the only container in the fabric. The --new-user and --new-user-password options specify the credentials for a new administrator user. The Zookeeper password is used to protect sensitive data in the Fabric registry service (all of the nodes under /fabric). The --manual-ip option specifies the loopback address, 127.0.0.1, as the Fabric Server's IP address.
    Note
    A Fabric Server requires a static IP address. For simple trials and tests, you can use the loopback address, 127.0.0.1, to work around this requirement. But if you are deploying a fabric in production or if you want to create a distributed ensemble, you must assign a static IP address to the each of the Fabric Server hosts.
    Note
    Most of the time, you are not prompted to enter the Zookeeper password when accessing the registry service, because it is cached in the current session. When you join a container to a fabric, however, you must provide the fabric's Zookeeper password.
  2. Create a child container. Assuming that your root container is named root, enter this console command: 
    JBossFuse:karaf@root> fabric:container-create-child root child
The following containers have been created successfully:
	Container: child.
    Copy to Clipboard Toggle word wrap
  3. Invoke the following command to monitor the status of the child container, as it is being provisioned: 
    JBossFuse:karaf@root> shell:watch container-list
    Copy to Clipboard Toggle word wrap
    After the deployment of the child has completed, you should see a listing something like this: 
    JBossFuse:karaf@root> shell:watch container-list
[id]                           [version] [alive] [profiles]                     [provision status]
root                           1.0       true    fabric, fabric-ensemble-0000-1, fuse-esb-full success
  child                        1.0       true    default                        success
    Copy to Clipboard Toggle word wrap
    Type the Return key to get back to the JBoss Fuse console prompt.
맨 위로 이동
Red Hat logoGithubredditYoutubeTwitter

자세한 정보

평가판, 구매 및 판매

커뮤니티

Red Hat 문서 정보

Red Hat을 사용하는 고객은 신뢰할 수 있는 콘텐츠가 포함된 제품과 서비스를 통해 혁신하고 목표를 달성할 수 있습니다. 최신 업데이트를 확인하세요.

보다 포괄적 수용을 위한 오픈 소스 용어 교체

Red Hat은 코드, 문서, 웹 속성에서 문제가 있는 언어를 교체하기 위해 최선을 다하고 있습니다. 자세한 내용은 다음을 참조하세요.Red Hat 블로그.

Red Hat 소개

Red Hat은 기업이 핵심 데이터 센터에서 네트워크 에지에 이르기까지 플랫폼과 환경 전반에서 더 쉽게 작업할 수 있도록 강화된 솔루션을 제공합니다.

Theme

© 2025 Red Hat